Used Route Control for sale (47,624)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, Heat transfer medium: water Maximum supply temperature: 90 °C Gbedpfe Ah Rlqjx Am Eew The unit has been inspected and is ready for demonstration. Flow rate: 60 l/min. Heating capacity: 9.5 kW.

Condition: ready for operation (used), Year of construction: 1997, Make: ECOCA Type of machine: EL-6120E Year of manufacture: 1997 Control system: Mitsubishi M520 Machine's weight: 5.500 kg Tool holder: Multifix Godpfxo Ai Tuas Am Esbw x-travel: 290 mm Speed range: 99 – 1.600 U/min Bed width: 400 mm Rapid feed: 10 m/min Cutting diameter: 610 mm Turning length: 2000 mm Overall dimensions: 3.900 x 1.760 x 1.650 mm Height of centers over bed: 305 mm Spindle opening: 105 mm Spindle power: 11 / 15 kW

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 -Input: 1.5 kVA -Output: 1 kW Gsdpfspb Eatjx Am Eobw -Dimension: 315/230/H60 mm -Weight: 2.9 kg

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 650 mm turning diameter over support: 380 mm turning length: 2000 mm centre height: 320 mm centre distance: 2000 mm spindle diameter in front bearing: 140 mm spindle speeds:: 10 -3000 U/min motor capacity: 22 kW spindle bore: 103 mm Godpfx As Ait I Som Ejbw diameter of quill: 110 mm tailstock taper MT: MK6 tailstock travel: 200 mm weight of the machine ca.: 5,2 t Dimensions (LxWxH): 4,4 x 2,3 x 1,8 m The machine is suitable for precision machining of medium to large turned parts, as well as long shafts and rotationally symmetrical workpieces. With a distance between centers of 2,000 mm, a swing diameter over the bed of 650 mm, and a spindle bore of 103 mm, it offers versatile applications in general mechanical engineering, single-part production, as well as repair and maintenance operations. The machine is equipped with a Heidenhain cycle control system, enabling economical machining of both simple and more complex turning contours. The robust machine construction, the specified maximum torque of 2,050 Nm, and the generously dimensioned main spindle also allow the machining of larger workpieces. The equipment includes a Sandvik Capto C5 / PARAT toolholding system and two steady rests for additional support of long workpieces. *

Condition: excellent (used), Year of construction: 2005, ORYCON Hot runner controller 980-F High-quality industrial control mainframe manufactured by Orycon Control Technology Inc. (USA). This reliable unit is designed for precision control in industrial plastics processing systems. Technical Specifications: 1. Manufacturer: Orycon Control Technology Inc., Ocean, NJ, USA 2. Product Type: Mainframe / Control Unit 3. Catalog Number: 98CF-09-S-A-EU REV 2 4. Serial Number: 020665F37 5. Power Supply: 240 VAC, 3-phase 6. Max. Load: 20 kVA 7. Certifications: CE Compliant 8. Origin: Made in USA Gjdj Aiuciepfx Am Esbw Condition: Used equipment, in good technical condition. Ideal as a replacement unit, spare part, or core component for an existing production setup.

Condition: used, functionality: unexamined, Ferwood Code: RU0002713 - Manufacturer Code: SE23400220 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Gbsdpfev Dvm Ajx Am Eow

Condition: ready for operation (used), functionality: fully functional, Selling a comprehensive CNC tool package, including a tool storage rack. Gbjdpfx Ame Ah Slte Esw The package includes numerous high-quality tool holders and clamping systems, including those from: BIG DAISHOWA SCHUNK BIG-PLUS spindle system MEGA NEW BABY CHUCK Hydraulic chucks Collet chucks Various milling cutters and other tool holders The tool holders come from industrial use and show corresponding signs of wear. Everything will be sold together, exactly as shown in the pictures – including the red tool storage rack and all tools and holders inside. Ideal for CNC operations, toolmaking, machining, or as an addition to an existing tool inventory. Due to its size and weight, only pickup is possible. If you are interested or have any questions, please feel free to contact me.

