Used Radius Rotary Apparatus for sale (5,424)

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m Njdpfxei Hg I Ds Adxsdd welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Ndedpfx Aohy T Nvjdxjd Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 Nsdpfowugczsx Adxsdd 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), functionality: fully functional, power: 45 kW (61.18 HP), Equipment: CE marking, Sullair LS-16 air compressor with very low hours. Available for demonstration. Ndodoxv Arlopfx Adxsd

Condition: excellent (used), Year of construction: 2008, PADOVAN TAYLO LUX 10 ROTARY PRECOAT VACUUM DRUM FILTER ROTARY VACUUM FILTER FOR WINE LEES, GRAPE JUICE AND CARBOHYDRATES – TAYLO DRUM AREA - 10,5 Sq. m. Vacuum filtration on kieselguhr prepanel or perlite. Processing steps: - Pre-panel formation; Ndodjv Ivm Dspfx Adxed - Filtration and drainage; - Cutting and draining the panel; - Extraction of the filtrate; - Filtration of residual liquid and filter washing at the end of filtration. EXCELLENT CONDITION. LOCATION - POLAND.

Condition: new, - Capacity horizontal 1200 kg - Capacity vertical 600 kg - table size 550 mm - Table size 1000 mm - Electrically inclinable - Cable remote control - Digital display - Documentation Nsdpfx Ajligqcedxsdd - 400V

Year of construction: 2002, condition: repair required (used), Rotary oven Wachtel Comet - used - year of manufacture: 2002 - electric Nodpexx Tx Uefx Adxodd - power: 90 kW - for trays 58 x 98 cm - oven removed from production, requires inspection/repair - fully assembled - electronic control - without racks - collection from warehouse / shipping option - price on request

Condition: used, Dreh- und kippbar für Schweißpistole oder für Plasma condition nicht geprüft +++++ Nodpfsidv Erjx Adxjdd Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 752588, grinding length: 2,000 mm, grinding width: 500 mm, overall weight: 12,000 kg, disc diameter: 700 mm, with magnetic clamping plate 2000x700mm due to insolvency Ndedpfx Adsxlaa Eoxod

Condition: used, Rotary table, welding rotator, IMA MA Retainer AK2, Used machine Manufacturer: IMA Automation GMBH Type: MA Retainer AK2 Overall dimensions: Ndodpfx Aoxupz Dedxod Width: 1480 mm Depth: 1480 mm Height: 1620 mm Electrical data: 400V; Table diameter: 860 mm

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 Ndedpfx Adjhq Uklsxjd 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: new, - Capacity horizontal 3000 kg - Capacity vertical 3000 kg - Table size 1400 mm - Electrically tiltable - Wired remote control - Digital display Ndjdpepa Ugasfx Adxod - Documentation - 400V

Year of construction: 2024, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. Ndodoxqdp Iopfx Adxjd For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 1966, table diameter 44 mm table load . t Nedpfx Adjud Trqexodd table height . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m

Year of construction: 1986, condition: good (used), Rotary filler with 1 head. Cup size round: 85 mm. Nedpfelyqu Rjx Adxodd Stations: cup destacking, main doser (150 - 250 ml) for viscose liquid products, with hopper lid dispensing by vacuum, heat sealing, snap-on lid capper. With outfeed conveyor. Machine has plexiglas safety guards. Controls: Siemens, model: S5 . Total dimensions: 160 x 170 x 300 cm. 3Kw/230/380V 2700/hr machine can be sold as-is or adjusted to customer needs. more pictures on request

