Used Reel for sale (861)

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll - year of manufacture: 2008 - labelling applicators: 2 (wet-glue heads) - operation Direction: Right-machine, parallel on one side of the machine - production Capacity: 45.000/h Pgsdpfjyhgqqex Ab Teu - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Psdpfsyhgwdjx Ab Tsgu

Condition: used, Year of construction: 2022, KOMEX M13 500 Thermal Weed Removal Device Demonstration unit with 100 operating hours Compact and flexible KOMEX M13 500 – the compact and flexible thermal weed removal device. With forklift-compatible entry slots and its slim design, the unit offers countless applications for weed control, gum removal, and gentle cleaning. The mobile and easy-to-transport build is perfectly suited for any pick-up cargo bed or flatbed vehicle. Suitable for all carrier vehicles with cargo surfaces: • Pick-up trucks • Electric vehicles • Municipal vehicles Podpfxoyhtp Ho Ab Tegu • Tractors, forklifts, and more Standard equipment: - Hot water steam generator, 12 Volt, 13 l/min, digital - Forklift frame 1.30 x 0.96 m for KOMEX-M13-500 - Water tank 250 L, upright, Traffic Grey RAL 7042, front - Water tank 250 L, upright, Traffic Grey RAL 7042, rear - Battery compartment with cover for KSRA - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion guard - Kit: battery compartment, 260Ah battery, charger, 80A securing plate - 2-piece hand lance set, KHL-P (gun) with KHL-D (nozzles), KHL-Z cylinder lance and quick coupling - Dimensions (L x W x H): 131 x 96 x 122 cm - Unladen weight approx. 420 kg Optional equipment: - Mounting bracket incl. pin and chain, coated in RAL 6018 GREEN - Walk-behind area device - 4-position lance holder, straight, 2.0 - Brass brush lance D8 cm, brass brush lance D8 cm with handle Location: Anton Hülsken

Condition: new, Year of construction: 2022, Keckex KOMEX M13 FLEX Thermal Weed Removal Device Rental return at a special price Flexible and mobile The KOMEX M13 FLEX is the smallest yet most versatile thermal weed removal device. With various options, you can configure your custom unit for weed removal, gum removal, and gentle cleaning applications. Modular, self-contained, and highly effective in all use cases. Optional sub-frames: trolley, 3-point hitch, and more. Ideal for cleaning and wild weed control. Water tank: without / with self-priming pump. Compatible with all carrier vehicles with water tank, trailers with water tank, vehicles with 3-point hitch and water tank. Standard equipment: - Hot water steam generator 12 Volt, 9 l/min, LP1002, analog - Multi-frame 0.9m galvanized - Battery compartment with cover - Set: AGM battery 12V, 240Ah with charger 25A, 2x SB 50 grey connectors - 15 m hot water hose with protective sleeve and abrasion guard - 2-piece spray lance set, gun with nozzles, cylinder lance, and quick coupling - L x W x H: 90 x 70 x 100 cm - Unladen weight approx. 240 kg Special equipment: - Automatic hose reel, stainless steel for 15 m - Holder for machine protection - Machine protection - 3kg descaler - 4-position lance holder, straight, 2.0 - 3-point hitch Cat. 1-2 for multi-frame Location: n/a Pgsdpfx Aeyhtp Teb Tju

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 32 [mm] - maxi feed length : 178 [mm] - maxi turning length : 63.5 [mm] - number of spindles : 8 - number of cross slides : 8 - electromagnetic clutch - number of spindle speeds : 26 - spindle speed : 199-2737 [rpm] - independent feeds normal strokes : 73 [mm] - dimensions : 6632 x 1357 [mm] - weight : 7950 [kg] Podpfjyh Rm Hsx Ab Tjgu EQUIPMENT - Saco hydraulic pick up station 7 - Stock reel and stand - Magnetic swarf conveyor - Fume extractor - Part catcher - End of bar catcher - Part conveyor belt - High pressure pump - Part off toolholder station 7 - Drill holder station 8 - Bracket toolholder for center bloc station 1 - Bracket toilholder and drill holder station 1 - CNC cross slide RTECH position 5 : 2 axis with CNC FANUC Oi-TD command - Barloader IEMCA PRA40/42F

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Pgodpfx Abeyb Sa Ds Teu Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: used, Year of construction: 2018, Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  - year of manufacture: 2018 - Capacity: approx. 20,000 /h - Bottle Formats: 0.5 L, 1.5 L PET  - Worked Labels: IN REEL - Reel Change: Automated - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC - Protection Class: IP 54 (main panel and motors) - Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) - Versatility: Capable of handling a wide range of container shapes and sizes (glass, PET, cans). Scope of Delivery  - Krones ERGOMODUL labeling machine (2018) - CE certification, operating and maintenance manuals, wiring diagrams - Spare parts and format change components Pgodpfxeyb Smdj Ab Tou - Drying System | KRONES-LINADRY | 2003 - Labelcheck | KRONES | Checkmat

Condition: used, mileage: 68,000 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,450 mm, loading space volume: 14 m³, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Reference Number: #210 MAN TGS 28.510 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with powerful Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and jetting operations, combining high suction power, effective water recycling, and robust high-pressure technology in a durable, user-oriented configuration. With a 14,000 L tank capacity, 3,000 m³/h vacuum power, large-diameter DN150 suction line, and a high-performance Uraca high-pressure system, this recycler is ideally equipped for demanding municipal and industrial applications. Extensive operating, comfort, and safety features enable efficient workflows even during long periods of use. Body: * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000-liter tank capacity * 1,000-liter fresh water * 5,000-liter jetting water * 8,000-liter sludge compartment * Discharge by tilting tank up to 45° Vacuum System: * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h * Galvanised DN150 pipework * Approx. 20 m suction hose DN150 High Pressure System: * Uraca P3-45 65 413 liters/min at 175 bar * Approx. 160 m HP hose DN32 * Hydraulic jetting hose reel with approx. 80 m DN13 Additional Fresh Water Unit: * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring rewind hose reel with 15m pressure hose DN10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Suction and HP booms * 5-liter heated hand wash * Stainless steel toolbox * Operator control cabinet with display * Engine start controllable from cabinet * NMV start controllable from cabinet * Radio remote control with display * Equipment cabinet with two doors – both sides accessible * Hose storage rack * Extended soundproofing for pump compartment * LED work lights * Central lubrication system Technical Data: * Unladen weight: 18,385 kg * GVW: 26,000 kg * Length: 10,100 mm * Height: 3,450 mm * Width: 2,550 mm Chassis: * MAN * TGS 28.510 * 6x2 * 375 kW / 510 HP * EURO 6 Pgsdpfsydhh Njx Ab Tsu * Automatic transmission * Air conditioning * Self-propelled working machine — sewer cleaner Conclusion: An extremely powerful MAN TGS 28.510 6x2 equipped with Wiedemann Super 2000 water recycling body, advanced vacuum and high-pressure technology, and thoughtfully designed operator and comfort features. The ideal solution for professional sewer cleaning companies who place value on efficiency, performance reserves, and rugged technology. For further details and/or pictures, please contact us directly. A wide range of additional vehicles for SALE or RENT can also be found at: Changes, prior sale and errors excepted. The purchaser is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and excludes any warranty.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hand winch Features: Net: €5,000.00 / Gross: €5,950.00 Article number: KET118331600.01 Technical data: • Brand: Stedele • Model: KET 18 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 163 x 0 cm • External dimensions (L x W x H): 325 x 220 x 171 cm • Loading height of the floor: 0 cm • Permissible total weight: 1,800 kg • Unladen weight: 430 kg • Payload: 1,370 kg • Chassis: Low-loader (wheels beside the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels up to a diameter of 1600 mm and a width of 1300 mm. • Standard tube holder approx. 60 mm • Torsion-resistant chassis with a solid receiving frame, hot-dip galvanized • Easy operation of the receiving frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free storage and securing of the reel by fixation • Solid support wheel holder and rear support • Stable telescopic crank supports at the rear • Incl. Robust and maintenance-free hand winch, pulling force approx. 2,300 kg • Very stable steel frame, welded • Frame completely hot-dip galvanized • Robust aluminum tread plate fenders, walkable • Reversing automatic system • ALKO overrunning device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Foldable license plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT Psdpfjzy Agksx Ab Tegu - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Manual winch Features: Net: €5,037.82 / Gross: €5,995.00 Article number: BKT227281600.01 Technical data: • Brand: Blyss • Model: KTT 27 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 0 cm • External dimensions (LxWxH): 470 x 234 x 218 cm Pedpfszy Axyox Ab Tjgu • Loading height of the floor: 0 cm • Permissible total weight: 2,700 kg • Unladen weight: 711 kg • Payload: 1,989 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels up to a diameter of 2800 mm and a width of 1600 mm. • Standard tube holder approx. xx mm • Torsion-resistant chassis with a massive holder frame, hot-dip galvanized • Easy operation of the holder frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free mounting and securing of the reel by fixing • Massive support wheel holder and rear support • Stable telescopic crank supports at the front and rear • Incl. Robust and maintenance-free manual winch • Very stable steel frame welded • Frame completely hot-dip galvanized • Plastic mudguards • Reverse automatic • KNOTT drawbar and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • License plate holder 340x200mm _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Pedpfx Ajzymyneb Tsgu Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2026, Laser Handheld Welding Machine – Welding – Cutting – Cleaning Compact, Flexible, Easy to Use • 2kW unit for welding up to 6mm steel, 5mm stainless steel, 4mm aluminum. • All our welding units feature water cooling • Industrial-grade machines for continuous operation. • Dual-wire feeder for use with up to 2 x 15 kg flux-cored wire reels, which can be operated simultaneously or individually. When both wire reels are activated, double the amount of wire is fed, allowing for the welding of very large seams. • Includes laser safety glasses, replacement nozzles, and protective lenses -TECHNICAL DATA -Model: Revobotics 2KW LASER -Torch package length: 10m -Laser power: 2000W -Total weight: 160kg -Safety: Contact clamp -Wire feeder: Ø0.8, 1.0, 1.2, 1.6, 2.0, 2.5mm (dual-wire version) -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm Pgsdpezzktnofx Ab Tju -Power supply: 32A CEE -Dimensions (L x W x H): 1000mm x 410mm x 710mm -Water cooling: Yes

Condition: used, mileage: 169,204 km, power: 300 kW (407.89 HP), first registration: 09/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Municipal vehicle * Sun visor * ABS * ASR * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Differential lock, rear axle * Rotating beacon, orange * Exhaust behind the cab * Air dryer * On-board computer * Central locking * Driver's comfort seat * Seat heating * Rear view camera * Hill start assist * Driver airbag * Fog lights * Sunroof * Steering axle * Radio Pgjdpfjzywrnox Ab Tsu * Auxiliary heater * 3rd seat * Central lubrication system * Turning assistant, right * 12-speed * Suspension: leaf spring/air * Payload: 7930 * Continuous brake: engine brake ----Superstructure: Kroll suction-pressure tank superstructure, type K 1.2/10.8/28 P-Can (year 2012). Capacity: 10,800 liters, auxiliary tipping mechanism, pneumatic extension cylinder as an adjustable partition with 3 locking levels, hydraulic tailgate, suction hose cassette with telescopic arm (180° swivel), large HD hose reel for 240 m of HD hose DN 25, small hydraulic HD hose reel at the rear right for 60 m of HD hose DN 13, Hetronic remote control + floor control. Uraca high-pressure pump P3-45, max. 348 liters/min, 205 bar (1,442 operating hours), CVS vacuum pump VacuStar-WR 3100 L, flow rate max. 2,469 m³/h (1,422 operating hours), total operating hours of superstructure: 4,381 operating hours, hose length meter.----Weight variant 28 tons For sale only to commercial customers. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: excellent (used), mileage: 89,465 km, power: 346 kW (470.43 HP), first registration: 01/2021, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, color: other, driver cabin: day cab, emission class: euro6, number of seats: 2, total length: 9,340 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2021, Equipment: ABS, tire pressure monitoring, = Additional options and accessories = - Power take-off (PTO) - Steering wheel audio controls = Remarks = Drivetrain PTO: 2292 uur Superstructure Construction year: 2021 2021 MAN TGS 28/470 in absolute top condition with only 89,000 km. This one is configured as a sewer cleaner and has the following specification: Brand: Kroll Type: Combination gully cleaner Pgjdpfxjzyy Ews Ab Teu Model:K14.0/28p Total capacity: 14,000 liters Adjustable partition with 3 positions Water tank position, Sludge tank: 1. 3300 liters, L10600, 2. 5300L 8600, 3. 7300, 6600L Large high-pressure hose reel behind 180m DN 25 HD hose Small high-pressure hose reel behind 60m DN 13 HD hose Suction hose storage cassette with 180-degree telescopic arm High-pressure water gun Sound-insulating panels left and right Remote control High-pressure water pump Brand: Uraca Model: KD718 Capacity 315 liters per minute at 170 bar Vacuum pump Brand: CVS Model: Vacustart 1600 Capacity: 1600 m³ per hour Dutch machine in top condition! = More information = General information Number of doors: 2 Registration number: 17-BRF-9 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 17.553 kg Carrying capacity: 10.547 kg GVW: 28.000 kg Functional Make of bodywork: Kroll K14.0/28P Water tank: Yes Maintenance APK (MOT): tested until 04/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, functionality: fully functional, machine/vehicle number: 33098, mileage: 59,900 km, power: 315 kW (428.28 HP), first registration: 08/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 Pgsdjz Haruspfx Ab Tou M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort air-suspended seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Extension cylinder, total volume 15 m³, usable volume consisting of approximately 1 m³ fresh water tank and approximately 12 m³ sludge tank, tank wall thickness 6 mm, tank emptying by pushing using the extension cylinder, free discharge or by pressing with the vacuum pump, bottom flap to be opened hydraulically upwards over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, sludge tank level indicator with float and external scale (graduation every 500 L), sight glass for water tank, discharge apron made of stainless steel, vacuum pump CVS RSW 1600 R (1600 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (approx. 80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approx. 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, radio remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven, galvanized with approx. 40 m suction hose in DN 80, speed for unwinding/winding up can be adjusted steplessly, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics

Condition: used, functionality: fully functional, machine/vehicle number: 33099, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 16 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort suspension seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio with touch screen, Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection system, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacons on cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 16 m³ (sludge chamber approx. 15 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with a maintenance opening, hydraulically upward-opening full-size cover with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with graduations every 500 l and internal float, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, discharge apron made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the operating station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small, hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED roof beacon at the rear, reversing camera Pgodpez Hatxjfx Ab Tsu

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Pgjdpfx Aoz Ha Ivjb Teu Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, functionality: fully functional, machine/vehicle number: 33530, mileage: 239,900 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Chassis designed for a 28-ton weight variant, OM471 engine, transmission oil cooler, disc brakes, Active Brake Assist, High Performance Engine Brake, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 tons, 3-leaf springs, air-suspended rear axle, rear axle 13 tons with differential lock, steerable and liftable 9-ton trailing axle, regulated water pump, transmission lock for auxiliary drive, daytime running lights, light sensor, trailer coupling Ringfeder (D40), tires: front and rear axles 385/65R22.5, middle axle 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,200/2,550/3,650; Pgjdpfx Absz Hbr No Tju M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, navigation system, tinted windshield, sunroof, heated and electrically adjustable mirrors, electric windows, comfort central locking system, driver's comfort suspension seat, passenger's comfort suspension seat, multifunction steering wheel, reversing warning system combined with hazard lights, digital tachograph VDO, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-equipment for toll collection, air conditioning, refrigerator, cruise control, attention assist, traffic sign assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof-mounted rotating beacons, sun visor. Total volume 15.5 m³, usable volume consisting of an 800-liter fresh water tank and a 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free discharge or by pressing with the vacuum pump, floor flap over the entire cross-section to be opened upwards hydraulically, mechanical swivel locks, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, sludge tank level indicator with float and external scale (division of 500 L), sight glass for water tank, discharge skirt made of stainless steel, vacuum pump GardnerDenver RFW 200 DVL (1250 m³/h) with 685 operating hours, hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) with 681 operating hours, hydraulically driven, stepless pressure regulation, small manual HD hose reel with approx. 40 m HD hose DN13 and spray gun (with swivel joint), 5x LED work lights (one at the rear and two on the right and left), LED rotating beacon at the rear of the superstructure, suction hose boxes on the right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/balancing/discharge, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, trailer suction line, trailer hydraulics.

Condition: used, functionality: fully functional, machine/vehicle number: 34163, mileage: 19,900 km, power: 315 kW (428.28 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Psdpfxoz Hcppj Ab Togu Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling with ring spring (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with remote control, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery master switch, pre-equipment for toll collection, pre-equipment for alcohol tester with immobilizer, air conditioning, cruise control, speed limiter, residual heat utilization, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 14.5 m³ (sludge chamber approx. 13.5 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with inspection opening, 2-way piston lock: water/sludge approx. 2.4 m³/13.3 m³; 4.4 m³/11.3 m³, piston with 2 piston seals and seal pressure regulation, hydraulically upward-opening full-cover lid with hydraulic latch (galvanized) and one suction connection at the bottom and top, sludge chamber level indicator with external scale with divisions of 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the control panel, over-suction protection, oil separator, HD pump Pratissoli KF 32H (approx. 120 l/min at 170 bar) hydraulically driven, protection against water shortage, pressure regulation steplessly, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 19, 40 m are available, spray gun, suction boom hydraulically pivoting (approx. 270°) with a suction hose DN 100, at the end there is a suction pipe DN 100 with a length of approx. 3500 mm, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash tank 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon light at the rear, reversing camera