Condition: excellent (used), Year of construction: 2003, ORYCON Hot runner controller 980-F High-quality industrial control mainframe manufactured by Orycon Control Technology Inc. (USA). This reliable unit is designed for precision control in industrial plastics processing systems. Technical Specifications: 1. Manufacturer: Orycon Control Technology Inc., Ocean, NJ, USA 2. Product Type: Mainframe / Control Unit Gjde Aiufdspfx Am Esbw 3. Catalog Number: 980F-09-A-EU REV 2 4. Serial Number: 031115F09 5. Power Supply: 240 VAC, 3-phase 6. Max. Load: 20 kVA 7. Certifications: CE Compliant 8. Origin: Made in USA Condition: Used equipment, in good technical condition. Ideal as a replacement unit, spare part, or core component for an existing production setup.

Year of construction: 2024, condition: new, For sale: Masoneilan Camflex II industrial control valve, equipped with a pneumatic actuator and an ABB PositionMaster EDP300 digital valve positioner. Manufactured in 2024, this assembly is suitable for industrial process control applications. Valve specifications: * Manufacturer: Masoneilan / Baker Hughes * Model: Camflex II 35-35112 * Valve type: Rotary control valve * Year of manufacture: 2024 * Nominal size: DN50 / 2” * Pressure class: ASME Class 300 * Body material: ASTM A216 WCC * Flow characteristic: Linear * Cv: 50 * Fail position: Closed * Serial number: N-24-006659 * ATEX-rated actuator Positioner specifications: * Manufacturer: ABB * Model: PositionMaster EDP300 * Type: EDP300 B1H1S2C D1F2S3 * Control signal: 4–20 mA * Communication: HART * Protection class: IP65 * Pneumatic output: Single-acting Gbjdpo Ah T Trofx Am Eew * Year of manufacture: 2024 Included: * Masoneilan Camflex II control valve * Pneumatic actuator * ABB EDP300 digital positioner * Air pressure regulator * Available manufacturer documentation and inspection certificate Condition: Surplus equipment, offered as shown in the photographs. Operational condition has not been verified. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Please contact us for further information or additional photographs.

Condition: used, Year of construction: 1997, CNC lathe, cycle-controlled Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Control system: CNC Plus Swinging diameter over bed, max.: 570 mm Turning length: 1,000 mm Spindle head, size 8 according to DIN 55027 Toolholder cross-section H/W, max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gsdpfx Aez N Ew Nom Ejbw Gear stage 1: Speed range from 3 to 500, stepless Gear stage 2: Speed range from 15 to 2,500, stepless Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock travel, manual Feed rate: longitudinal, max.: 10 m/min radial, max.: 5 m/min automatic feeds: longitudinal + radial 0.01 – 50 Feed force, max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Coolant pump Brinkmann, 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change tool holder Weight, approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 161126ä

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring Gbsdpfswxv Hkex Am Esw – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Gedjgb Ec Hspfx Am Esbw Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Gedpfx Ams Aibdce Esbw Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: excellent (used), Fiege 8-channel hot runner controller, including connection cable and Harting connector. Gbsdpfx Amsyr Eitj Esw This unit comes from a toolmaking facility and was used exclusively for sampling purposes. As a result, it has very few operating hours. The controller is supplied complete with cable. Before use, an electrician should adapt the connector configuration to your tooling.

Condition: new, Unused pump unit with switchgear and accessories, intended for an infrastructure project. The complete lot consists of five pallets. The unit includes, among other things: - 2 Grundfos pumps, type SE1.100.100.40.4.51D.B., each 4 kW. - 2 Grundfos base elbows DN100. - Piping and fittings, including DN100, DN150, and DN200, and HDPE Ø160 mm. - 2 check valves DN150. - 1 gate valve DN150 with extension spindle and operating key. - 3 floats. - 2 lifting chains of 500 kg each, approximately 7 meters long, with lifting eyes. - 4 guide tubes of 2 inch, each approximately 5.3 meters long. - 2 Grundfos guide tube holders of 2 inch. - Various suspension, fastening, and mounting materials. This pump unit is offered via an online auction. Lot number: 9784-1 Opening bid: € 10 Gjdpfx Ams Akc H So Eobw View the auction page for the complete lot specifications, photos, auction terms and conditions, and information about collection and possible transport by an external carrier.