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable Ndjdpfxjxabm Nj Adxjd - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: excellent (used), 1.- Faceplate size..... Ø350 mm 2.- Centre bore ..... Ø52H7 3.- Plate height (Vertical axis) ..... 300 mm 4.- Centre height (Horizontal axis)..... 300 mm 5.- Overall height ..... 450 mm 6.- "T" slot width ..... Central 12H7//Rest 12H10 7.- Clamping system in both axes ..... Hydraulic 8.- Load capacity (centred in plate): * Vertical axis (Horizontal plate)..... 200 Kg * Horizontal axis (Vertical plate)..... 200 Kg * With tailstock..... 300 Kg 9.- Rotating axis allowable torque (70- 90/1-R)..... 1.400 Nm 10.- Tilting axis allowable torque (70- 90/1-R)..... 1.400 Nm 11.- Resolution in both axes..... 0,001º 12.- Rotating axis transmission ratio ..... 180/1 Ndsdpfjhq Un Njx Adxsd 13.- Tilting axis transmission ratio ..... 180/1 14.- Rotating axis indexing accuracy (Heidenhain ROD285C) ... ± 7 sec. 15.- Tilting axis indexing accuracy (Heidenhain ROD285C) ..... ± 7 sec. 16.- Rotating axis clamping pressure..... 50 BAR 17.- Tilting axis clamping pressure..... 80 BAR 18.- Rotating axis clamping torque..... 1.200 Nm 19.- Tilting axis clamping torque..... 2.800 Nm 20.- Rotating axis motor speed ..... 2.000 rpm 21.- Tilting axis motor speed ..... 2.000 rpm 22.- Rotating axis speed..... 22,22 rpm 23.- Tilting axis speed ..... 22,22 rpm 24.- Rotating axis recommended motor torque..... 8 ¸ 12 Nm 25.- Tilting axis recommended motor torque..... 12 ¸ 18 Nm 26.- Rotating axis max. transmissible torque ..... 430 ¸ 645 Nm 27.- Tilting axis max. transmissible torque ..... 645 ¸ 970 Nm 28.- Weight (approx.- without motors)..... 600 Kg NOTE: PRICE INCLUDES ROTARY TABLE + 2 ENCODERS + 2 MOTORS

Condition: used, Rotating table, welding rotator, rotating workpiece table, Used machine Manufacturer: Weiss GMBH Type: TC 150-08 Overall dimensions: Width: 400 mm Depth: 320 mm Height: 130 mm Electrical data: 400V, 0.11kW Nedpfextwruex Adxjdd Table size: Ø 320 mm

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Ndjderc D Nrspfx Adxjd Your specialist and contact for intralogistics

Condition: used, Year of construction: 1986, table length . mm Ndedpsucguisfx Adxjd table width . mm table load 3 t turning speeds Poti U/min weight of the machine ca. 2 t

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 80 mm, overall weight: 12 kg, table height: 80 mm, rotary table diameter: 150 mm, table load: 40 kg, distance table to spindle center: 102 mm, turntable diameter: 150 mm, Rotary Table HV-6 for horizontal and vertical use Producer: VERTEX Type: HV-6 Year of Construction: 2023 Serial Number: - Direction of Use: horizontal, vertical Mounting Plate: Ø 150mm Centre Sleeve: MK2 through hole Flatness of Clamping Surface: ±0,015mm/100mm Parallelism of Clamping Surface to Ground: ±0,02mm/100mm True Running of Clamping Surface: ±0,015mm/100mm Workpiece Weight horizontally: max. 40 kg Workpiece Weight vertically: max. 20 kg Weight: 12,1 kg Scale Ring: 360° Quick clamping device: yes Gear: Worm gear ground, hardened & adjustable, 90:1 Location: Austria / Vienna Condition: new, originally packed Description: Simply viewed, a dividing head is a turntable on which a workpiece can be attached directly or using clamping aids. The plate can be rotated to any desired angle, either with a crank and scale ring or with high precision using a pin and a perforated disk (optional accessory). Application: Support Tool for the production of gears, belt wheels, perforated disks, ... Ndjdpfxjpr Utzo Adxsd Dimensions: See Illustration

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg Njdoxpggyepfx Adxjdd

Condition: used, Year of construction: 1990, the machine is in perfect condition and without problems Nodewmmy Dopfx Adxodd

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2008. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Njdpfx Aotpgxzsdxodd Packaging and loading included.

Condition: new, Year of construction: 2023, functionality: fully functional, faceplate diameter: 110 mm, working height: 72 mm, Rotary Table HV-4 for horizontal and vertical use Producer: VERTEX Type: HV-4 Year of Construction: 2023 Serial Number: - Direction of Use: horizontal, vertical Mounting Plate: Ø 110mm Centre Sleeve: MK2 through hole Flatness of Clamping Surface: ±0,015mm/100mm Parallelism of Clamping Surface to Ground: ±0,02mm/100mm True Running of Clamping Surface: ±0,015mm/100mm Workpiece Weight horizontally: max. 35 kg Workpiece Weight vertically: max. 18 kg Weight: 7 kg Scale Ring: 360° Quick clamping device: yes Gear: Worm gear ground, hardened & adjustable, 90:1 Ort: Austria / Vienna Condition: new, originally packed Description: Simply viewed, a dividing head is a turntable on which a workpiece can be attached directly or using clamping aids. The plate can be rotated to any desired angle, either with a crank and scale ring or with high precision using a pin and a perforated disk (optional accessory). Nsdjpr Ur Sjpfx Adxedd Application: Support Tool for the production of gears, belt wheels, perforated disks, ... Dimensions see drawing