Used Rotary Transfer Machine for sale (68,146)

Condition: ready for operation (used), Year of construction: 1993, A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Iiodpfx Aoytgpwop Doh

Condition: ready for operation (used), Year of construction: 2021, DELTA LC 400 / Year of manufacture 2021 / Rotary table grinding machine Iodjzrpdmepfx Ap Doih -CE marking -Year of manufacture 2021 -Magnetic table - rotary table 300mm -Max. grinding diameter 400mm -Distance column - grinding spindle axis approx. 315mm -Grinding height - magnet - grinding wheel approx. 215mm -Grinding spindle speed 2840 rpm -Fine feed 0.01mm -Lateral retraction device -Spindle motor approx. 3 KW -Dimensions of cup wheel 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight approx. 800kg Subject to errors and omissions.

Condition: ready for operation (used), DELTA LC 400 – Rotary table grinding machine - Magnetic clamping plate (rotary table) 400 mm - Max. grinding diameter 400 mm - Grinding height (distance table - grinding wheel) approx. 230 mm - Spindle speed 2850 rpm - Fine feed 0.01 mm - Distance column - grinding wheel axis approx. 320 mm - Spindle motor 3 kW Iijdpfeznvcbjx Ap Djh - Grinding wheel dimensions 200x80x78 mm - Lateral grinding wheel dressing device - Machine housing - Coolant system - Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight approx. 700 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Turret head B-axis with 1° division Belt filter system included Isdpfx Asvt A Rtep Doih

Condition: good (used), Ceever Spraymaster Turning Spray Washing System The industrial washing systems in the Spraymaster series are advanced solutions for spray cleaning small to medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table that enables uniform wetting of the parts with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 Volt Current consumption: 90 A Connected load: 62 kW You can find more new and used items in our shop! International shipping costs available upon request! Iisdox Ex Nzopfx Ap Doh

Condition: ready for operation (used), Rotary table surface grinder ARTER A3 - 16 - Grinding diameter approx. 450mm - Grinding height approx. 220mm - Workpiece weight approx. 250kg - Automatic feed - Coolant system - Machine enclosure - Work light Iisdpfxszpfz Ao Ap Deh Dimensions: L x W x H 2.5 x 1.5 x 1.7 meters / Weight approx. 3500kg Errors and omissions excepted.

Year of construction: 1967, condition: good (used), WKG 234 Offered here is a rotary table continuous milling machine milling from the company Müller of the type Duo Främatic. 
Technical data: Manufacturer: Müller Type: Duo Främatic Year of construction: 1966 Tool holder: ISO 50 Round table clamping surface inside: 650x1490mm travel: endless rotary small feed: 100mm/min large feed: 2000mm/min Isdpfog Ummaex Ap Dsih max. rotational speed: 650 rpm low speed: 88 rpm speeds: 8pcs weight: 5t milling spindles: 2 pieces distance table to spindle: 350mm power requirement: 27kW Remark: Suitable for carbide cutter heads (ø315mm) for light metal up to ø400mm. cutter lifting automatically with 1mm possible quill adjustment each 100mm drive of milling spindle separately possible There are several machines available!

Condition: good (used), Year of construction: 2002, The EUBAMA S6 is a 2002 model bench-type machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 330 mm Maximum output (cycles/minute): 40 Iedsv Ef N Aopfx Ap Djih Hydraulic clamping system Machine control: CNC Siemens SINUMERIK Number of processing units: 15 FMB MT/42/4200/B driver magazine Magazine loading capacity: 4.2 meters KNOLL chip conveyor KNOLL coolant tank (VRF 250/1250) The machine is in working condition.

