Used Roller Chain for sale (12,842)

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 Credeumvkvepfx Ah Uei - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %

Condition: used, temperature: 950 °C, CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mm Cjdpoxr Uagsfx Ah Uori Inlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm System volume: XXX m3 (annealing furnace and cooling section) N2 purge gas volume 420 m3 Furnace design: Roller hearth continuous furnace Material: Tubes Outer diameter: 14 - 180 mm Wall thickness: 0.8 – 8.0 mm Length: 4.0 – 13.0 m Surface before annealing: - - Throughput at 920 °C annealing material temperature and full furnace utilisation 7,000 kg/h (without holding time) Throughput at 700 °C annealing material temperature and full furnace utilisation xxxxx kg/h (without holding time) Reference pipes: 25 x 2.5 x 8000 mm 33 x 3.5 x 8000 mm 40 x 3.5 x 8000 mm 55 x 2.8 x 8000 mm 63 x 4 x 8000 mm 75 x 6 x 8000 mm 110 x 8 x 8000 mm Tube outlet temp., depending on tube surface: 125 - 150 °C Roller pitch inlet roller conveyor: 620 mm Roller pitch inlet box: 620 mm Roller pitch annealing furnace: approx. 430 mm Roller pitch cooling section: 500 mm Roller pitch outlet box: 620 mm Roller pitch outlet roller conveyor: 620 mm Roller dimensions: Annealing furnace: 155.4 x 14 mm 1.4848/1.4832 Front section HD cooling section: 157.0 x 10 mm 1.4826 (7 pieces) Remaining cooling section: 133.0 x 4 mm St 37 Max. permissible roll hearth load at a working temperature of 920 °C and even distribution of the hearth: 350 kg/m Furnace floor: Refractory lightweight brick: 130 mm Insulating bricks: 130 mm Mineral fibre board: 50 mm Side: Refractory lightweight bricks: 230 mm Mineral fibre board: 100 mm Ceiling: Suspended ceiling bricks and wool insulation 330 mm Ceiling thickness Ring bricks for roller passages made of fibre material Number of control zones: 6 (gas-heated) Operation of control zones: - (gas-heated) ON/OFF, with round-the-clock control - (electrically heated) ON/OFF, with thyristor control Thermocouples: NiCr-Ni Temperature recording range: 0 - 1,000 °C Temperature control measuring range: 0 - 999 °C Working temperature range: 450 - 950 °C Max. working temperature: 950 °C Throughput speed: 7.5 - 150 m/h

Condition: used, Year of construction: 2020, operating hours: 1,970 h, Year of manufacture: 2020 Empty weight: 11.200 kg Dimensions (LxBxH): 585 x 228 x 296 cm Crjdpfxjxq Ryae Ah Uoi Engine type: Deutz Deutz TCD 4.1 L4

Condition: used, Modular conveyor chain, modular belt, modular conveyor, Used machine Manufacturer: Rexroth VarioFlow Type: VF plus 65 Overall dimensions: Crodpfsxtwpgex Ah Uji Width: 65 mm In stock: 1,285 m, In 5-meter packaging = 128 euros

Condition: used, Year of construction: 1966, 5 weight 5 t Codpfjvu Hkaox Ah Ueri .

Condition: excellent (used), power: 15 kW (20.39 HP), Year of construction: 2019, operating hours: 1,280 h, Empty weight: 1.900 kg Make of engine: KUBOTA CE mark: yes Technical condition: very good Visual appearance: very good EPA Marked: yes Delivery terms: EXW Csdpfxsxuzrhs Ah Usri Please contact Nedtrax B.V. for more information Bomag BW100 ADM 5 CE + EPA Year: 2019 Reading hours: 1280 H Weight 1900 kg 15.5 KW EPA-Marked CE-Marked In very good condition

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right Crjdpfoumvl Hex Ah Usi - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2014, operating hours: 5,144 h, Single drum roller, vibration frequency 33 Hz, centrifugal force 279 kN, climbing ability 59/64%, engine DEUTZ, good condition, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Csdpfx Asvnnqzjh Usri Please contact us!

