Used Range Reduction for sale (16,965)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Dodpfx Acjz Ahxqspecn Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax Dcsdpfx Ajz Ahx Dscpsn EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort Dcsdey Au Alopfx Acpsn • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), functionality: fully functional, Mag Impact 2400 VSI (Vertical Shaft Impact) crusher Year of manufacture: 2008 Only 3,200 operating hours 250 kW electric motor Maximum feed material size: 130 mm Rotor tip speed: 50 m/s Output product: 0–16 mm (with max. 8/12 mm) Dcsdpfx Acoz H Rd Uopjn Capacity: 250–300 t/h (depending on material and target fraction) Includes support frame and complete electrical system BELT CONVEYORS NOT INCLUDED Includes two additional anvil rings, one of which is designed for double reinforced anvils Total assembly weight: 24,000 kg Crusher is 100% functional and ready for operation This VSI crusher offers the highest material reduction ratio for a 0–80 mm feed; the 0–4 mm fraction yield when processing limestone is nearly 50%! An ideal machine for producing fine aggregates (dust/powder) Full technical documentation and a certificate of origin are provided with the machine We also offer the widest range of spare parts in Poland for this type of machine (available in our other listings) as well as comprehensive post-warranty service!

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Dcjdez Dvfxspfx Acpon Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client. Viewing available. ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: Dcjdpfey Ty E Hjx Acpjn flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Reiter MAE 7-059 electrostatic airless spray systems with automatic spray nozzles. Item 4: Lifting Technology: MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure paint supply, insulated material supply, paint changeover, ring line, flushing agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- Key Technical Specifications: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- ----- Price of the above machine available upon request! ----- Price is ex-location. Dismantling, decommissioning, packaging, loading, and all transportation etc. are the sole responsibility of the customer and are not included in the sale or provided by the seller. Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable VAT.

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Dodpfx Ajzl Sbzjcpocn Automatic nozzle cleaning unit 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 – Ø105 mm SPINDLE BORE – 7.5 kW – 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum turning length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm Djdpfjyz Ubxex Acpscn • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mounting: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: Ø90 mm • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral Pitch threads: 0.88–160 DP • Whitworth threads: 7/16–80 TPI • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Coolant system • Chuck guard • Fixed splash guard • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for: • large shafts and cylindrical components, • tapers and stepped workpieces, • internal and external threading, • repair and maintenance work, • heavy workshop machining, • general industrial production. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions Dcsdpfx Asz I Srcscpsn • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: used, mileage: 56,500 km, power: 120 kW (163.15 HP), first registration: 12/2019, fuel type: diesel, next inspection (TÜV): 12/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, Special equipment: Storage compartment in the driver's cab roof liner, airbag on the passenger side, 13-pin trailer socket, ceiling light in the cargo area with door contact, entry handle on the rear pillar on the left, entry handle on the rear pillar on the right, tachograph operation at the front under the roof liner, chassis: stabilization level II, gearbox lock for auxiliary drive, cup holder at the front, grab handles on the A-pillars, additional main key, rear door (opening angle 270 degrees), connection strip for electrical connections (driver's seat box), fuel tank: main tank 93 liters, cargo area light LED, cable duct on the rear portal, cable duct on the side wall, multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, steering wheel with multi-function buttons, navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, parameterized special module, cross member with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under the frame end including jack, reversing warning system (acoustic warning signal outside), safety belt system with warning system (passenger side), seats in the driver's cab: double passenger seat, seats in the driver's cab: comfort suspension seat, driver's side, socket (12V connection) in the driver's cab, USB connection in the center under the dashboard (charging function only), fleece battery 92 Ah, jack, auxiliary heater (air) electric Additional equipment: Dcodpfx Acjzmpg Repon 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, anti-slip control (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, roof liner in the driver's cab, automatic activation for driving lights, entry handle for sliding door at the cargo area partition, electronic brake force distribution (EBV), digital tachograph, downloadable, body/superstructure: standard high-roof van, child safety lock, communication module (LTE) for digital services, cargo area partition, steering wheel (steering column mechanically adjustable), headlight range control, marker lights on the side, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI CAT, wheelbase 4325 mm, low emissions according to exhaust standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric, start/stop system, trailer stability assist (TSA), preparation for DAB radio reception, service interval display Assyst, heat protection glazing (windshield with band filter at the top), permissible total weight 5.00 t

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Equipment: documentation/manual, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Dcodpfx Asyr Ihljcpsn Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 (Spindle hours: 40746) Control: System TX 8 H Dcodjwtlz Tepfx Acpjn with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E optional 1 x rotating steady rest in tailstock 1 x ATC optics Complete documentation The machine can be inspected while running.