Condition: excellent (used), For sale: a CNC rotary table from the renowned Fadal Engineering (USA) brand, model VH65. A professional 4th axis designed for machining centers, especially Fadal VMCs, but it can also be integrated with other CNC machines using a suitable controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multi-pin connector • Serial number: 4630298 Condition: used, mechanically sound, with normal signs of wear. Solid and heavy construction – ideal for precise 4-axis machining. Iiodpfxsz Slc Se Ap Djh

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Machine Brand: Technica Machine Model : Rotaflex DV 25/15 The Construction Year : 2006 Iiedpfsz Hmfbex Ap Djh The machine will be refurbished before delivery. Made in Switzerland Number of Stations : 15 Stations Number of Modules : 14 Modules Number of Spindles : 26 Spindles Tool Holders : HSK-32 Condition of the Machine : Refurbished Complete electrical-electronical refurbishment, new Fanuc CNC control system Necessary mechanical refurbishment Accessories : 1) NORDMANN Tool Monitoring 2) Kraft&Bauer CO2 Fire Extinguishing System 3) STÄUBLI TX60 Robotic Arm 4) MAPAL Recessing Heads

Condition: used, _____ Description: Year of manuf. : 2018 Iiodpfx Asvr Az Nsp Deh Control : Fanuc 30i-B In General: Year of construction:2018 Control system:Fanuc Processing stations:5 pieces Loading station:1 piece Travelling range: X-axis:450 mm Y-axis:500 mm Z-axis:450 mm Rapid traverse X/Y/Z:50 m/min Turret: Number of stations:8 Speed:13,300 rpm Torque:58 Nm Tool holder:HSK 63 C Workpiece/device: Dimensions max.:350 x 350 x 350 mm Max. permissible mass:250 kg Media supply line:6 pieces NC swivelling rotary table: A-axis:+/- 150° B-axis:360° Max. load:250 kg Table diameter:320 mm Equipment: Loading/unloading:Fanuc Robot M20i-A Chip removal:2x chip conveyors Coolant supply:IKZ system, 20 bar Position measuring systems:Direct in all axes

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013. Iijdpsydplcefx Ap Djh

Condition: good (used), functionality: fully functional, machine/vehicle number: C7154, Powtek - gericke rotary sieve housing: steel rotor: steel inlet: stainless steel Ø300mm Iedpfjvz Smmox Ap Deih outlet: stainless steel Ø300mm transition sieve deck: nylon sieve deck 2mm coarse outlet: adjustable

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Iijdpfxswugh De Ap Doh Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Iedpfx Apexr Dh He Djih

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition Iodpfeu Tln Nex Ap Doih

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units Isdpfjnvdmwsx Ap Deih rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Iodpfx Aozhw Tnop Deih

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 30i, _____ Description: Year of manuf. : 2011 Control : Fanuc 30i In General: Year of manufacture:2011 Control system:Fanuc 30i Maximum table load:100 kg Travel range X/Y/Z:300/300/370 mm Installation weight:approx. 33,000 kg Machining station I (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station II (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Iiedozfu Rfepfx Ap Deh Tool diameter/length:125/250 mm Machining station III (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station IV (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Loading station: Numbers:2 pieces (front and rear) Equipment: Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 30 bar Tool breakage monitoring:Artis, type CTM V5 Zero-point clamping system:Erowa Emulsion mist separator:Reven

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Iodpfx Ast Nhmujp Djih

Condition: used, machine/vehicle number: 65333, Equipment: type plate available, Rotary indexing machine No. 171 Coil winding machine Blume & Redecker 8 stations, double flyer, max. wire diameter: 2 x 1 mm No. 170 Coil winding machine Blume & Redecker 8 stations, single flyer, max. wire diameter: 1.4 mm Iisdpfxjylx Tls Ap Dsh

Year of construction: 2025, condition: new, Rotary Table Blasting Machines provide efficient and uniform surface cleaning for castings, forgings, and metal components. Using a rotating table and high-performance blast wheels, they remove rust, scale, paint, and contaminants to prepare parts for coating or further processing. Ideal for small to medium batch production, these machines offer consistent quality, reduced manual labor, and reliable performance in industrial environments. Iodoxzzi Topfx Ap Doih

Condition: used, Year of construction: 1989, Technical details: rotary table diameter: 630 mm grinding height: 350 mm grinding head - power requirement: 11 kW grinding length: 600 mm max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m Iedpfx Ajz E Hu Hop Deih The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. *

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) Iiedpfsu N Ivqox Ap Doh * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Iodpsxxv D Hofx Ap Doih