Used Rotary Shaper for sale (4,060)

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Fpjdpowuyzwofx Ahnsh Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: excellent (used), - Compressed air consumption: - Pressure: 6 bar - Consumption per cycle: 24 Nm³ - Required flow rate: 200 Nm³/h - Inlet diameter (mm): - Pipe diameter: 50 mm - Valve diameter: 32 mm - Electricity: - Centrifugal pump power: 15 kW - Hydraulic power for the gate: 3 kW - Gear motor power: 5.5 kW - Process water: - Storage volume: 1,700 dm³ - Make-up water inlet diameter: 50 mm Fpjdpfx Ahjzbt Szsneh - Make-up water pressure: +3 bar - Discharge diameter: 65 mm - Pump flow rate: 450 m³/h - Heat exchanger: 450 m² - Consumption may vary depending on the cycle and the temperature before and after sterilization.

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Fjdperwq Ursfx Ahnsph Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L Fpedpfx Ahjd E A I Nonoh No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition Fpodpfx Ahodzp T Nenoh The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Year of construction: 2017, Rotary indexing table Manufacturer: Expert Tünkers Type: EDX810/0250/8 Year of manufacture: 2017 8-station table (45° increments) Fjdpfxjyl Swwo Ahneph 3626

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Fpjdpfjzbl N Ssx Ahneh

Condition: used, ZUMBACH - JUROCA Z 14 is a Rotary transfer machine of high precision, engineered for excellent accuracy and reliability. Capacities: 14 working positions, 6 CNC-controlled and 8 mechanical; 1 loading/unloading station; table travel 20 mm; workspace 40 mm; screw diameters 75/35/42 mm; spindle speeds 3000–18000 t/min; production 35 pcs/min. Technical data: 3x400 V 50 Hz supply; machine weight ~3500 kg; footprint 2000×2000×2400 mm; control cabinet 1200×1200×2100 mm. Equipment: integrated control cabinet (dimensions given). Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Fpedpfx Aoy S Dfzshneh

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 horizontal 12 vertical 6 Total units 18 Circular indexing 0.7 seconds Number of collets 12 Type B45 Maximum clamping 45.00D diameter Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Fpedpfevt Ummjx Ahnsh Exhaust nozzle Stairs

Condition: like new (used), Autoclaves are used to sterilize packaged products that require high temperatures (+100°C) to eliminate or inactivate pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater challenges in heat transfer. Examples include vegetables in whole, grated, or diced form, and beverages such as smoothies, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, agitating the contents and preventing the pieces closest to the sides of the container from burning. Tray dimensions: 600 mm x 400 mm x 100 mm. Total dimensions of the loading cart: 1500 mm x 1400 mm x 820 mm. Fpodpezbi U Eofx Ahnoh Dimensions of the static structure (5 trays): 700 mm x 50 mm x 54 mm. INCLUDES: - Pressure pump. - Heat exchanger: - Brand: Barriquand Steriflow - Type: POT DE RECUPERATION.

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Fsdpfxsmb Urdj Ahnjph Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, table load: 45,000 kg, table width: 2,100 mm, total length: 3,000 mm, Rotary table MITSUBISHI - DIT-A Mitsubishi Rotary table 3000 x 2100 x 45 T V-Axis 1500 mm MACH-ID 6015 Make: MITSUBISHI Type: DIT-A Year: 1970 Table Length: 3000mm Table Width: 2100mm Table load: 45000 Movement V-axis: 1500mm Rotation B-Axis: 360.000° Rotation speed B-Axis:0,02 - 0,60Omw/min. Length: 0mm Width: 0mm Height: 0mm Weight: 0kg Fjdpjwvkczsfx Ahnsph

Condition: good (used), Year of construction: 2020, table load: 7,000 kg, table width: 1,200 mm, total length: 1,200 mm,   Build with double hirth coupling T slot 22 with Jump off 200 mm Diameter off center hole 50 mm Table Length: 1200mm Table Width: 1200mm Table load: 7000 Rotation B-Axis:1 or 5 Gr.° Fpedpfxewq Rmco Ahnoh Length: 1200mm Width: 1200mm Height: 340mm Weight: 2000kg

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Fjdpfx Aheyu Nb Eeneph Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: good (used), Year of construction: 1972, Length: 16500mm Width: 2100mm Height: 2100mm Fpsdpswry Iljfx Ahnsh Weight: 0kg