Condition: used, mileage: 171,798 km, power: 140 kW (190.35 HP), first registration: 04/2019, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, electronic stability program (ESP), tail-lift, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please feel free to contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. Transmission: Manual gearbox, 6 gears Driver Assistance Systems: MAN BrakeMatic * Brake assist * Cruise control * Lane Guard System (LGS) Lights and Visibility: Headlight range adjustment * Tinted glass Dcedez Ncb Repfx Acpon Audio & Communication: Radio: MAN Media Truck * AUX & USB connection Exterior: Air suspension * Trailer coupling, ball type: RINGFEDER 4040 G 145A * Low noise: Noise reduction measure 78 dB (92/97/EC) * Leveling system * Exterior mirrors, electric and heated * Rear differential lock * Speed limiter: Electronic speed limiter 90 km/h Safety: Electronic Stability Program (ESP) * Anti-Slip Regulation (ASR) * Anti-lock Braking System (ABS) * Curb mirror, electric and heated: right * Wide-angle mirror, heated Interior: Seats, fabric * Interior color: anthracite * Digital tachograph * On-board computer * Sun visor: foldable for driver and passenger * Aluminum trim: brushed Comfort: Air conditioning * Comfort seat for driver * Driver's seat, air-suspended * Co-driver's bench seat, 2 persons * Adjustable steering column * Electric windows, 2-way * Central locking * Voltage converter Additional Features: Front suspension, parabolic spring 3.4 t * Instrument panel, km/h 'High-Line, colored' * Rear axle, hypoid HY-0718 * HY axle ratio i 3.36 * Neutral position switch * 1-cylinder air compressor, 238 ccm * Engine brake * Flame-start system * Steering wheel lock * Compressed air tank, steel * Trailer socket for ABS at the end of the frame * 24V socket for trailer (15-pin) * Display in the cab for coolant and engine oil * Air dryer Tire sizes: 1st axle 215/75 R17.5 * 2nd axle: 2nd axle 215/75 R17.5, twin tires Other dimensions and weights: Payload: 2,031 kg * Permissible total weight: 7,490 kg * Fuel tank: 100 liters * AdBlue tank: 35 liters * Wheelbase: 4,200 mm The vehicle is located at our external storage facility; please contact us to arrange a viewing. Thank you very much! Subject to price changes, typing errors, and omissions. Intermediate sale reserved.

Condition: new, OptiProLam 360 Automatic Laminator with Digital Foiling The OptiProLam 360 is a fully automatic laminating and digital foiling system designed for today's commercial and digital print environments. Handling sheet sizes up to 360 x 570 mm, the OptiProLam 360 delivers exceptional lamination quality, premium digital foiling capabilities, and outstanding production efficiency in one compact finishing solution. With automatic suction feeding, pneumatic roller pressure and the ability to laminate both sides of the sheet in a single pass, the OptiProLam 360 is designed to increase productivity, reduce operator intervention and open up new opportunities for value-added print. Key Features Sheet size up to 360 x 570 mm Single-sided lamination Double-sided lamination in one pass Production speeds up to 9 metres per minute Automatic suction feeder Oil-filled heated chrome laminating roller 150 mm pile feeder capacity Automatic sheet registration with adjustable overlap Self-centring sheet guides Pneumatic roller pressure system Pneumatic burst separation with micro-perforation Touchscreen speed and temperature control Adjustable de-curling system Integrated digital foiling rewinder Advanced Lamination Performance The OptiProLam 360 features an oil-filled heated chrome laminating roller, designed to provide even and stable heat distribution across the full working width. Combined with adjustable pneumatic roller pressure, this helps deliver reliable laminate bonding and a smooth, professional finish across a wide range of digitally and lithographically printed materials. Benefits include: Oil-filled heated chrome roller for stable, even heat distribution Pneumatic roller pressure for consistent pressure across the sheet Reliable laminate bonding Smooth, professional finishing Consistent results across a wide range of printed media With production speeds of up to 9 metres per minute, the OptiProLam 360 combines professional lamination quality with the productivity required for busy digital print environments. Single & Double-Sided Lamination in One Pass Designed for maximum efficiency, the OptiProLam 360 offers both single-sided and double-sided lamination in a single pass. Unlike single-sided systems that require two passes for double-sided lamination, the OptiProLam 360 completes the process in one operation, dramatically improving workflow efficiency and reducing production time. Benefits include: 50% reduction in production time Increased productivity and throughput Reduced labour requirements Reduced operator handling Faster turnaround times Consistent, high-quality results on both sides of the sheet Whether producing brochures, book covers, presentation folders, menus, packaging, or premium marketing materials, the OptiProLam 360 enables more work to be completed in less time. Specifications Manufacturer Glendale Model OptiProLam 360 Condition New Stock Number 115002 Max sheet size 360mm x 570mm Min sheet size 150mm x 280mm Sheet feeder Yes, suction feed Feeder capacity 150mm Paper weights 80gsm - 350+gsm Speed Up to 9 metres per minute Single & double-sided lamination Yes Roller pressure Pneumatic Sheet separation Automatic, via pneumatic pressured roller Warm up time 5 minutes Digital foiling Yes, rewinder included Air compressor Included Power supply 220/240v 50/60Hz Machine weight 312kg Dimensions (L)1990mm x (D)750mm x (H)1420mm Dcsdoz H Sa Ropfx Acpen

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions Dcjdpfoytnznsx Acpjn The machine is brand new. 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: ready for operation (used), functionality: fully functional, The Seydelmann K504 vacuum cutter cooker combines chopping, mixing, emulsifying, and cooking in a 500-liter tank. It is particularly suitable for manufacturers of processed meats, ready meals, meat products, fish, and plant-based alternatives. In this way, a single machine can perform multiple processing steps while minimizing product transfers. The K504 processes both fresh and pre-cut, frozen or cooked meat equally well. Furthermore, Seydelmann also provides for its use with fish, vegetables, plant proteins, fruits, and other food preparations. Its operating range extends from -12°C to +85°C. Vacuum chopping and emulsifying The vacuum function removes air during the chopping process. Consequently, it enables a finer and more compact emulsion to be obtained. Seydelmann indicates a volume reduction related to air of between 5 and 7%. Moreover, vacuum processing promotes protein extraction as well as the binding of water and fats. This technology particularly meets the needs of the industrial processed meat industry. It is suitable, for example, for cooked sausages, dry sausages, meat emulsions, and preparations that require a uniform texture. The K504 is also recognized on the market as an industrial vacuum cutter and 500-liter cooker. Cooking and chopping in a single machine The cooking system heats the tank with hot steam injected underneath it. As a result, the product can be chopped and heated during the same process. This combination reduces production steps and can therefore shorten the processing time. The Seydelmann K504 is therefore suitable for recipes that require fine grinding, thorough mixing, and controlled temperature increase. Furthermore, the large tank capacity meets the needs of industrial batch production. Control and integration into production The Auto-Command 1000 system features a 21.5-inch color screen. It allows you to monitor technical parameters and store 30 programs, each including up to 10 steps. In this way, the operator can more easily reproduce the settings for different recipes. Finally, the cutter can be equipped with loading and unloading equipment to facilitate product handling. Its construction, which is almost entirely made of stainless steel, also simplifies cleaning. The Seydelmann K504 is therefore a complete solution for industrial companies looking for a large-capacity vacuum cutter cooker. Technical specifications Manufacturer: Seydelmann Model: K504 Tank capacity: 500 L Operating range: -12°C to +85°C Motor power: 140 to 200 kW depending on the version The advantages 500-liter industrial tank Chopping, mixing, and emulsifying Vacuum processing Integrated cooking Processing of fresh, frozen, or cooked products Dcedszzzyrepfx Acpen Adaptation to meat and plant-based recipes Up to 30 production programs Reduced transfers between multiple machines Stainless steel construction

