Cutting mills

Rapid 45/35

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Gbedpfx Aoyr Tn Del Uju Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE Gbsdjxxirwopfx Al Uju

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Gbedsua Tbwepfx Al Uou SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2009, operating hours: 10,720 h, functionality: fully functional, Willibald EP 5500 Shark in excellent condition and ready for work. Gjdpfey Iwgkex Al Uebu

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: Gbedpfxstqfhxo Al Ueu When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Year of construction: 2008, Support axle cat. 3 Support wheel and transport wheel 26x12 Model EG 100/300/77RH / Hydraulic cutting width adjustment Strip body no. 30 Maize inserter / Straw insertion plates Disc coulter Overload protection with additional spring leaves / Gedpfx Astia Dbsl Uobu

Condition: new, Year of construction: 2026, ECS500 / ECS500 E Debarking and Trimming Machine Godpfx Alsr D Nk No Uebu • Weight: 150 kg / 250 kg • Drive: Hub drive PTO / Electric three-phase motor 5.5 kW • Dimensions (L x W x H): 100 cm x 90 cm x 155 cm • 3-point tractor attachment • Blade disc diameter 500 mm • Blades are resharpenable and replaceable Price: €5,400 / €6,700

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW Gbjdpfezp Slzox Al Ueu

Year of construction: 1989, condition: excellent (used), functionality: fully functional, Manufacturer: RAPID Model: GK 4535-KU Rotor / grinding chamber dimensions: 450 x 350 mm Gedexz D R Tjpfx Al Ujbu Number of rotor knives: 3 Number of stator knives: 2 Drive motor power: 18.5 kW Technical condition: very good!!! Equipment: plastic discharge + silo

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades with suction HS-40/SL-SP Specifications Gbedpfx Aozwwdxel Ueu Manufacturer TRIA Model BM 50-30 Year 2005 Condition Used Stock Number AI2182