Used Rapid Dgs for sale (70)

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver Ndedpfxsi I Hc As Akqoc -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm Nedpfx Aex N R H Tjkqodc - Blade speed 2800 rpm - Weight approx. 1500 kg

Year of construction: 1996, condition: good (used), functionality: fully functional, Manufacturer: Rapid Model: 1521-L Year of manufacture: 1996 Ndjdpjvndpaofx Akqec PRICE REDUCED FROM 1100 TO 950 EUR!!!

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Ndedpfx Asz Eh Nrjkqec Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Year of construction: 2016, condition: as good as new (ex-display), 3x piece docking mills Rapid Type: G15042 Docking Ndodpslwqtbofx Akqsc G15035 Docking Year 2016 ,2010, 2009

Condition: used, Year of construction: 2007, machine/vehicle number: 1624, Description Type: Glazing bead saw for PVC window profiles Year of manufacture: 2007 Motor power: 2 × 0.45 kW Saw blades: 2 × 200 mm diameter Feed: Pneumatic Profile clamping: Pneumatic Application area: Precise cutting of glazing beads for window frames Ndodpfx Asxxz A Uekqec

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Njdjyzmw Eepfx Akqsdc

Year of construction: 2017, condition: used, Pneumatic material feed Travel length: 800 mm (multi-stroke possible, max. 2,400 mm) Max. saw blade diameter: 500 mm Cuts between 45° and 90° possible Ndodpekrgiujfx Akqjc Saw blade RPM: 2850 revolutions per minute. Continuously adjustable saw feed Minimum quantity spray device Piece counter with shut-off automatic Weight: 600 kg

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Ndsdszln D Eopfx Akqoc Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: used, Year of construction: 1988, Panel saw Manufacturer: Rapid Nsdozuynbopfx Akqjdc Model: PK 100 Year of manufacture: 1988 Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Ndodpfx Akozp Slzeqsc Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile Njdpfezn Iqksx Akqjdc -Type: 1528 -Drive motor: 2.2 kW -Funnel opening: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 1992, condition: good (used), functionality: fully functional, Manufacturer: Rapid Njdpfx Akjyyp Uqjqjdc Type: 1415 Grinding chamber dimensions: 150 x 140 mm Power: 1.5 kW New knives

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Nodpfxezlnxio Akqjdc Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Condition: ready for operation (used), functionality: fully functional, RAPID Machinery Generation III automatic hot foil stamping machine, designed for industrial printing and packaging applications. The machine features two heated stamping heads, digital temperature control and continuously adjustable speed. Heavy-duty construction ensures stable and reliable production. Technical Specifications: • Manufacturer: RAPID Machinery Co. (Sydney, Australia) Ndodpfxoyghr He Akqsc • Machine type: Automatic hot foil stamping machine • Series: Generation III • Number of stamping heads: 2 heads • Head positioning: adjustable left / right • Maximum stamping width: approx. 300–350 mm • Maximum material thickness: approx. 0.1 – 1.5 mm • Processable materials: paper, cardboard, plastic substrates • Temperature range: approx. 80 – 200 °C • Temperature control: independent digital control per head • Operating speed: continuously adjustable • Operating modes: automatic / single pull • Counter system: digital batch counter • Drive system: electric • Power supply: 3-phase, 400 V, 50 Hz (typ.) • Safety equipment: emergency stop, CE-compliant safety system • Frame construction: heavy-duty industrial steel frame • Country of manufacture: Australia

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Nodpfx Aeu Nigwjkqsdc *

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Ndjdjyxy S Dspfx Akqoc Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Affordable machine – ideal for export

Year of construction: 1999, condition: used, Rapaid mill Type: 1528 - L Year of manufacture: 1999 Ndsdpfxjxrv S Re Akqec

Condition: used, Year of construction: 2016, weight max. in kg 1000 kg fork length 1150 mm stroke height 800 mm weight of the machine ca. 145 kg Electric scissor lift pallet truck from Rapid Nodpfx Aksu S R Dmoqedc Type: REE.1000 Year of manufacture: 2016 Condition: used, in working order Note: without charging station and without battery!

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Ndodsyr Tmmjpfx Akqoc Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Equipment / Additional information: With heating Also very interesting for the textile industry Njdevf Iubepfx Akqodc

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Rotor width: 450 mm Njdpfx Ajyr Trpekqsdc Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Nsdpfsyr Tygjx Akqsdc Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Ndjdpfx Akoyr Ty Tsqjc Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Nsdpfeyr Tn Djx Akqsdc Drive motor: 18.5 kW