Condition: used, Year of construction: 2018, High-performance, fully automatic combination folding machine (AFC-744S) from the quality Japanese manufacturer Horizon International, Inc., bundled with the high-volume PFU-74D pallet feeder. The system is in excellent technical condition and is ideally suited for print shops and post-press facilities requiring maximum precision in B1 format with minimal setup times. Djdpfx Ajz Az D Tscpscn Technical specifications of the main components: 1. Horizon AFC-744S Folding Machine (Cross Folder) - Sheet size range: Max. 738 x 1,100 mm (B1 format) | Min. 210 x 297 mm - Paper weights: 35 – 220 gsm - Max. production speed: Up to 40,000 cycles/hour (or 230 m/min belt speed) - Power requirements: 380/400/415V AC, 3-phase (f), 50/60 Hz, 2.8 A 2. Horizon PFU-74D Pallet Feeder - Model: PFU-74D (Pallet Pile Feeder) - Function: Automated sheet feeding directly from the pallet for non-stop production and maximum efficiency in large-format processing. - Benefit: Drastic reduction in physical strain on the operator and minimized downtime during stack changes. Highlights & Features: - Intelligent automation (Touch & Work): Fully automatic adjustment of fold plates and sheet guides via the central, intuitive color touchscreen display. No specialized technical expertise required for setup. - High flexibility: Rapid changeovers and recall of pre-programmed standard fold patterns, plus available memory slots for custom repeat jobs. - Outstanding folding quality: Precisely guided combinations of knife and buckle folding for flawless results, even with challenging paper stocks. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, but the optics and measuring electronics are functional. Extensive VDI accessory package included: The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): 1x VDI 30 holder 2x VDI 20 holder (in two different heights) 1x VDI 16 holder Dcodpfx Aszy Uqhscpjn Technical data: Measuring range X-axis (longitudinal travel): 250 mm Measuring range Z-axis (vertical travel): 310 mm Base spindle mount: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test report or printed manual is no longer available. The machine is sold in its current condition, as viewed (uncleaned). An on-site inspection while the machine is powered on is highly recommended. Sales conditions: Price: €1,850 (negotiable, plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: good (used), Year of construction: 2011, Koenig Eco Twin bun line - Model 9000/800 - Used - Year of manufacture: 2011 Dodpfx Acezzk Dtopjcn - Rex Classic divider - 6-row divider with reduction to 5 and 4 rows - Side conveyor belt for collecting the dough pieces - Computer control - 3 heads - Weight range: 30-100 g - Maximum output: 9,000 pieces/hour - Good technical condition - Collection from warehouse / transport option available - Price on request

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. Dcjdpfx Aexlif Recpjn This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Dsdoxv Af Sopfx Acpecn Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 620 mm, turning length: 1,500 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 15 W, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 3,325 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,915 kg, Equipment: documentation/manual, rotational speed infinitely variable, Tonio CNC Pinacho ST310 110x1500 with Fagor 8055T, featuring automatic learning capabilities. a. Fagor 8055T control unit Dedsz Hc Daopfx Acpecn b. Distance between centers: 1500 mm c. Center height: 1500 mm d. Maximum turning diameter over the bed: 620 mm e. Spindle bore: 105 mm f. Speed range: 0-2500 rpm g. Motor power: 15 kW h. Dimensions: 3325x1350x1850 mm, weight: 2915 kg Machine complete with: Electronic handwheel for X-Y axes; Servo motor for the main axis; Safety guards compliant with CE standards; Chip collection tray; Complete cooling system including tank and pump; Centralized and automatic lubrication for the guides; Work area lighting; Leveling supports; Reduction bushing for spindle and tailstock; Complete fairing compliant with CE standards. - Excluding transportation - Net price: €41,500.00 + VAT (excluding VAT and transportation)

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Dcodpsxhgawjfx Acpsn Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. Dcedpfx Acew U Taxopjn ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: new, SHIMADZU Moisture Analyzer MOC-120H, 120 g Dodpszvp Aqsfx Acpocn A high-precision instrument for determining the moisture content in plastic granules. Thanks to its user-friendly software and the ability to efficiently carry out drying processes, the MOC-120H stands out from other moisture analyzers on the market. Comparable to the KERN DBS 60-3 moisture analyzer. The MOC-120H moisture analyzer offers a variety of functions and technical specifications: • Scale type: Moisture analyzer • Weighing range: Maximum 120 g • Readability: 0.001 g • Measuring principle: Measurement of weight reduction through drying • Size of weighing pan: Ø 130 mm • Measuring range of moisture content: 0.01 % to 100.00 % • Reading accuracy of moisture content: 0.01 % • Measuring methods: Automatic or time-controlled drying period, quick, step, or soft drying mode, "prediction" mode • Heating source: Infrared quartz radiator • Temperature range: 30 - 180°C, in 1°C steps • Housing dimensions (W x D x H): 220 x 415 x 190 mm • Weight: 4.5 kg Application examples The MOC-120H is versatile and suitable for a wide range of applications: • Food industry: Determination of moisture content in foods such as cereals, flour, meat, and dairy products. • Pharmaceutical industry: Analysis of powders, tablets, and other pharmaceutical products. • Chemical industry: Examination of chemicals and raw materials. • Environmental analysis: Determination of moisture content in soil samples and other environmental samples. Conclusion The SHIMADZU Moisture Analyzer MOC-120H, 120 g, is a high-precision and versatile instrument that is ideal for determining the moisture content in a wide variety of materials. With its extensive functions, high precision, and user-friendliness, it is an excellent choice for laboratories and production facilities that rely on accurate moisture measurements.