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * 2 units in stock * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Power boom EVO Power ARM Gen2 * 2 x turbine * Turbine operating hours: 1,058 h Pgodpfxoz I Ic De Ab Tsu * Compressor operating hours: 943 h * DINO 12m³ container * Stainless steel lining, complete * Power boom EVO-POWER ARM GEN2 * Rotating suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Biodegradable hydraulic oil * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the power boom * Light package III: LED light strips in the toolbox * Light package IV: Cable reel * Light package VIII: Light bar on the rear * 4 flashing beacons (switchable on the rear) * Anti-slip coating on the lid * Ball-head trailer coupling 3.5t * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Pedpfx Abezul Sfs Tjgu

Condition: used, mileage: 434,511 km, power: 335 kW (455.47 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Municipal vehicle * Sun visor * ABS * ASR * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Sunroof * Driver comfort seat * Seat heating * Differential lock, rear axle * Rotating beacon, orange * Air dryer * Driver airbag * Radio * Auxiliary heater * Cool box * Rear view camera * Lift/steerable axle * Air intake on top Pjdozup Ukepfx Ab Tsgu * Trailer coupling * 2-line air connection * Duomatik air connection * Hydraulic connection for trailer * 12-speed * Suspension: Air * Payload: 10450 * Continuous brake: Retarder ----Superstructure: Müller VACUMASTER F140 EKGH suction unit (year of manufacture 2012) with flushing system, GGVS/ADR for class AT + FL, next tank inspection acc. to ADR 02/27, tank material S355J2+N, tiltable, tank volume: 13,800 liters (water chamber 1,155 liters), extension piston, hydraulic tailgate, floor control + remote control, hydraulic hose reel at the rear left 80 m / DN 13, CVS vacuum pump VacuStar W 1300 R (1,240 m³/h), high-pressure pump Speck P45/60-160 (57 ltr/min, 160 bar). Hydraulic connections for trailer operation. Recorded operating hours: vacuum pump: 3,309 h, HD pump: 403 h----ADR class FL incl. EX/II, EX/III + AT Sale only to commercial businesses. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, sales discussions are our general terms and conditions (see imprint for details).

Condition: excellent (used), Year of construction: 2000, WAFIOS FMU 1 Includes: Reel Includes: Tools as shown in the photos Pedpezl T S Isfx Ab Tegu The machine is powered and can be inspected by appointment.

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Pgsdjzuur Uspfx Ab Teu Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,540 kg, load capacity: 245 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis ABB IRB 6700-245/3.00 was manufactured in 2023. It features a payload capacity of 245 kg and a reach of 3.00 m, making it suitable for various applications. The robot arm is equipped with advanced software extensions, including collision detection and multitasking capabilities. If you are looking to get high-quality automation capabilities, consider the ABB IRB 6700-245/3.00 robot arm we have for sale. Contact us for further details. - Protection Rating: Standard- Calibration Method: Axis Calibration- Controller Variant: Single Cabinet Controller IRC5- Supply Voltage: 400V- Power Connection: Plug HAN HSB 6p+E- Main Switch: Rotary switch- Cabinet Ambient Temperature: Up to max. 45°C- Manipulator Cable Length: 7 m- FlexPendant Cable Length: 10 m- FlexPendant Option: Removable (Jumper plug included)- Software / RobotWare: RobotWare 6- Software Extensions: World Zones, Path Recovery, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, MultiFunction- Safety Options: SafeMove Pro, PROFIsafe F-Device, Safety Module- Fieldbus / Network: ProfiNet I/O Master/Slave, Ethernet connection on connector panel, Ethernet M12 on base plate- DressPack Configuration: For Material Handling (Base to Axis 3)- Operating Mode Selector: Keyless Selector 3 modes- Service Socket: 230V- Included Accessories: Cable reel 10 m Pedpoztrtmefx Ab Tegu