Used Round Timber Sorting Dare for sale (5,027)

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Dujdpfx Asyq St Nebhep Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 11000 € 211.2 € 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min Dujdpoyq St Aefx Abhop 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Dsdpfx Aboyq Stvshoup Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Dodpfx Aox S Dxbebhsup Standard configuration Extended machine accessories

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Dodpfxjx S Dwqs Abheup Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:2 or 3 station variants possible:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Dujdpfxedzqn Ds Abhsp Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm Dusdpfxov Ed Svo Abhep - Steel base without central bore Weight 785 kg good condition

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Duodpfx Abogmi U Sehep Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Brusa di Garboli TV 65 dowel milling machine Dsdpjyl Uqmsfx Abhjup Year of manufacture: 1998 Max. milling diameter: 65 mm Min. milling diameter: 15 mm Number of cutter heads: 1 Min. workpiece length: 350 mm Main motor power: 5.5 kW Max. feed rate: 18.5 m/min CE marking present

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. Dusdpfx Ajwv Tqbsbhep - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Dedjynfxgjpfx Abhjup Weight: 300kg Easy to use, quick to set up.

Condition: used, mileage: 290,700 km, power: 427 kW (580.56 HP), first registration: 06/2019, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Air horn - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Rotating beacon - Disc brakes - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windscreen Internal reference number for customer inquiries: 5-026 MAN TGX 33.580 6x4 BL with OPTIPA short timber bolster body and TajfunLIV 120Z timber loading crane at the rear. IMMEDIATELY AVAILABLE AT SPECIAL PRICE €89,999.0 net Truck - Vehicle Description: - LED daytime running lights, fog lights, position lights, and tail lights - Leaf/air suspension - Wheelbase 4,500 mm + 1,350 mm - Tires: Front axle 385/65R22.5, Rear axle 315/80R22.5, Additional axle 315/80R22.5 - Engine D3876LF07 - 580 HP / 427 KW Euro 6 SCR 2900 Nm C-R OBD-C - MAN TipMatic 12 30 OD, with retarder 35 - Differential lock on rear axle - Aluminum fuel tank 390L + 80L AdBlue - Ringfeder 4040 G 150B trailer coupling - Central locking with remote control - Electric sliding roof - All exterior mirrors electrically adjustable and heated - NORDIC cab insulation (for cold climates) - EBERSPÄCHER auxiliary heater - Automatic climate control Dusdpsyrrz Aefx Abhep - Digital axle load display (ALM) in the cab for air-suspended axles - Trailer data display (axle load) in instrument panel - Fully retractable refrigerator under sleeper bunk - Steering brake - Driver's comfort seat, air-suspended with lumbar support, shoulder adjustment, and heating - Multifunction leather steering wheel, adjustable in height and tilt, with parking position - Single lower sleeper bunk - Storage compartment at rear cab wall with gooseneck lamp, control module, alarm clock, and charging station - MAN Media package navigation - Navigation SD EUROPE - Hands-free Comfort function for two mobile phones - and much more Bodywork: PAVIC short timber body OptiPa Type 6850 as bolster structure mounted on a MAN 3-axle truck chassis 4 x Optipa-SL bolster bodies in black (incl. 4 Ls-hooks) with 8 x Optipa-AL7 conical aluminum stakes (inner side) with green stripes and white Optipa logo Sturdy steel bulkhead Access boxes Toolbox Loader crane: TAJFUN LIV 120Z 96 crane Financing available through our financial service providers. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications. General Information Cab: Long-distance Technical Information Number of cylinders: 6 Engine displacement: 15,256 cc Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: leaf spring Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: air suspension Rear axle 2: Tire size: 315/80-22.5; Differential lock; Suspension: air suspension Weights Curb weight: 15,260 kg Payload: 17,740 kg Gross vehicle weight: ...

Condition: new, - Capacity 700 x 2 mm - Conical rolling - Removable top roller Dusdeihv Hpepfx Abhsp - Foot control - Emergency stop - Documentation - 400V

Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop Dedpfx Abohc Uvmjhoup - documentation - 400V

Condition: new, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, roller length: 2,070 mm, sheet thickness steel (max.): 4 mm, - Capacity 2070 x 4 - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamp) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamp) Duodpfx Aohvr Nlsbhop - Continuously adjustable speed - Hardened rollers - Tapered rollers - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller diameter: 180 mm, - Capacity 2070 x 8 mm (minimum diameter 900 mm) 2070 x 6 mm (minimum diameter 270 mm) Pre-bending capacity 2070 x 6 (minimum diameter 900 mm) Pre-bending capacity 2070 x 4 (minimum diameter 270 mm) Dusdpfx Abjvn Eqrehsp - 4 rollers - Hydraulic - Hardened rollers - Diameter of upper roller 180 mm - Diameter of lower roller 180 mm - Diameter of side rollers 150 mm - Digital display for the movement of the left roller - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down Removal system with middle and side rollers - Hydraulic balancer system - Overload protection - Documentation - 400V

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Hardened rolls - Conical rolling - Emergency stop - Documentation Duedjgg Nv Sjpfx Abhep - 400V

Condition: new, BRAND NEW NC ROTARY TABLES Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Duedem Tvz Dopfx Abhep Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Duodpfxjm Tv Azj Abhsp Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dedpfx Aoyk Hrmobhoup Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Dujdpfx Asd Hintobhop Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: new, Round vibrator for slide grinding, different sizes available. New machines! Manufacturer: Eurotec Innovation GmbH Model: RA11 Gross volume: approx. 250 liters Net volume: approx. 175 liters Nominal power consumption: approx. 2.5 kW Channel width: 260 mm Connected load: 400V - 16A - 50Hz Dujdjhmp Dfjpfx Abhop As a manufacturer of vibratory finishing systems, dryers and process water technology, we can supply you with a broad portfolio of systems for deburring, grinding and polishing. Please visit our website to learn more about our products. RA round vibrators are particularly suitable for processing bulk goods in large quantities. The workpieces are reliably guided onto the built-in sieve surface thanks to the gently rising container bottom. The large sieve surface with tangential outlet ensures reliable workpiece separation and offers the option of using magnetic separators. Depending on the component dimensions and batch quantity, the RA round vibrators are available in various container sizes with volumes from 150 to 1,550 liters. Areas of application: - Vibratory grinding and polishing of bulk goods in large quantities - Rust removal, descaling, deburring, rounding - Processing of various materials (aluminum, steel, stainless steel, plastic, ...) - Fine grinding and polishing of workpieces A corresponding electrical switchgear is required to operate the system. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: new, Year of construction: 2025, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot control - Emergency stop Duedsh Raytopfx Abhop - Documentation - 400V

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 4521, total length: 8,000 mm, total width: 2,500 mm, input voltage: 230 V, power: 4.3 kW (5.85 HP), Marelec Grader for continuous sorting on weight with batching possibility. Used to weigh between 20 - 1500 grams. 120 pcs/min. This grader has been in use from June to December since 2014 due for seasonal production. Duodpfx Abev Hzcbjhjp Maintanance have been followed continuously with more extensive maintanance done at the end of season. Grader and carry away belts are not mounted on the picture, but in ok condition. There is also alot if spare parts that follow if interested. See picture. All operations are functional. We are selling because we need higher capacity.

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Duodpfowcqpnox Abhsp Bottom roll diameter: Ø330 mm Year: 1972