Used Quad 400 for sale (18,195)

Condition: used, Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: - Length: 950 mm - Width: 600 mm - Cutting height: approx. 60 mm - Motor: 2.2 kW - Connection: 16 A / 400 V Csdpjzryt Sefx Ah Isha

Condition: used, Year of construction: 2021, total length: 7,800 mm, - Max. Arbeitshöhe Straße: 14,10 m - Max. Arbeitshöhe Maschine stehend Schiene: 14,40 m - Max. Arbeitshöhe bei Fahrt Schiene: 12,90 m - Max. Plattformhöhe Straße: 12,10 m - Max. Plattformhöhe Maschine stehend Schiene 12,40 m - Max. Plattformhöhe bei Fahrt Schiene 10,90 m - Max. seitliche Reichweite Straße 9,30 m - Max. seitliche Reichweite Maschine stehend 9,30 m - Max. seitliche Reichweite bei Fahrt Schiene - Max. Traglast Arbeitskorb 400 kg - Drehbereich 180 Grad - Steuerung: proportional - Max. Fahrgeschwindigkeit Straße: 4 km/h Chedpfozrzzwex Ah Ioa - Max. Fahrgeschwindigkeit Schiene 18 km/h - Korbdrehung: 90 Grad

Condition: used, Year of construction: 2012, operating hours: 55,400 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Chodpfx Aheylpy Aj Iea

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) Cedoylpyvjpfx Ah Ioha delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Chedjv S H Rhopfx Ah Ioa Payment terms: 100% before taking delivery of the machine, net

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) delivery time: on request Cjdpfxjv S H Rbe Ah Ijha terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm Chedpfxezrpqge Ah Iea ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Chjdpfxozrpuxj Ah Ija Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm Chedpfx Aszrpt Ush Isa power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear With pipe shear clamp on the bar shear Foot switch for lift release support table on the stamping side Quick-change device Chedpfxjw Im Shj Ah Isa Great condition Range of tools included in the price

Condition: used, mileage: 508,348 km, power: 294 kW (399.73 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 8,600 mm, total width: 2,550 mm, total height: 3,140 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Lane keeping assist - Fabric Number of axles: 3, Configuration: 6x2, Payload: 15930 kg, Unladen weight: 12070 kg, Gross vehicle weight: 28000 kg, Total tank capacity: 640 liters, Tow hitch, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 14101 kg, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 460 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Flashing lights, Engine power: 294 kW (394 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, System length: 595 cm, Manufacturer of hooklift and cable system: VDL, Pump, Hooklift height: 128, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 6 mm; Tire tread depth right outside: 7 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Lift axle; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Weights Unladen weight: 12,070 kg Payload: 15,930 kg GVW: 28,000 kg Csdpezp Elbjfx Ah Ijha Functional Loading platform height: 126 cm Pump: Yes Condition Overall condition: very bad Technical condition: very bad Optical condition: very bad Damage: none Number of keys: 1 Identification License plate: 20-BKF-5 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our...

Condition: good (used), mileage: 1,208,375 km, power: 294 kW (399.73 HP), first registration: 09/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,200 mm, total width: 2,550 mm, total height: 4,030 mm, loading space length: 7,550 mm, loading space width: 2,500 mm, loading space height: 2,730 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Tail lift - Manual - Reversing camera - Space Cab - Lane keeping assist - Fabric Number of axles: 2, Configuration: 4x2, Payload: 8435 kg, Unladen weight: 11065 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 750 liters, Unbraked trailer load: 750 kg, Braked trailer load, middle axle: 24000 kg, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling capacity: 118 tons, Suspension type: Air suspension, Cab type: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Multi-colored, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Engine power: 294 kW (394 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, System type: ., Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 200x252, Battery for loading ramp, TAILLIFT, Spare wheel, Spare wheel tread depth: 5% Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Weights Unladen weight: 11,065 kg Payload: 8,435 kg GVW: 19,500 kg Functional Tail lift: Dhollandia, Rear door, 2000 kg Loading platform height: 118 cm Maintenance APK (Technical Inspection): valid until 09.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: 21-BJX-1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and models from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Csdpfozp Ekkjx Ah Ieha Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Please find below the details regarding the equipment available for sale: ARISA 400-ton Mechanical Press (S-2-400-160-FS) + DIMECO Feeder Line – Year 2001 Description: Complete ARISA 400-ton mechanical press for cutting/forming, with its automatic DIMECO feeder line (uncoiler/feeder). Chsdpfozpz U Sjx Ah Iea Technical Specifications: ARISA Press: - Brand / Model: ARISA S-2-400-160-FS (No. 400365947) - Year: 2001 | Standard: CE - Rated force: 4,000 kN (400 tons) - Stroke (Min / Max): 25 - 250 mm - Stroke rate: 25 to 100 strokes/min - Closed height: 485 mm | Slide adjustment: 200 mm - Power: 55 kW | Press weight: 65,000 kg (65 tons) ARISA Moving Table: - Model: Type 934.34 (No. 934345950) - Table dimensions (L x W): 1,700 × 1,300 mm - Max. tool load: 6,000 kg | Floor to table height: 1,025 mm DIMECO Uncoiling Line: - Includes: Single/double mandrel uncoiler + straightener/feeder + loop control - Max. coil capacity: 6,000 kg We remain at your disposal for any further information. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Cjdozpz Dmspfx Ah Isha Here are the complete technical specifications: General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations) Chjdpezadb Rsfx Ah Ioa

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Codpfxozh Ip To Ah Ieha Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Chodpezpwixsfx Ah Ija Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials Chjdpfx Ajzqnxteh Ija - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: ready for operation (used), Year of construction: 2007, clamping force: 1,000 kN, This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) Codex D Hgvspfx Ah Isha • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Codpfx Asvvi N Ioh Ieha

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Chedpjzp Slzofx Ah Isa Drive motor: 22 kW

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Dimensions: see photos -Number: 2x prism block available -Price: per piece -Dimensions: 400/300/H180 mm -Weight: 27.9 kg Cjdpfx Ahjzn I Rks Ieha

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H Chedozn N R Eepfx Ah Ija C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Chsdpfeilp Eusx Ah Ija Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2008, offer consists of: laminating machine Gemini C 400 A with jogger - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Csdezpwkvepfx Ah Ijha Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs