Used Rotating Cutting for sale (20,908)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Itodpfx Ajzkg H Nsc Eok Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm Itedpfx Acjzrf Nre Eek MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Iedjy E Hynspfx Ac Eetk Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, paper width (min.): 508 mm, paper width (max.): 1,270 mm, number of feeding trays: 1, Equipment: documentation/manual, raster image processor, Polielettronica LaserLab 127cm 50" Digital Lab Photography The word compromise does not exist at Polielettronica, the maximum in terms of quality and productivity are the only possible targets. Just for this the LaserLab is equipped with a solid state RGB laser unit, it is the only exposure system which allows the maximum in term of colour depth, colour separation, tone continuity and maximum details in the Highlights and Shadows. The Polielettronica 16bit/colour graphic processor guarantees the complete transfer of information from image to paper. The Laser alignment system and the optical transfer, through a single fiber optic developed at Polielettronica, guarantees the maximum quality of each of the 1,393,545,600 pixels (1,3GB) needed to expose a 127x254cm. All this in 60 seconds! The paper is cut and positioned into the drum. The exposure unit starts to move on the air cushion and the mirror rotates to reflect every point on the paper. The laser unit converts the image data coming from the computer into a laser beam, then transfers it to the drum via fiber optic. The exposed paper is delivered to the paper processor, at the same time a new exposure begins from point 1. Resolution: 305/254dpi Exposes at maximum size in 60 seconds! Specifications: Exposure Section Laser: R - G - B Solid State Definition: 305/254dpi Itedpfxeyn Rf Ss Ac Ejk Calibration and Exposure Data Processing: 16 bit/colour Optional: up to 1016dpi Drum Exposure System: guarantees maximum quality for each pixel (focus - overlapping - shape) on all exposed surface. Pure Black & White Kit: On request. Print size: From 508x508mm to 1270x2540mm, From 20x20" to 50x100" Paper Widths:Any from 508mm (20") to 1270mm (50") Productivity: Size: 127x250cm (50x100") Width: 1270mm (30") prints/hour: 18 Large Size, Great Handling: The paper box remains at ground level and is easy to load; if it`s necessary to work on medium format, both the 50 and 76cm boxes can be used (available as optionals). They are the same boxes used on the LaserLab 50 and 76, light and easy to handle. Machine used, but well maintenance over the time so it is precise. All the transportation's cost and customs will be managed by the buyer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Ijdpfxszrnhwj Ac Eetk Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW Itodpjzu Ayysfx Ac Esk - Hegla cross-cutting station STB I 33 - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable Iodpfsxy Hqtox Ac Eetk -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: good (used), Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop Itodpfx Aoyv Il Hoc Eok It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - Right roller conveyor mm 4000 x 200 Overall dimensions for transport: Machine mm 1200 x 1500 x 1500 - 2 roller conveyors mm 4000 x 200 x 300 h Weight kg 530

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Itjdpfoihf Tpex Ac Eek Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q3/2026; equipment can still be adapted to meet specific needs. Iedeyzqwcjpfx Ac Ejtk Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and workpieces. For re-sharpening hammer jaws, involute gear cutters, helical bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, bevel gears, skiving tools, deep-hole drills, and other workpieces/components. Work area: X-axis 630 mm Y-axis 345 mm Z-axis 430 mm C-axis rotation angle 300° X3 auxiliary axis: Work area 400 mm Grinding spindle: Interface HSK80 (conversion to HSK50 possible) Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis (A-axis SK50): Center height Standard 175 mm Speed as spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Extraction system: LTA Fire extinguishing system: Kraft & Bauer Truing unit Tailstock optional Further accessories/workholding devices available from the extensive A.Haas workholding catalog. Individual, customer-specific training. Includes pre-acceptance at the manufacturer’s plant, IBN (Initial Batch Number), training, and final acceptance at the customer's site. Financing options available upon request.

Condition: excellent (used), Year of construction: 2008, table length 4000 mm Itodpou N I Erjfx Ac Esk table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Itodpfszichyex Ac Eek Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: like new (used), High volume production of small components including stair wedges, stair glue blocks, corner blocks for chairs, filler pieces, and more. Key Features: Self centring grippers and centreline cutting with angles of +/-60 degrees. Hopper fed with a standard length capacity of 1350mm - components are collected in box underneath. Produce up to 800 pieces per hour. Small footprint to maximise floor space. Condition - As New [only been used for showroom demonstrations.] 1350mm x 200mm x 80mm Capacity Cutting thickness from 10mm to 80mm Cutting width from 10mm to 200mm 3 seconds per operation - feeding, cutting & drilling = 9 seconds Up to 60m/min advancement speed Iodpfx Acozd Uxme Ejtk 4kW saw motor +/- 60 degree rotation - mechanical adjustment Completely enclosed interlock saw cabin Outfeed conveyor belt

