Used Recoiler Decoiler for sale (326)

Condition: good (used), Year of construction: 1985, Decoiler for unwinding rolls of sheet, e.g. zinc. Brand: Kader BV Type: Geska 4 Year of construction: 1985 Engine: 0.25 kW Todpfjqctq Esx Aqxea Mains voltage: 380 V Rear roller diameter: ± 450 mm Machine is in very clean condition.

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, inside dia. 430 - 530 mm, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Todjyci Smopfx Aqxea

Condition: good (used), Year of construction: 2019, functionality: fully functional, EMAE-85/600 Servo feeding and straightening line with LARA D-3000/1600-MH decoiler: Hydraulic coil loading table for Lara D-3000/1600MH decoiler Max. width: 600mm Max-Min thickness: 0.8 – 4mm Tedpfovmmucex Aqxsa Positioning accuracy: +/-0.05mm Max. Diameter: 1600mm Max. Weight: 3000kg Connection to press CamPositioner_HBPS DieTronic coil lubricator width 500 mm Renewed safety logic and mesh fences 8/2020 CE approved

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Tsdpfx Astgvgpoqxea Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram Tedjpvlf Sepfx Aqxea - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Tsdpfxeh T Duce Aqxea Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Tjdsdhzf Ijpfx Aqxoa Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Year of construction: 1994, condition: used, Material width: 20-80 mm Material thickness: 0,3-1,5 mm Speed: 0-40 meter/min. working direction left-right Todpfx Aodc Ez Hoqxja Rolls: 20 pcs., diameter 30 mm Decoiler capacity: 300 kg pneumatic break

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011 Tedpfxow U Rzts Aqxja

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011 Tjdpfow U R Adsx Aqxja

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Tsdpjrnq T Njfx Aqxoa reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t Tedpfjxayy Ijx Aqxsa coil OD: max. 1.600 mm

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm Tjdpjxayynsfx Aqxoa reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² Tsdpfsrnq Ufex Aqxja coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW Tedpfx Aspflptjqxea weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Bandwidth: 300 m Spool weight: 400kg Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Condition: used, sheet width 250 mm Tjdpfefn Aqmox Aqxja coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW Tedpfxsymp Rds Aqxoa weight of the machine ca. 2 t

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Todpfsipx Ufjx Aqxja Spreading mandrel length: 1500 mm Several units available Frequency inverter control Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm Todpfxjv I Ur Eo Aqxsa - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes Tjdpfx Aqsxd Rgaexja - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 Tjdpexd Rgmefx Aqxea - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band console decoiler 500 mm - Loading capacity 1.500 kg - Inner φ 480-530 mm Tjdpfxefvbxqe Aqxea - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 500 mm

Condition: new, Year of construction: 2025, Singel band decoiler OD-L 1250/1: - 5 arms, Roller bearings, with disc - Loading capacity: 1.000 kg Todpfx Aqjtt Iqzjxea - Working width: 1.250mm - Inner diameter 280-520mm - Delivery time: 10 days

Condition: new, Year of construction: 2025, Single band console decoiler (1000 mm - up to 1,0 t stationary - Inner φ480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Tjdpfxjfvbv Se Aqxea - max coil width: 1.000 mm

Condition: new, Year of construction: 2025, Single band console decoiler 1000 mm with wheels - Loading capacity 1.000 kg - Inner φ 480-530 mm Tsdpfx Ajfvbwzjqxea - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.000 mm