Used Range Rings for sale (16,883)

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck or stringer pallets (2-way pallets). Motorized conversion for stringer channels. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks and pallets. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks/stringer pallets. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Dimensions for standard machine: - Deck board: Length 600-3500mm, Width 75-125mm, Height 16-50mm Redpfoh Dpv Hex Amtocf - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-100mm - Deck/Stringer pallet size: Length 600-3500mm, Width 600-1500mm Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 4400mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. Rodped Evcwofx Amtecf DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Condition: used, mileage: 152,089 km, power: 390 kW (530.25 HP), first registration: 10/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 02/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,990 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #637 Mercedes Arocs 3753 8x4 BB Wiedemann Super 1000 11.0/2.2/0.8/1000K Superstructure ? Wiedemann enviro tec ? Super 1000 11.0/2.2/0.8/1000K water recycling ? 14,000 liter tank capacity ? 800 liters of fresh water ? 2,200 liters of rinsing water ? 11,000 liters of sludge volume ? Emptied by tilting the tank 45° Vacuum System Rodpey U Tgyofx Amtecf ? KW3000 ? approx. 3,000 m³/h ? Water ring pump ? Suction hose reel on the tank ? approx. 25m DN125 ? Hydraulic reel on the left side of the tank ? DN125 Perrot-V remote controlled ? Aerokill system High-Pressure System ? URACA P3-45-65 with approx. 407 l/min at 175 bar ? Hydraulic reel on the boom, suitable for approx. 180m DN32 ? approx. 160m DN32 Parker plastic hose ? Speck NP 25/50-150 with approx. 50 l/min at 100 bar ? Hydraulic reel on the boom, suitable for 80m DN13 ? approx. 80m DN13 ? Spring-loaded reel with approx. 10m DN10 Special Features ? Sludge tank made of stainless steel, electropolished ? Boom arm mounted in the center at the rear ? Telescopic boom ? Working range 180° / 2x90° ? Suction hose and rinsing hose guide ? Soundproofing cladding ? Vice ? Waste container / scrap box ? Hand washing facility ? Advertising panels L+R integrated ? Nozzle display for 8 nozzles ? Ladder ? 2x spring-loaded rollers ? Central lubrication system ? Suction pipe ? IFM CAN control with display ? Reversing camera ? Radio remote control ? Battery charger for remote control ? Halogen light at the rear ? Rotating beacon cab 2x / superstructure 2x Technical Data ? Mercedes-Benz Arocs 3753 ? 8x4 ? EURO VI ? 530 hp / 390 kW ? 2,600 Nm ? Automatic transmission ? Twin-plate clutch ? Outer planetary drive axle AP ? Air horns ? M-cab ClassicSpace 2,300 mm ? Driver and passenger suspension seats ? Navigation ? Hands-free system ? Leaf spring suspension front and rear ? Tires front 385/65 R22.5 ? Tires rear 315/80 R22.5 ? Unladen weight 22,397 kg ? Gross vehicle weight 37,000 kg ? Length 10,730 mm ? Height 3,990 mm ? Width 2,550 mm For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Changes, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Rcedpfx Aezb Eixemtef Motorized revolving head Motorized precision stand VHX-S770E Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Rcedpfx Aszh Iqwsmtef Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm Rjdpfx Amelu N Edetecf -Weight: 26 kg/pc.

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm Rsdpekm Rm Ajfx Amtecf -Weight: 35 kg

