Used Roller Chain for sale (10,911)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) Isdozuykvopfx Ac Ejtk with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Iodpfxjxw Rcuo Ac Eetk Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Ijdpfx Aek Aa Iwsc Ejtk Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 working days Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers Isdpfetx A Sxjx Ac Ejtk as good as new condition

Year of construction: 2012, condition: ready for operation (used), A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y: 330mm/1000mm, filter area: 14m²/cartridge, extraction capacity: 10000m³/h, with compressed air cleaning. 8) Final filter with pleated filter elements, 2x 2 filter elements, filter element dimensions X/Y: 915mm/915mm, separation efficiency: 99.9%. 9) Control cabinet with controller: Moeller Easy 820/618. 10) Operator panel with beacon/signal light, display, start pushbutton, key switch, emergency stop pushbutton and pressure gauges for operating pressure and inlet pressure. 11) Pressure vessel Maschinen- und Behälterbau GmbH, type MB 030603-1.1000, year of manufacture: 2012, volume: 1000l, permissible pressure: 11bar, min./max. permissible temperature: -10°C/50°C. Documentation available. An on-site inspection is possible. Isdpozp Rg Rsfx Ac Eotk

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Equipment: CE marking, documentation/manual, Automatic edge bander with EVA glue pot, chain panel feed, pre-milling, and corner rounding units. Technical features and options: • Feed speed: 9 m/min • Permissible panel thickness: 8 – 50 mm • Permissible edge thickness in rolls or strips: 0.4 – 3 mm • Permissible edge thickness in strips (manual feed): max 5 mm • Maximum edge roll diameter: 800 mm • Minimum panel length: 110 mm • Minimum panel length for cross-cut unit VR1/VS1: – With workpiece height h=18 mm: 180 mm – With workpiece height h=50 mm: 210 mm • Minimum panel width: 70 mm Machine equipment: • Conveyor belt with rubber pads • Pressure beam with bearing-mounted rubber rollers • Automatic edge feeder Isdpfxey Izkts Ac Eetk • Pressure rollers • Extendable support for safe positioning of large workpieces • Touchscreen control panel • Automatic cleaning agent spray unit (for easier removal of glue residue and to reduce glue buildup) • FLEX quick-change glue pot system • Internal LED lighting • CE certification

Condition: ready for operation (used), operating hours: 350 h, machine/vehicle number: LT70HE25SRAHSH4-SR2SWR, Brand: Wood-Mizer Model: LT70HE25SRAHSH4-SR2SWR Iedpfszln S Nex Ac Ejtk 22 kW electric motor 6.1 m saw length SW10 setworks LMS Operator station Inclined conveyor with board return Chain turner, 3 vertical side supports, central clamp on 2 shafts, 2 motorized rollers with dual cylinders, 2 clamps, absorption roller Band wheels for 50 mm wide blades Debarker Laser sight Leg set for raised frame ("H") Log deck, 2 chains, 6 x 1.66 m

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link chain wheel, conveyor chain wheel -Pitch: 168 mm -Teeth: 8 Ijdpfxjd Tg A Te Ac Eotk -Tooth width: 28 mm -Outer diameter: 437 mm -Take: Ø 100 mm -Price: per piece -Number: 5 pieces -Weight: 63.5 kg/piece

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Itodpfxeuiy Rqo Ac Eek Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Itjdpfxozcymhe Ac Eok Includes delivery & inst

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm Iodpeywdx Sjfx Ac Eetk - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-260018, FICEP Flex FRC 1201 Notching Machine The Ficep FRC 1201 notching machine is part of the modern Ficep Flex series of notching machines. This modern CNC-controlled notching machine is designed for the rapid thermal cutting and notching of H, U, L, flat, and square tubes. The steel profile is positioned in the machine at the cutting location via a roller conveyor using a pulling tong carriage. A robotic arm equipped with the cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD plasma power source, suitable for material thicknesses up to 32 mm, is used. Thicker materials or phase cuts larger than 32 mm are cut using the oxy-fuel cutting unit. Conveyor System: On the infeed side, in front of the Ficep Flex FRC notching system, there is a chain-driven cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a sturdy roller conveyor using a clamp-type measuring cart. The system is designed for 12-meter-long profiles and therefore features 12-meter-long roller conveyors on both the inlet and outlet sides, each with a roller track width of 1,300 mm. To remove the finished components on the outlet side, four chain-driven cross conveyors, each 6,450 mm long, are located downstream of the notching station. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC control system from Mitrol. This reliable CNC control system, manufactured by Ficep’s in-house supplier Mitrol, features Pegaso software, including remote maintenance capabilities and a data transfer interface. Torit DCE Filter Unit The filter unit for dust extraction is a Donaldson Torit DCE. Safety: via fence and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Iedpfszmbgvsx Ac Estk Weight of cutting unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching machine is in very good condition.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Itsdow I U Drspfx Ac Eok Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 80 linear meters. Towing group: lightweight Caterpillar engine Working speed: min/max 0:9 m/min Motor power: HP 2 D8 chain development and d. 37 rollers: 80 meters Straight track to measure: 72 meters Isdpfx Aoxyi Uujc Eotk 90° horizontal bends r= 500 mm: 10 pieces Hook step: 0.80 m Space required for transport: 5 meters free on truck