Condition: used, power: 115 kW (156.36 HP), Year of construction: 2021, operating hours: 3,330 h, Year of manufacture: 2021 Empty weight: 16.000 kg Crsdsxb Aymepfx Ah Uoi Dimensions (LxBxH): 595 x 231 x 296 cm Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 27 m/min, working width: 400 mm, warranty duration: 12 months, power: 2.5 kW (3.40 HP), Achieve flawless coating results on wood, MDF, and other flat materials with the Soest Roller Coater. Ideal for furniture, flooring, and panel production, it ensures consistent finish quality and high production efficiency. Suitable for applying water-based, UV, LED oil, lye, stain, or lacquer. The RC-L model is specially configured for lacquer applications, featuring dosing and application rollers with blades and a reversible dosing roller. Alternative roller types or the RC-L blade system can be supplied upon request. Contact us for a quotation or visit our Test Center for a live demonstration. Crjdexuh T Eepfx Ah Uoi

Condition: used, Year of construction: 2020, operating hours: 364 h, Serial number: 23026xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17559 - Certified or will be on sale - Registered in the machine register - Only 364 hours Csdpfx Asvg Nrkoh Uori - Good tires - About. 137 cm wide - 5,375 kg - LED roof lights front and rear - Volvo engine - Owner has service history - Ready for delivery Roller ready for delivery Only 364 hours, it shows on it. Owner can document service history. Selling due to little use. Hours: 364 Own weight: 5375 Total Weight: 5375 Year controlled: Yes Width: 137 Model: SD45B

Condition: excellent (used), power: 15 kW (20.39 HP), Year of construction: 2019, operating hours: 1,260 h, Empty weight: 1.900 kg Cedpfx Ahexuzq Ro Ueri Make of engine: KOBOTA CE mark: yes Technical condition: very good Visual appearance: very good EPA Marked: yes Delivery terms: EXW Please contact Nedtrax B.V. for more information Bomag BW100 ADM 5 CE + EPA Year: 2019 Reading hours: 1260 H Weight 1900 kg 15.5 KW EPA-Marked CE-Marked In very good condition

Condition: good (used), Year of construction: 2022, For sale: a large lot of powered roller conveyors (approx. 50 straight sections) and 8 powered roller curves, ideal for anyone looking to build or expand a complete material handling line. - 9 pallets of straight powered roller conveyors (approx. 50 sections, 2,000–3,000 mm per section), providing about 130 meters of conveyor length. - 3 pallets of support legs (approx. 90 units, height approx. 850 mm) - 1 pallet with 8 powered roller curve sections (outer diameter 1,300 mm, inner diameter 700 mm, roller width 400 mm) Specifications: Cjdpfexuvb Rsx Ah Ueri Roller width: 400 mm Leg height: approx. 850 mm Motors: 0.75 kW, 50/60 Hz Section length: approx. 2,000–3,000 mm Supplied 'as is'. The buyer is responsible for any new drive belts. An excellent package for resellers, system integrators, or companies seeking a complete conveyor system at a low cost. Delivered in existing condition ('as is'). The buyer is responsible for sourcing new drive belts as needed, and for all necessary inspection and adaptation before installation. All equipment is sold used, as currently palletized. The buyer is fully responsible for inspection and must verify condition, function, and scope prior to purchase.

Condition: used, axle configuration: 2 axles, first registration: 11/2010, total length: 13,580 mm, total width: 2,600 mm, suspension: air, tire size: 445/45 R 22.5, wheelbase: 9,000 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Refrigeration/deep-freezing unit - Air suspension - Disc brakes = Further information = Axle configuration Tyre size: 445/45 R 22.5 Crjdsxuhqwopfx Ah Usi Axle brand: Other VALX Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 70%; tyre tread right: 70% Rear axle 2: Tyre tread left: 20%; tyre tread right: 20% Weights Unladen weight: 7,560 kg Payload: 30,440 kg Gross vehicle weight: 38,000 kg Functional Loading platform height: 120 cm Condition Damages: none Identification Registration number: OL-76-FP

Condition: used, Year of construction: 2020, operating hours: 2,860 h, Year of manufacture: 2020 Empty weight: 16.000 kg Csdpfxexqfdto Ah Uori Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, Year of construction: 2017, with coolant system, hydraulic clamping, infeed and outfeed roller conveyors, and one separate control/operating panel Cjdpfxjxpy Ece Ah Ueri

Condition: used, Year of construction: 2012, Serial number: 1000145H0A01xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17561 Credpfx Ahovg N Tzj Uoi - Certified - Registered in the machine register - 5135 hours - Total width cm 231 - Services are followed by the owner - 12,100 kg - 97 kw - Transport height 287 cm - Length 600 cm - 12 km/h - Delivery by agreement The train is in good condition and has only had one owner. It comes with Trimble GPS from approx. 2017. owner has himself carried out services along the way. Delivered by agreement. Own weight: 12100 Model: CA3500D