Condition: used, Year of construction: 2017, color: red, overall weight: 16,000 kg, maximum load weight: 12,500 kg, empty load weight: 3,500 kg, loading space volume: 51 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,680 mm, first registration: 11/2017, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40406 Krone, Swap Body / Container * Year of manufacture: 2017 * 7.82 m * Fixed roof * Load Securing Certificate DIN EN 12642 Code XL * Retractable lashing rings * Portal doors Rsdpfsyiculox Amtecf * Textile version * Complete double-deck incl. support beams * Suitable for rail transport – crane-loadable * Miscellaneous / other * Gross vehicle weight: 16,000 kg * Unladen weight: 3,500 kg * Payload: 12,500 kg * Permissible gross weight: 16,000 kg * Internal dimensions: L = 7,700 mm, W = 2,480 mm, H = 2,680 mm * Internal volume*: 51 m³ * Corner fitting dimension E = 5,853 mm * Overhang dimension 983 mm * Pallet spaces: 19 * Krone swap body 7.82 * Customs plate Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. You can find additional photos and videos on our website. Our comprehensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Our trained sales staff will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 10,500 W, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, total width: 1,300 mm, total height: 1,720 mm, bar diameter (max.): 25 mm, controller manufacturer: FANUC, controller model: Series 0i-TF Plus, product length (max.): 2,166 mm, number of axes: 5, This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details. Rodpfx Aozl A Sdsmtocf • Max bar capacity: 25.4 mm (up to 26 mm depending on collets) • Main spindle (Z1): 10,000 rpm; 8.2 kW nominal / 10.5 kW peak; 26 Nm; liquid-cooled • Counter-spindle (X4/Z4): 10,000 rpm; 1.5 kW nominal / 2.2 kW peak • Linear axes: 5 (X1, Y1, Z1, X4, Z4) • C-axes: 2 (C1 on main spindle, C4 on counter-spindle) • Operation mode: With or without guide bush (direct drive guide bush) • Total tool capacity: up to 22 tools • Live (driven) tool positions: up to 8 • Electrical connection: 400 V, 3-phase, 50/60 Hz • Installed power: 24 kVA • Nominal current: 35 A • Fuse rating: 50 A • Auxiliary voltage: 24 V DC • Control voltage: 220 V Additional equipment • Bar feeder: Tornos Robobar SBF 326 • Bar diameter range: 3–26 mm • Guidance: Hydrodynamic oil-filled guide channels • Interface: Delta HMI touch screen independent control panel • Quick change: Tool-less replacement of pusher and guide bushings • Chip conveyor: Ring Sun RSCW50 • Model: RSCW50; Serial: TA39614110 • Motor power: 0.2 kW • Operating voltage: 400 V, 50/60 Hz • Weight: 313 kg • YOM: 2022-06 • Mist extraction/filtration: Micronfilter Kube Series oil mist collector (mounted on top-left bracket system) Technical Specification Counter Spindle Yes