Condition: used, functionality: fully functional, overall weight: 5 kg, Keyence XG-X2200 Image Processing Controller Industrial image processing controller from the XG-X series for automated optical inspection and quality control. Manufacturer: Keyence Model: XG-X2200 Product Series: XG-X Device Type: Image Processing Controller Application: Industrial image processing and quality inspection Image Processing System: XG-X Camera Connections: 4 Supported Camera Technology: Digital industrial cameras Gbjdpfj Ah Eulox Am Esw Communication Interfaces: Ethernet, USB, RS-232C Digital Inputs/Outputs: Available Image Processing Functions: Pattern recognition, measurement, position detection, and error checking Condition: Used Available Quantity: 2

Condition: used, Year of construction: 1998, functionality: fully functional, turning length 2000 mm 980507 x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t Gbodjw Syb Depfx Am Eow

Condition: ready for operation (used), Siemens 1FK6063-6AF71-1AG0 servo motor, serial number: YFM210919803008, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gbsdpfxe Aiahlj Am Esw

Condition: used, 80 Control Units Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Gedezvhnfopfx Am Eobw Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Main control room (1 rack, 1 control panel) Dimensions: LxWxH: 5000 x 900 x 2500 mm. Note!: continues on multiple floors Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November Gjdpfx Ae Ahyibsm Ejbw - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Turning machine, cycle-controlled Manufacturer: Boehringer Model: DUS 560 Year of manufacture: 1993 Control type: CNC Turning diameter 570 mm Turning length 2000 mm Control system: Siemens Sinumerik 805 Distance between centers 2000 mm Turning diameter above the facing slide 365 mm Bed width 360 mm Spindle bore 62 mm Speed range 3-2500 rpm Gear stages 2 Gbjdpj Ah Dlwsfx Am Ejw Tailstock diameter 80 mm Tailstock travel 190 mm Internal taper MK5 Machine weight approx. 5000 kg Machine weight approx. t Machine weight approx. t Space requirement approx. 400 x 181 x 174 cm ADDITIONAL INFORMATION A little-used, cycle-controlled universal turning machine from a research and development institute. A few years ago, the control system was upgraded, thus optimizing the machine to the latest standard at that time. Accessories: 3-jaw chuck Ø 250 mm 3-jaw chuck Ø 315 mm 4-jaw chuck Facing plate Ø 560 mm Steady rest 20 Multifix holders Type C

Condition: used, functionality: fully functional, High-speed analog input module from the SIMATIC ET 200SP series for acquiring voltage and current signals, including a matching base unit. Manufacturer: Siemens Series: SIMATIC ET 200SP Module type: AI 2xU/I 2-/4-wire HS Article number, analog module: 6ES7134-6HB00-0DA1 Article number, base unit: 6ES7193-6BP00-0BA0 Base unit type: BU15-P16+A0+2B Gedpfx Ame Ah T Tgs Ejbw Number of analog inputs: 2, differential inputs Signal types: Voltage and current Connection technology: 2-/4-wire Voltage measurement ranges: 0 to 10 V, 1 to 5 V, -5 to +5 V, -10 to +10 V Current measurement ranges: 0 to 20 mA, 4 to 20 mA, -20 to +20 mA Resolution: Up to 16 bits Measurement accuracy: ±0.3% relative to the input range Minimum cycle time: 125 µs Conversion time per channel: 10 µs Oversampling: Up to 16 values per cycle Nominal supply voltage: 24 V DC Permissible supply voltage range: 19.2–28.8 V DC Current consumption: 39 mA (without sensor supply) Typical power dissipation: 0.95 W (without sensor supply) Sensor supply: 24 V DC, short-circuit proof Diagnostic function: Channel diagnostics Operating mode: Clock-synchronized operation possible Parameterization: STEP 7 / TIA Portal Base unit connection technology: Push-in terminals Base unit connection terminals: 16 Base unit nominal voltage: 24 V DC Base unit current carrying capacity P1/P2: Max. 10 A Base unit current carrying capacity, process terminals: Max. 2 A Base unit potential group: Continuation of the potential group from the left Installation width: 15 mm Dimensions, analog module (W x H x D): 15 x 73 x 58 mm Dimensions, base unit (W x H): 15 x 117 mm Permissible ambient temperature during horizontal installation: -30 to +60 °C Permissible ambient temperature during vertical installation: -30 to +50 °C Scope of supply per unit: 1 analog input module with 1 base unit Available quantity: 6

