Used Rotary Label Press for sale (16,734)

Condition: like new (used), Year of construction: 2023, load capacity: 2,000 kg, Sideros turning device, column lift rotary unit, one side mobile with positioning table, 2-ton load capacity. Brand new, year of manufacture 2023, unused, with remote control. Minimum working height 350 mm, maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical lift 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotary movement 0.75 kW. Lifting motor 1.85 kW. Unit height 2505 mm. Weight approx. 1050 kg. Condition as new, unused. Shipping possible. Includes documentation, plans, etc. Godpfx Aljy Hl H Ne Uskc

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. Gkjdpfx Aljyzzh Eo Usc A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) Gksdjzqnxtjpfx Al Uoc 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm Gkodpfxoz Egh Tj Al Usc -Weight: 120 kg

Year of construction: 1998, condition: used, 1998 Jesse V810-500 Vertical Hydraulic Press, 500 US Tons Capacity with Siemens Simatic HMI CNC Control (Electrics upgraded by Siemens in 2020) 453 Tonnes Capacity. Stroke Approx 2,750mm. Daylight Approx 3,500mm. Platen Dimensions Approx 3,000mm x 2,300mm, (Upper Platen 10,000kg, Bottom Platen 11,570kg). 3 Hydraulic Cylinders - (2) Outer Cylinders & (1) Inner Cylinder. Floating Bed. Brake Systems Side & Top. Stand Alone Electrical Cabinet. Charge Loader, Dimensions Approx 1,500mm x 4,000mm Long. Proximity Switches. Note: All Electrics Were Completely Stripped Out & Upgraded to Siemens by Oilgear UK in 2020. Gksdpez E R Svefx Al Ujc Walkway Platform & Access Ladders (Installed 2020). Cutting Bench with Foot Control, 415 Volt, Width of Cut Approx 1,700mm. Bramley Engineering LEN105 Pneumatic Height Adjusting 4-Suction Handling Unit. Dimensions of Machine Approx 3,910mm x 2,500mm x 8,670mm High. Weight Approx 40 Tonnes. Power 37.3kW, 415 Volt, 3 Phase. Maximum Pressure 248 Bar (3,600 PSI), Air 5.5 Bar (80 PSI). Note: Structure of Machine checked every 12 months - All Manuals, Paperwork/Invoices available to view. Note: Suitable Machine Dismantling & Electrical Disconnection Company Details Available. Pit Depth of approx 965mm required to hold the Lower Bolster. The Bolster is Equipped with (4) Mounting Pads.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system Gedpfx Aszvnpisl Uskc - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: ready for operation (used), Konica Minolta Bizhub 1100, with only 2.3 million copies, tested and ready to print. Drum and developer with less than 10% usage! Gkodpfx Alsz Dt Ans Uoc Equipment: - PF 709 - FS 532 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping, to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: excellent (used), Logopak 920 II PF Pallet Labeling System Manufacturer: Logopak Pallet Labeling System Model: 920 II PF Your advantages at a glance: Top speed (up to 240 pallets/hour) Reduced roller changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Print engine quick-change system Thermo-direct or thermo-transfer printing process for labels up to A3 Internal database, error diagnostics and many other features Functions as a stand-alone solution or integrated into the network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick aluminum cast housing with solid steel hinge plates was specifically developed for continuous operation in harsh industrial environments. The printer can be controlled either externally via a serial interface or, thanks to its integrated intelligence, operated as a stand-alone device. SPECIFICATIONS Printing speed: 150 mm/s Core diameter: 50 mm / 76 mm Label roll diameter: 180 mm Font size: 2 mm – 50 mm Printing direction: Rotatable by 90°, 180° and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network compatible Memory (RAM): 1 MB battery-buffered CMOS memory, expandable to 8 MB Ambient temperature: 5 °C to 40 °C Gkodpfsw U Tc Tjx Al Uoc Dimensions (W x L x H): 700 mm x 500 mm x 400 mm Weight: approx. 50 kg Housing: Painted steel Integrated Intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal article database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbps) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine Gkjdpfezninwex Al Uoc Robust and reliable radial drilling machine from the reputable manufacturer “Csepel”, model RF50/1250. This machine is characterized by its solid construction and is ideal for workshops, metalworking shops, or demanding DIY enthusiasts. Technical specifications (according to the nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse rating: 16 A, slow-blow You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Rotary vane vacuum pump RC 0100E 5Z1 Suction capacity: approx. 100 m³/h Vacuum: 20 mbar Gkjdet Sq Hiepfx Al Usc 400V/50Hz You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, type MBG 004.124. The machine has a pressing force of 40 kN, equivalent to approximately 4 tons, and is suitable for industrial insertion, joining, assembly, riveting, embossing, and upsetting operations. It is worth noting that the machine has a valid inspection certificate until 04/2027. Technical data: Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product type: Press / Insertion machine / Joining machine Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Working stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine number / Electrical: 210193.1 Rated voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Gkjdsznkvpepfx Al Usc Rated current: 0.5 A Fuse rating: 16 A Protection class: IP65 Standard: DIN EN 60204 Wiring diagram: STE 325-26 Country of manufacture: Germany Inspection valid until: 04/2027 Condition: used The press operates with a total stroke of 200 mm. The actual working stroke is 80 mm, providing a maximum pressing force of 40 kN. The machine is suitable for inserting bushings, bearings, and bolts, as well as for assembly, riveting, embossing, upsetting, and joining operations. Please refer to the images for details on the exact condition and scope of delivery. You can find more presses and industrial machines – new and used – in our shop! "Everything from one source: We would be happy to offer you suitable financing for your project." PD

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Godpfxsz I Tkts Al Ujkc Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Gksdpfxshtyxlo Al Ujc Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1971, Max. pressing length: 2500 mm Max. pressing width: 1300 mm Total pressing force: 60 t Press opening width: 350 mm Gkedpfxoz Hl Nre Al Uoc Heating plate material: Aluminum Operation: Hand lever Number of pressure plungers: 6 pcs Approximate weight: 3500 kg Dimensions: 3230 x 1340 x 1775 mm Location: Nattheim

Condition: used, Labeller that applies a label to the top and the bottom This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side. Gksdpjz Ndf Refx Al Uec It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Label heads: 2 (above and below the belt) Controls: Touchscreen Construction: Stainless steel frame on adjustable feet

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Gkodpfxsz Rnn Tj Al Ujc Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery - Godpfx Aoi Amnpjl Uekc

Year of construction: 1966, condition: good (used), Used, well-maintained eccentric press, Weingarten, with pneumatic retraction, piece counter, documentation, press test book, spare parts (2 pallets). Pressing force: 1500 kN (150 tons) Stroke: 60 mm Ram, small/large stroke: 10 – 140 mm Overhang: 550 mm Cylindrical mounting: 30 mm Table width x depth: 1200 x 1000 mm Gkedpeir I Slefx Al Uoc Dimensions width x depth x height: 150 x 270 x 290 cm Weight: 13,500 kg Technical data and dimensions: Subject to change without notice.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Gksdeiidm Nspfx Al Uoc Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. Gksdpfx Aleh D If Ho Uec - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Compact design Highest reliability Gsdpfxshkzu Ao Al Uokc High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Gedpfxefthzkj Al Ujkc Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Gksdpfjhtaaqox Al Uec Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t Gkedpfxsu Nfine Al Usc dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. Gkjdpfx Aleu Nfize Ujc *