Condition: excellent (used), Equipment: type plate available, ZEISS O-INSPECT 442 Multisensor CNC Coordinate Measuring Machine Manufacturer: Carl Zeiss IMT GmbH, Germany Type: O-INSPECT 442 Machine Type: Multisensor CNC Coordinate Measuring Machine Measuring Range: 400 × 400 × 200 mm For sale is a used ZEISS O-INSPECT 442 coordinate measuring machine, including a comprehensive set of original ZEISS accessories, measuring sensors, software, and a vibration isolation platform. The O-INSPECT 442 combines highly precise optical and tactile measuring technology in a CNC-controlled measuring machine. The combination of ZEISS Discovery V12 zoom optics, VAST XXT probe system, and the installed ZEISS CALYPSO 2019 measuring software makes this system ideally suited for quality assurance, incoming goods inspection, toolmaking, precision engineering, medical technology, research, and development. Technical Data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: 622810-9806-000 Serial Number: 138890 Year of Manufacture: 2008 Measuring Range X: 400 mm Measuring Range Y: 400 mm Measuring Range Z: 200 mm Max. Workpiece Weight: 40 kg Supply Voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 1500 VA Measuring System: ZEISS VAST XXT tactile measuring system ZEISS Discovery V12 telecentric zoom objective White light distance sensor Coaxial top light Through-light illumination 16-segment multi-color ring light Automatic CNC measuring cycles Software: ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Documentation Dimensions: Machine (W × D × H): approx. 1,055 × 1,351 × 1,770 mm Rcodezl Dkuspfx Amtsf Weight: Coordinate measuring machine: approx. 800 kg Bilz vibration isolation platform: approx. 360 kg Total weight: approx. 1,160 kg Equipment: ZEISS O-INSPECT 442 coordinate measuring machine ZEISS VAST XXT probe system ZEISS Discovery V12 zoom optics Original ZEISS control panel ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Reference standard Comprehensive set of ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Clamping technology and other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Scope of Delivery: ZEISS O-INSPECT 442 coordinate measuring machine Original ZEISS control panel 2 Industrial PCs 2 Monitors ZEISS CALYPSO 2019 measuring software Original software media Original ACRONIS recovery/boot media Documentation Reference standard ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Comprehensive clamping and holding devices Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, mileage: 222,050 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 7,000 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 4936B ----Why autonext? Over 400 immediately available passenger cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - Top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available at autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, Non-smoking vehicle Complete service history, only serviced at Mercedes Benz Next service due in 37,500 km New front brakes Like-new all-season tires front and rear Permissible total weight: 7,000 kg Twin tires Manufacturer: RICO Gesellschaft für Mikroelektronik mbH Type: HIGHLANDER Operating voltage: 230 volts Frequency: 50 Inverter "Victory energy" Self-propelled work machine: EDD Mod. 4 Compressed air system Exterior socket Roof air conditioning "Dometic" Regulated air conditioning (Tempmatik) Auxiliary heater Rear view camera Trailer coupling, increased towing capacity 3,500 kg Rjdpfxezhbg Eo Amtecf Speed control system (cruise control) 230V sockets Reinforced front stabilizer LED cargo area light Comfort suspension seat Rotating beacon ---- Special equipment: * Windows for rear doors in black tinted glass * Heated rear window * Storage compartment in the headliner of the cab * Airbag on passenger side * Hill-start assist * Trailer socket 13-pin * Audio system Sound 5 * Outside temperature display * Battery 100 Ah * Roof control unit with reading lamp driver/passenger side * Entry lights * Digital tachograph * Window in cargo/passenger compartment: - fixed, front right * Generator 180 A * Speed control system (cruise control) * Rear door (opening angle 270 degrees) * Wooden flooring in the cargo area * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Fuel tank: main tank 100 liters * Steering wheel (steering column mechanically adjustable) * Fog lights * Parameterizable special module * Crossmember with integrated step * Spare wheel in driving condition * Spare wheel holder under the end of the frame incl. jack * Low emission according to exhaust standard EEV * Rear crossmember, reinforced, with ball head * Seat cover / upholstery: artificial leather (cab) * Seats in the cab: double passenger seat * Seats in the cab: comfort suspension seat, driver side * Rear stabilizer * Reinforced front stabilizer * Reinforced front axle Standard equipment: Body/Structure: High-roof box van, wing doors at the rear, raised, and high roof, 3rd brake light, Adaptive brake light, Airbag driver side, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Display for washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the cab, Electronic stability program (ESP), Power windows electric 2-way, Gearbox 6-speed - TSG (Eco Gear), Glove compartment lockable, Child safety lock, Cargo area partition, Load securing/tie-down rings, Headlight range adjustment, Engine 2.1 L - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Smoker package, Low emission according to exhaust standard Euro 5, Sliding door cargo/passenger compartment right, Power steering, Seats in the cab: passenger seat with armrest, Seats in the cab: driver seat with armrest, Service interval

Condition: used, mileage: 51,550 km, power: 220 kW (299.12 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 11,154 kg, maximum load weight: 4,846 kg, overall weight: 16,000 kg, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 3,860 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cable winch, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, ClassicSpace, license plate Haus, swing seat, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), retarder, power take-off, automatic, differential lock, fog lights, work lights, revolving beacon, storage box, leaf suspension, underride protection, roof hatch, winch, green environmental badge Wheelbase: 3860 mm Body: Rosenbauer tank fire engine TLF with 3000l water tank, foam tank, built-in pump & winch, 6t front axle, rear axle hypoid 11t ring gear 390, differential lock front and rear axle, ABS, switchable ABS, drum brakes on front and rear axle, brake system rupture protection, condensate monitoring for compressed air system, rear axle stabilizer, programmable special module (PSM), classic cockpit, pollen filter, reversing warning device, automatic transmission 5/3.49-0.75 Allison 3000PR with retarder, daytime running lights, high performance engine brake, power take-off operation with range selection lock, power take-off NA CS40-b/1.7, high position, flange. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors! Rsdpfx Amovhi R Astscf - .