Condition: used, power: 75 kW (101.97 HP), Year of construction: 2006, operating hours: 7,850 h, Empty weight: 13.500 kg Make of engine: DEUTZ CE mark: yes Delivery terms: EXW Production country: DE Please contact Nedtrax B.V. for more information Hamm DV 90 TO CE + EPA Year: 2006 Reading hours: 7850 H Weight 13500 kg Cedpfx Ajxuzqweh Usri Motor DEUTZ 74.9 KW Made in Germany CE-Marked In good condition

Condition: used, Roller conveyor, length,1500 mm - Working width 1300 mm - Overall width ~ 1.590 mm - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb Csdpfx Asvupd Aeh Uori - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 - Location, in stock

Condition: good (used), Year of construction: 1995, functionality: fully functional, roll diameter: 80 mm, roll width: 200 mm, total width: 250 mm, total height: 400 mm, total length: 280,000 mm, without drive, - 65 units with 3.00 m length, roller pitch 100 mm additionally: - 7 roller conveyors: 6.00 x 0.50 x 0.61 m, roller diameter: 50 mm; width: 250 mm Crsdpfx Aowc Akqsh Uji

Condition: used, Year of construction: 2019, operating hours: 423 h, Ammann ARX12 Roller from year of manufacture 2019 with only 423 operating hours! ---- * Manufacturer: Ammann * Model: ARX12 * Year of manufacture: 2019 * Recorded operating hours: approx. 423 * Operating weight: approx. 1,475 kg * Working width: approx. 80 cm * Water sprinkler system * Transport length: approx. 2.02 m Crjdjxuynhjpfx Ah Uei * Transport width: approx. 0.86 m * Transport height: approx. 1.8 m * Good condition * Video available on request * Price: 9,900 Euro, net plus 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information subject to change and without guarantee. Errors and prior sale excepted.

Condition: used, Year of construction: 2019, operating hours: 788 h, Ammann ARX36 Roller from year of manufacture 2019 with only 788 operating hours! ---- * Manufacturer: Ammann Cedpfoxuym Dex Ah Ueri * Model: ARX36 * Year of manufacture: 2019 * Indicated operating hours: approx. 788 * Operating weight: approx. 3,725 kg * Working width: approx. 1.34 meters * Transport length: approx. 2.8 m * Transport width: approx. 1.34 m * Transport height: approx. 2.33 m * Water sprinkler system * Good condition * Video available via WhatsApp * Price: €15,900 net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information without guarantee or warranty, subject to errors and prior sale.

Condition: used, Year of construction: 2019, operating hours: 963 h, Hamm HD13VV roller from year of manufacture 2019 with only 963 operating hours! * Manufacturer: Hamm * Model: HD13VV * Year of manufacture: 2019 * Indicated operating hours: approx. 963 * Kubota diesel engine * Operating weight: approx. 3,965 kg * Working width: approx. 1.3 meters * Good condition * Water sprinkling system * Transport length: approx. 2.9 m Cjdpjxuym Rofx Ah Ujri * Transport width: approx. 1.43 m * Transport height: approx. 2.59 m * Additional photos and video upon request (WhatsApp) * Price: €18,900, net + 19% VAT For further questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details are provided without guarantee; subject to errors and prior sale.

Condition: used, Year of construction: 2019, operating hours: 282 h, HAMM HD8VV Roller from year 2019 with only 282 operating hours! ----* Manufacturer: Hamm * Model: HD8VV * Year of manufacture: 2019 * Recorded operating hours: approx. 282 * Operating weight: approx. 1,580 kg * Unladen weight: approx. 1,450 kg * Kubota diesel engine / 14.8 kW * Water spray system * Transport length: approx. 2.295 m * Transport width: approx. 0.88 m * Transport height: approx. 2.21 m * More photos & video available on request (WhatsApp) * Price: €11,900 net + 19% VAT. ----For further questions, please call: Crsdpfx Asxuynujh Usi Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without guarantee. Subject to prior sale and errors.

Condition: used, Year of construction: 2019, operating hours: 417 h, Ammann ARX12 roller from year 2019 with only 417 operating hours! * Manufacturer: Ammann * Model: ARX12 * Year of manufacture: 2019 * Recorded operating hours: approx. 417 * Operating weight: approx. 1,475 kg * Working width: approx. 80 cm Codpsxuynbofx Ah Usri * Water sprinkling system * Transport length: approx. 2.02 m * Transport width: approx. 0.86 m * Transport height: approx. 1.8 m * Video available on request * Price: 9,900 EUR, net + 19% VAT For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without guarantee or warranty; errors and prior sale excepted.