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 100 mm, total height: 100 mm, input voltage: 24 V, B&R X20SL8101 SafeLOGIC Safety Controller – Ethernet POWERLINK Programmable safety controller from the B&R X20 series with an integrated bus controller, POWERLINK interface, and openSAFETY communication for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SL8101 Series: X20 SafeLOGIC Module type: Safety controller / Central unit Integrated bus controller: Yes Safety communication: openSAFETY Gbjdpfxs Aia A Us Am Eow Maximum number of SafeNODEs: 280 Programming: Automation Studio / SafeDESIGNER Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Interface: Ethernet POWERLINK POWERLINK function: Controlled Node Connections: 2 x shielded RJ45 ports (integrated hub) Transmission standard: 100BASE-TX Transmission rate: 100 Mbit/s Maximum cable length: 100 m between two nodes Minimum fieldbus cycle time: 200 µs Minimum X2X link cycle time: 200 µs Autonegotiation: Yes Auto-MDI/MDIX: Yes Operating mode: Half-duplex Standalone operation: Yes Dynamic Node Allocation (DNA): Supported Supply voltage: 24 V DC (-15 % / +20 %) Maximum input current SL/BC/X2X: 0.9 A Power consumption: 5.3 W Power consumption I/O internal: 0.6 W Power consumption X2X link supply: 1.42 W Output rated power SL/BC/X2X supply: 7 W I/O output rated voltage: 24 V DC Permissible contact load I/O supply: 10 A Maximum number of function block instances: 4096 Memory for flags: 262,144 bytes Stack memory: 32,768 bytes Memory for safe input data: 6144 bytes Memory for safe output data: 2048 bytes Storage medium: Replaceable SafeKEY Potential isolation: Fieldbus to X2X link and I/O Cooling: Fanless Status indicators: CPU, POWERLINK, SafeKEY Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +45 °C Storage temperature: -40 to +85 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 62.5 x 99 x 75 mm Weight: 190 g B&R ID code: 0xE649

Condition: used, Year of construction: 2013, Manufacturer: Vulcanic Model: Vulcatherm Reference : 838447-01 Year : 2013 Type: Temperature controller Condition: new (decommissioned), never put into production. Heat transfer fluid: demineralised water, liquid phase, group 2 Maximum permissible pressure (PP): 10 bar Gedj Afp Uvopfx Am Esbw Heating capacity: 40 kW Temperature: max 90°C / min 10°C Power supply: 400 V, 75 A Weight: approximately 200 kg  

Condition: good (used), Year of construction: 2019, functionality: fully functional, Siemens control system 808D MM+ Working area Swinging diameter over bed (max.) 500 mm Swinging diameter over support 300 mm Workpiece length 2,000 mm Turning length (max.) 1,700 mm Travel distances X-axis 270 mm Z-axis 1,900 mm Main spindle Speed range 60 – 2,000 rpm Spindle mount A2-8 Chuck diameter 250 mm Spindle bore with draw tube 70 mm Rapid traverse X-axis 6,000 mm/min Z-axis 8,000 mm/min Tool carrier Number of tool positions 8 Accuracy Positioning accuracy X / Z ± 0.012 / ± 0.016 mm Repeatability X / Z ± 0.01 / ± 0.014 mm Tailstock Tailstock taper MK 5 Quill diameter 75 mm Quill stroke 150 mm Drive power Main drive 18.5 kW Main drive, constant load 15 kW Torque drive X / Z 10 / 15 Nm Coolant pump 0.125 kW Dimensions and weights Dimensions (L × W × H) approx. 4.12 × 1.75 × 1.84 m Gjdsz Hmz Ajpfx Am Ejbw Weight 3,600 kg The machine can be inspected under power by arrangement.