Used Rim for sale (2,843)

Condition: used, Year of construction: 1991, Technical details: pressure: 2000 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm Kdsdpfx Absy Alw Hsvon stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm Kdsdpfx Absu Icwtovsn equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. *

Condition: used, Year of construction: 2015, working range: 550 mm, compressed air connection: 8 bar, type of input current: three-phase, overall weight: 5,000 kg, input current: 49 A, power: 25 kW (33.99 HP), We offer this used Störi Mantel UKS 850 pallet manufacturing machine, manufactured in 2015. Modification: OPTIM Date of manufacture: 11/2015 Serial number: 215 85 012 Kdjdpfx Abezdkygsvjn Maximum tool size: 550 mm Rated voltage: 3×400/50 V/Hz Rated current: 49 A Machine power consumption: 25 kW Air pressure: 0.8 MPa Total weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2006, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, We offer this used Varimixer Bear ERGO AE10UVL3 stirring and beating machine, year of construction 2006. Machine type: AE10UVL3 Machine number: 100006642 Motor power: 3.0 kW Kodpfey Nczcox Abvedn Motor current: 7.5 A Number of phases: 3 Frequency: 50 Hz Voltage: 230/400 V Production year: 2006 We have three Varimixer Bear Ergo Series Planetary Mixers available to close down our factory up north in Iceland (where the machines are located). These premium, Danish-built machines are designed for powerful, consistent mixing with top-tier ergonomics and safety, reducing operator strain and injury risk. With durable construction, hygienic design, and versatile attachments, they deliver long-term value for busy commercial kitchens and bakeries. We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Rondo ZGP665.C (year 2000) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components. Kdjdpfx Abjtmrkrovon

Condition: used, Year of construction: 2005, Measuring range 1.000 mm error limit 20°C +/- 1°C 3 + L(mm) / 300 µm repeatability 2sec: 2 µm Resolution 0,01 / 0,001 mm adjustment speed max. man. 1 m/s Power 0,7 - 1,6 N temperature +10 .. +40 °C total power requirement 15 W weight of the machine ca. 15,0 kg dimensions of the machine ca. 0,4 x 0,4 x 1,30 m Height Measuring Device TRIMOS - V 1002+ - Application area: 1.235mm - Max. angularity deviation: 12µm - Autonomy with air cushion: 30h - Autonomy without air cushion: 100h Kdedpexgu Igofx Abvjn

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site. Kdodpfx Aoxlii Ajbvjn

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Price on request. Kdjdpfx Abexxkm Njvjn

Condition: ready for operation (used), Primutini bombing machine Kjdpfx Ajwt Nxpobvsdn

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Ksdpfozbxn Uex Abvedn Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure.

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Kdsdoxdwkfepfx Abvjn Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: excellent (used), PRIMULTINI SHARPENER Ksdpfx Abewfci Eovsdn

Year of construction: 2005, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 150 mm Kdodpfx Abey T Sz Tjvsn WORKING AREA: 3000 x 1500 mm SOURCE: CP 4000 ; 4000 W CONTROL UNIT: PRIMACH 20L ACCESSORIES: FUME EXHAUSTER

Condition: used, Year of construction: 2016, functionality: unexamined, total width: 1,200 mm, total length: 1,700 mm, total height: 900 mm, overall weight: 250 kg, type of input current: three-phase, input voltage: 400 V, Automotive assembly line with belt conveyor unit Manufacturer: GRIMM Drive motors: 2 pcs (0.09 kW) Control system: GRIMM inverter-controlled Kedpfx Abszcnbmjvedn Conveyor belt length: 1600 mm Conveyor belt width: 300 mm Direction change mechanism: FESTO Frame structure: BOSCH profile Machine dimensions: length 1.7 m, width 1.2 m, height 0.9 m Weight: approx. 250 kg