Condition: used, Year of construction: 2008, Format: 530 ?? 350 ?? 300 mm Speed: 1.500 Stapel/Stunde Power: NULL Net Weight: 4.500 kg Equipment: Feeder Conveyor: Solema Delta ST conveyor belt with index timer and accumulation feature Continuous Product Alignment: Active during transport Turning Station: Programmable product rotation: 90?? left/right and 180?? Pressure disc for product positioning during rotation Servo-motor driven with product gap creation function Pallet Elevator Platform: Roller surface platform Pallet Compatibility: Compatible with all standard pallet types Pallet Discharge: Motorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine Capacity: Up to 6 pallets Flexibility: Handles various pallet types and dimensions Design: Compact footprint Automatic Interleaf / Sheet Feeder Programmable: Placement on empty pallets or between designated layers Requirement: Requires straight-cut, wrinkle-free interleaf sheets Reject / Emergency Ejection Station Stack Height Detection: Integrated photocells for monitoring stack height Itedpfxezpzw Te Ac Eek Quality Control: Detects and ejects non-compliant stacks to prevent counting errors and s Control System User Interface: Windows-based touchscreen operation panel Job Memory: Recipe management to save and recall job settings Automated Changeover: Automatic format changeover via servo mot Pallet Discharge System Conveyor Type: Motorized chain conveyor (length corresponds to one pallet size) Discharge Height: Approx. 130 mm above pallet height

Condition: used, Year of construction: 2006, Format: 0x0 Itsdpfx Acszpzw Ho Esk Equipment: Infeed:Solema Delta ST conveyor belt with cycle memory and accumulation featureContinuous product alignment during transport Turning Station:Programmable product rotation: 90?? left/right and 180??Pressure disc for product positioning during rotationServo-motor controlled with product gap creation function Pallet Elevator:Roller-surface platformCompatible with all standard pallet typesMotorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine:Capacity: 6 palletsFlexible pallet type and dimension handlingCompact design Automatic Interlayer Feeder:Programmable: placement on empty pallet or at defined layersStraight-cut, wrinkle-free interlayers required Reject Delivery:Integrated stack height control cellsNon-compliant stacks are detected and ejected to prevent counting errors and stack instabilityPrevents faulty stacking before palletizingManual ope Control System:Windows-based touchscreen operating interfaceProgram memory for saving and retrieving jobsAutomatic format changeover via servo motorsNew job data can be loaded while the machine is run Pallet Discharge System:Motorized chain conveyor (length corresponds to one pallet)Discharge height: approx. 130 mm above pallet height

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Iedpfxjl Ikzgj Ac Eetk Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: Iedov S Dn Dopfx Ac Ejtk For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. Iodpswgbw Refx Ac Estk 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-maintained HIT arc conveyor / board or panel separator, robust design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with slat carriers, 6x2, 2 pairs. Itodexl Edispfx Ac Esk Integrated edge roller conveyor. Transfer cross conveyor, can be raised and lowered. Slab flap. Drive with SEW geared motor with brake. Arc conveyor bolted in the middle for transport. Disassembled and ready to be loaded onto a truck. Ideal for use before a double edger or stacking system.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg Ijdpfx Acex S Hmzj Estk - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: Ijdpfjxlb E Aex Ac Eetk - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Itedpsztr Nuofx Ac Ejk Variable Speed Pulley Used #10 Dies

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator Itedpjux Si Hofx Ac Eok - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled Ijdpfx Acszd Riuo Estk * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.