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Rjdpfx Amezhub Aetjcf Packaging and final inspection - Dalmec manipulator (2022)

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom Rsdpfjdz Er Rjx Amtocf and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rodpozqunhofx Amtocf Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, KEYENCE VHX-X1 Digital Microscope | Year of Manufacture 2025 | Like New | Manufacturer's Warranty For sale is a like-new KEYENCE VHX-X1 digital microscope complete system from the current generation of devices. The system was delivered and put into operation in December 2025 and is in excellent technical and optical condition. The manufacturer's warranty is still valid. The new price of the offered configuration is over €103,000 net. The system is suitable for quality assurance, failure analysis, material testing, research and development, reverse engineering, incoming goods inspections, and production-accompanying controls. The combination of high-resolution imaging, automated focusing, motorized XY stage, and integrated 3D profile measurement provides a complete system that is immediately ready for use. Rcedpfx Amjza Tpkstof Scope of delivery KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 computer unit VHX-7100 camera unit VH-Z00T objective lens High-performance objective lens VH-Z100 with a magnification range of 100x to 1000x Motorized precision stand VHX-S770E Large motorized XY specimen stage VHX-H6M software module for 3D profile measurements Ring light and illumination adapter OP-88164 Manufacturer's documentation Original accessories Special features Current KEYENCE VHX-X1 generation Year of manufacture 2025 Delivery and commissioning in December 2025 Very little use Manufacturer's warranty available Magnification range up to 1000x Motorized XY stage Motorized swivel head 3D profile measurement included Panorama and stitching function Immediately ready for use No additional investments required Typical applications Metallography Material testing Surface analysis Failure analysis Weld seam inspection Plastic analysis Electronics testing Quality control Research and development Condition Like new Fully functional Very little use Demonstration possible Inspection and functional demonstration by appointment. We will gladly provide further photos, serial numbers and technical information upon request. Availability: immediate Location: Ahrensburg near Hamburg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Rcedpfeztqxzox Amtsf Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 40 mm, spindle speed (max.): 8,000 rpm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Turning diameter: 40 mm Turning length: 50 mm Travel range X-axis: 180 mm Rcodozul Srspfx Amtef Travel range Z-axis: 200 mm Rapid traverse rate X/Z-axis: 15 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Fanuc 0i-TD Dimensions & Weight Footprint: approx. 1,500 × 700 × 1,600 mm Machine weight: approx. 1,500 kg

Condition: used, Year of construction: 2008, Material feed in any length (maximum stroke 610 mm) Cutting diameter: round 510 mm, square 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating manuals, wiring diagrams and spare parts lists available Only about 5,000 cutting hours Further technical data see photo or on request Machine weight: approx. 3 t Very good condition Rcsdpfovxqtaox Amtsf

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet. Redpfxszv Rhuj Amtscf

Condition: used, Year of construction: 2008, total length: 3,300 mm, total width: 1,800 mm, total height: 1,900 mm, overall weight: 6,000 kg, Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Rcjdey S Ni Sepfx Amtef Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Accessories Multifix tool holder package Various turning holders Measuring equipment / setting tools Steering ring Face plate Additional mountings and accessories Documentation available Typical dimensions (1,500 mm center distance version) Space requirement / dimensions approx.: Length: approx. 3,900 mm Width: approx. 2,000 mm Height: approx. 2,000 mm Turning length max.: 1,500 mm Turning diameter over bed: 570 mm Weight approx.: 6,000 kg Dimensions (LxWxH) approx.: 3300 x 1800 x 1900 mm Turning diameter via support: 340 mm Control: Heidenhain Manual Plus Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: Yes

Condition: good (used), Quick coupler system: Yes Technical condition: good Visual appearance: good Please contact Ferdinand Pater for more information Rsdpfx Aet Dlviemtecf

Year of construction: 2009, condition: ready for operation (used), Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical and cosmetic products, pastes made from pyrogenic silica, aluminium oxide pastes, plastisols, foam-free aqueous suspensions, casting resins. The machine has been used very little, with control cabinet, powder container, pressure load cells and operating manual. An on-site inspection is possible. Rcodozh Nhqspfx Amtsf

Condition: ready for operation (used), Year of construction: 2018, A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible. Rcsdpfx Asy N Dd Eomtof

Condition: ready for operation (used), Year of construction: 1998, A fully automatic rotary labeling machine Anker is available. Labels: body/chest/seal/diagonal strip/neck ring/back, nominal labeling capacity: 7000/h, rotary stations: 8, conveyor height range: 800mm-900mm, conveyor length: 3100mm, bottle types: Euro/NRW/Ale, volume: 330ml. Machine dimensions X/Y: approx. 3750mm/2750mm, operating hours: approx. 14500h. Some small parts and components were renewed in July 2024. Documentation available. An on-site inspection is possible. Rcsdjyhgnvopfx Amtef