Year of construction: 2015, operating hours: 44,309 h, condition: ready for operation (used), total width: 13,550 mm, total height: 7,510 mm, pressing force: 408 t, product length (max.): 18,000 mm, This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details. • Application: Door panel FAT/FOT (Left Hand / Right Hand) • Connected Load: 692 kW • Rated Current: 1000 A • Voltage: 400 V AC / 24 V DC Kjdey Rpk Hopfx Abvedn • Frequency: 50 Hz • Operating Pressure (Pneumatic): 5–7 bar • Air Consumption: < 300 l per cycle • Pneumatic Connection: G 1/2 • Pneumatic Air Quality: Dried / Un-oiled • Ambient Temperature Range: 15–40 °C • Relative Humidity: 20–70% (non-condensing) • Noise Level: < 82 dB • Main components included: • HOP400 Press: 4000 kN press force; 2500 x 1800 mm press area; approx. 79,000 kg • HOP300 Calibration Press: 3000 kN press force; 2100 x 1300 mm press area; approx. 24,000 kg • Feeding Table: 2400 x 1800 x 1100 mm • Hydraulic units for form and calibration presses • Tool change systems (Left and Right)

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V Kodoy Rpdtjpfx Abvedn • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: used, No. 3130-02 Block bandsaw Primultini 1300 SG Used, year of construction approx. 1980 Right-hand version Kdjdpfourmvaex Abvsn Roller diameter 1300 mm Blade support width 140 mm Saw blade 150 x 1.1 mm Clearance height with block carriage CFA according to drawing 1075 mm Cutting height with block carriage CFA according to drawing 700 mm Cutting width with block carriage CFA according to drawing 530 mm Electric blade guide and blade tensioning Main motor 380 V, 50 HP Block carriage PRIMULTINI CFA, length 8000 mm 5 automatic clamping blocks Electric closing and opening of the hooks Electric clamping and adjustment Hydraulic feed by means of cable pull Electro-hydraulic block turner with 2 arms System already dismantled Electrics and controls must be partially replaced Total weight approx. 10 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, total width: 1,000 mm, total length: 2,500 mm, total height: 2,150 mm, Colour: Grey Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Serial number: 73101 - Drive system: Conventional - Power [kW]: 2.8 Ksdpfoytf Ryjx Abvjdn - X-axis travel [mm]: 1000 - Table length [mm]: 1700 - Table width [mm]: 770 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 45 - Max. Reach [mm]: 1450 - Tool holder: MK5 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2500mm x 1000mm x 2150mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Ksdpfoy R Azrsx Abvedn

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, PRIMULTINII SIF 1600 band saw, in very good working condition. Kdodpfxeyha A Tj Abvon

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source Kjdpfx Aexx R A Dobvjdn DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: new, Primus shock absorber. Kdedpozaazysfx Abvjn

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Kodpfx Aexfiw Tsbvedn Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 211 10 017, functionality: fully functional, operating hours: 1,415 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 450 mm, saw blade diameter: 550 mm, height adjustment type: mechanical, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 2,900 rpm, total length: 7,075 mm, total width: 1,350 mm, total height: 1,992 mm, overall weight: 2,700 kg, table height: 850 mm, year of last overhaul: 2026, cutting length (max.): 5,200 mm, compressed air connection: 6 bar, extraction nozzle diameter: 160 mm, hole diameter of the disc: 80 mm, table width: 950 mm, working height: 850 mm, Equipment: CE marking, documentation/manual, saw blade guard, The FLS technology with a floating unit represents a modern and versatile method for the longitudinal splitting and formatting of materials, placing a strong emphasis on production flexibility. This proven technology enhances yield, work productivity, and maintains the quality of wood material with particular attention to the cleanliness of the cut. FLS circular saws are characterized by a high level of safety and straightforward operation. The saw offered above features premium equipment compared to the standard configuration. This includes, for example, clamps on the sliding back pusher, an automatic workpiece ripping mode, two joysticks, and more. Further details available upon request. Kjdpsubbubjfx Abvedn

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 47,813 h, machine/vehicle number: 302C104, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Prima Power, laser source model: CP 4000, laser hours: 42,420 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, type of cooling: water, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, We are offering this used Prima Power Zaphiro 1530 laser cutting machine, manufactured in 2010. The machine was last operated as a standalone unit and is still functional. The PC and software are already running under VM Ware. Ksdpfsy Umv Uex Abvedn If you have any questions or require further information, please feel free to send us a message or call us.