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Itsdpfjw Rpvbsx Ac Esk Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Laser diode 22726

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, total length: 3,350 mm, total width: 1,510 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll Iedpfx Acetp T Dts Eetk * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: excellent (used), Catalog number 8070 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Minimum length of workpiece: 120mm - Minimum width of workpiece: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Operating speed: 6.4m/min Itedpfjzukzxex Ac Eek - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Rotational speed: 10000 rpm - Dust extraction port: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES - Manufactured by the Austrian brand Holzmann - Single-sided automatic edge banding machine - Unpainted - With polishing unit - Used machine, very good condition The edge banding machine features the following units: pre-cutting, edge trimming, polishing, and a remarkable independent saw unit. Net price: 12500 PLN Net price: 2976 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox Ijdpfxst A Ar Sj Ac Ejtk - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) Itedpszug Stjfx Ac Esk • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components Iedpfxjvcbrhe Ac Ejtk - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 2022, Electronic Double Head Cutting Saw – PERTICI 500TS / 500TS-22 Electronic double head cutting saw by PERTICI INDUSTRIES, designed for high-precision cutting of PVC and light alloy profiles. The machine is equipped with a fixed left head and a movable right head with automatic linear and angular positioning electronically controlled. Ideal for the professional production of windows and doors. Main features Automatic double head cutting saw Movable right head with automatic positioning Automatic head rotation: 90° / 45° (500TS) 90° / 22.5° (500TS/22) Programmable electronic control 15” TFT Touch Screen monitor USB and Ethernet ports Windows CE / Windows Embedded operating system Cutting list optimization Automatic profile height correction Possibility to work with one head only Full pneumatic safety guards Two-hand safety cutting control system Machinable materials PVC Plastic materials Light alloys / aluminium Cutting capacity Available lengths: 4,000 mm 5,000 mm 6,000 mm Maximum cutting length: up to 6,100 mm Blade Ø 500 mm (optional Ø 520 mm) Automatic cutting angles: 90° Isdpfx Aey Rl Syoc Estk 45° 22.5° (TS/22 version) Technical data Number of blades: 2 Motor power: 4.4 kW each Blade speed: 2800 rpm Power supply: 400 V three-phase Air pressure: 6.5 – 8 bar Weight: approximately from 1670 to 1910 kg Blade peripheral speed: up to 76.2 m/s Equipment Horizontal and vertical pneumatic clamps Side roller supports Full cutting area safety protections Industrial label printer preparation 15” Touch screen on Windows platform Profile thickness probe (electronic profile thickness detection device) – photo no. 7 Central anti-bending profile support – photo no. 8

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase Isdey Tlc Dopfx Ac Estk - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW, including loading on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Itsdpfx Acoktffzj Eok Official Dealer CNC Top Ten b.v. Coevorden Holland

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Iodpfx Asytrpvec Estk Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 122 kg, LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES Laser cutting and engraving machine for the signage and promotional marketing industries - made in USA ▪ CO2 laser tube in a sealed metal housing, 25 KW power, air-cooled, 10,640 nm wavelength, approximately 30,000 working hours lifetime. ▪ The laser source can be quickly replaced using the 'Quick-Change' system, without technician intervention or the need to realign the laser beam. Universal manufactures only RF-Excited sealed CO2 laser sources, which provide constant power output and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed as the front side is open. ▪ Working area: 610 x 457 mm Iedpfjytdtysx Ac Eotk ▪ Honeycomb cutting bed - minimizes contact between the material and the reflective engraving table and more efficiently removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Electrical connection: 220 – 240V / 5A The package includes the following optional features: ▪ BOFA filter, 400 m3/h air flow – allows use even in enclosed commercial spaces ▪ Focusing lens with a 2.0” (5.08 cm) focal length and 0.125 mm focal spot diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for marking metals ▪ Rotary attachment included – maximum object diameter for rotation: 203 mm ▪ “Air-Assist” cooling and cleaning system – Delivers a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps to clean the equipment’s optical components (mirrors + lens) ▪ Metal cone for directing airflow at 90 degrees onto the material ▪ Back-Sweep – hose for directing airflow at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operating software: user interface allowing for automatic or manual control over power, movement speed, laser pulses (PPI), and other system settings. Includes a materials database with predefined settings according to the processed material; simply select the material type from the list and the driver loads the optimal parameters for cutting/engraving. Settings for custom materials not in the standard database can be saved, stored, and loaded. To maximize processing efficiency, the interface can estimate the remaining time for engraving or cutting. ▪ Additional 1Touch Laser Photo software – for high-precision engraving, including for complex image engraving.

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Itedpfx Acsztncqs Ejk Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)