Condition: excellent (used), Year of construction: 1965, table load: 60,000 kg, table width: 3,250 mm, total width: 3,250 mm, Indexing dividing setting: 1e stage full rotation setting 5 Gr 2e stage full rotation (fine) 30 " Turning rotation setting: 1e stage 1 - 48 Rpm 2e stage 0,27 - 11 Rpm   V-Axis movement setting: 1e stage 10 mm 2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm  Scraped guide way 2 size: 225 x 85 mm Scraped guideway 3 size: 250 x 85 mm Table Ø: 3250mm Table load: 60 T Movement V-axis: 1800mm Rotation B-Axis: 360000° Fedpfx Ahjx S Ihaenjph Rotation speed B-Axis:48Omw/min. Movement speed V-axis:1600mm/min. Length: 6900mm Width: 3500mm Height: 1400mm Weight: 25000kg

Condition: good (used), Make: SCHIESS FRORIEP Type: DV 45 Year: 1980 Specifications Metric US Standard Table Length 3000 mm Table Width 3000 mm Table load 40000 Movement V-axis 1600 mm Rotation B-Axis 360000 ° Rotation speed B-Axis 100 Grad/Min Omw/min. Movement speed V-axis 4500 mm/min. Dimensions (Estimate) Fpsdpfoku Aalox Ahnjh Length 5320 mm Width 3000 mm Height 1080 mm Weight 24000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length Fpsdpfx Ajkwcdbohneh 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Absolute rotary encoder, encoder -Type: AMG 73 S W29 S2048 Fedpfx Aod Ttrrohneph -Factory No.: Quantity: 1 available -Price: per piece -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 06.2431.771, functionality: fully functional, We are delighted to present this Revent 724 O/G IOC Rotary Oven, built in 2012 and maintained in very good condition. The oven comes complete with five working racks, all in good condition and ready for immediate use. Fodpfx Ahsyi D Amenjph For further details, specifications, or to arrange a viewing, please feel free to contact us by phone or message — we will be happy to assist you

Condition: used, machine/vehicle number: 12531, AZO Rotary Sieve New Motor Sold with 7 synthetic sieve sleeves: 0.2 mm / 0.5 mm / 0.6 mm / 1.4 mm x 2 / 1.5 mm / 4.5 mm Electric: 400 V Fpodpfxswpwklo Ahnsh Motor Power: 1.5 kW Sieve Inlet (mm): 250 x 250 Sieve Diameter (mm): 175 Sieve Length (mm): 340

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Drent Gazelle 6 Imr (Blue Series) Model: P (485 mm) Year: 1998 4 wet offset printing units Web width: 485 mm Print width: 485 mm Paper weight: 40 to 180 gsm Mechanical speed: 250 m/min Delivery: reel-to-reel, reel-to-fold, reel-to-sheet Fsdpfozcal Rox Ahnoph Printing cassettes: 24" (12"), 22" (11"), 23"+1/3 (11"+4/6 x A/4), 18" (9"), 17" (8"+3/6), 15", 14" Cross-hole perforation cylinders Grafi-control system Archive holes Double-track perforations (SHOEBER) Magnetic cylinder station Die-cutting station with waste removal Stack delivery folding station Rewinding station Punching machine + folding machine for offset plates Trim and confetti extractor Etc. Complete with all accessories for operation, manuals, and wiring diagrams Location: Italy Availability: Immediate Condition: Good (still in operation)

Condition: used, functionality: fully functional, Equipment: CE marking, IMMEDIATE AVAILABILITY (Great Deal!!!): Small Continuous Forms Production System, consisting of: 1- EDELMAN Form All continuous forms rotary press, 2-color offset with Roland-matic dampening system, roll-to-fold delivery, equipped with printing cassettes and perforation cylinders in the following formats: 8", 11", 12", 14". 2- Pack-to-pack collator with Crimp-Look, Multiflex, and Numbering stations (including cams, rings, and numbering holders in various formats). Machines in "excellent condition" and ready for immediate delivery. We can disassemble them and load them onto trucks or containers, and we can also arrange shipping upon request. Fodpszb Uy Hofx Ahnoph

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Fpsdpfx Asukg Srohnjh Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, type of input current: AC, overall weight: 120 kg, compressed air connection: 6 bar, power: 0.18 kW (0.24 HP), Rationator CS80 automatic disc dispenser, sorting machine Fully automated, variable dosing speed. Stainless steel. Harness: Rationator CS850 Fedeukha Depfx Ahnoph