Kvarn

Zerma GSL 180/300

Condition: new, Year of construction: 2025, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Ltjdpfot Aam Hjx Agzoa Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: reconditioned (used), functionality: fully functional, No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Ledpjtvfhcsfx Agzeta Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Ljdpjcqvhwjfx Agzsta - available immediately -

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Ljdpfx Agoghgbhozsta The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm Lodpfx Agora N A Nszjta rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control Lsdew Iqhmepfx Agzeta • Control cabinet integrated into machine frame • Separate operating panel with control interface • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Ltsdeimz Uaopfx Agzja Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Ltodpfxeghgfte Agzja ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures Ledoftm Hrspfx Agzsta - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: repair required (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 02093098, type of input current: three-phase, power: 190 kW (258.33 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 1,900 kg, type of cooling: air, nominal power (apparent): 237 kVA, input frequency: 50 Hz, operating pressure: 16 bar, Equipment: documentation/manual, With soundproof hood including control cabinet (display is dismantled and located in the control cabinet) The generator is included in the price General overhaul of the CHP system in 2022 Regular maintenance/inspection until September 2023 Non-functional CHP system -> we were informed that only the turbo is defective. The system has been shut down for a year (an on-site functional test is not possible). The system has not been dismantled. Disassembly and removal are the responsibility (costs, execution) of the buyer. (Inspection is possible). Ltsdpeq R Ri Aefx Agzea We cannot provide any guarantees, and the warranty is excluded to the extent permitted by law. Collection/disassembly is possible Monday to Thursday from 7:30 a.m. to 4:00 p.m. and Friday between 7:30 a.m. and 1:00 p.m.