Used Sajjad Lichner Lathe for sale (5,464)

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Ksdpjxxh N Usfx Ab Ujdw Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Kdjdst Ipi Iepfx Ab Ujw Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: used, manufacture MONDIALE type Gallicop mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kdedpfx Abexx A I Se Usw Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Ksdjxyh Ndspfx Ab Uedw Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Main spindle speed: up to 8,000 rpm Sub spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Kdjdpfxjxb R R He Ab Ujw Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg 10-position turret Rotating tools for complex machining operations FMB Turbo 3-36

Condition: used, Year of construction: 1989, turning diameter 165 mm Kdjdsxyagnopfx Ab Usw turning length 200 mm control Fanuc total power requirement 13 kW weight of the machine ca. 1,7 t

Condition: excellent (used), Year of construction: 1968, Precision lathe, lathe, lead screw lathe, lead screw lathe Ksdpfxow Rd Hbe Ab Uodw -Manufacturer: Schaublin, lead screw and feed screw lathe type 135 -Machine bed: hardened -Turning length: 750 mm -Turn diameter over bed: 315 -Rotation diameter over recess: 355 mm -Turning diameter over support: 150 mm -Spindle bore: Ø 34 mm -Spindle speeds: 45 - 3000 rpm -Wedge bar chuck: Forkardt Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5/3.0 kW -Accessories: Drawer cabinet with 2x bezels, 28x Multifix tool holders, collets, see photos -Lathe dimensions: 960/1700/H1290 mm -Weight of lathe: 1230 kg -Cabinet dimensions: 480/725/H1000 mm -Weight of cabinet: 222 kg

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm Kjdpeqwgzqofx Ab Uedw spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Kdsdpfx Aowz Rywjb Uew Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 215 mm centre distance 750 mm centre height 210 mm hollow 52 mm Kdedpfx Absxxb E Ao Uow 3-jaw chuck Röhm Ø 250 mm spindle turning speed range 31 - 1600 U/min connected load 7,5 kW dimensions ca. 2050x1350x1250 mm number of spindle speeds 18 weight of the machine ca. 1,5 t - Multifix steel holder - Rotary chuck guard - Work light - Chip guard - chip tray

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm Kjdpfxov I Tx Rj Ab Ujdw SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: used, Year of construction: 1985, turning diameter over bed 500 mm turning diameter over slide rest 300 mm turning length 1000 mm Kdedpfexyagbjx Ab Uow

Condition: excellent (used), functionality: fully functional, Schaublin 102VM High-Precision Lathe in very good condition with extensive tooling >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 20 mm >> Spindle nose: Camlock >> Spindle speed range: 3 steps, 40–4000 rpm >> Dimensions (W x D x H): 151 x 57 x 124 cm >> Weight: approx. 560 kg Accessories: Numerous tools in drawer cabinet >> Collet attachment with internal and external step collets >> Three-jaw chuck >> Faceplates >> Change gears >> Clamping devices with holders Kdodjxx Tqwopfx Ab Ujw >> Drill chuck >> Fixed and travelling steadies >> Bed stop >> Machine feet and much more Offered here is a Schaublin 102VM high-precision lathe in very good condition. The machine is fully functional and comes with an extensive range of accessories. All guides are in excellent condition. The cross slides move smoothly and evenly. The lathe runs very quietly even at high speeds. The machine was previously in use at a university. Take the opportunity to view this machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 1999, operating hours: 42,733 h, functionality: fully functional, machine/vehicle number: 01500001111, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 70 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 8 rpm, overall weight: 3,200 kg, Completely overhauled by Gildemeister Bielefeld in 2010 Turning diameter: 500 mm Swing over cross slide: Ø 290 mm Turning length: 1,500 mm Spindle speed range: 8 – 2,800 rpm with three gearbox stages Spindle bore approx. Ø 70 mm Three-jaw chuck Ø 250 mm, Röhm Tailstock quill: MT4 Ksdoxx Uqropfx Ab Usdw

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm Kdodpfx Absu Ix Hde Ujw weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm 104 mm 400 mm Kdodpjxxb A Uefx Ab Usw 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR Kedop T Ulzspfx Ab Usdw

Condition: excellent (used), TSUGAMI-MORI BS32CE(S)-V is a CNC automatic lathe (CNC Swiss type) engineered for precision, high accuracy and reliable production. Working capacities: 7 axes, 2 spindles; max turning Ø 8–32 mm, max length 250 mm; drilling up to 12 mm, threading up to 10 M. Key specs: main spindle 200–7000 t/min, back spindle 200–6000 t/min; driven-tool speeds 200–5000 t/min; spindle motor 5.5 kW, back spindle 2.2 kW; feeds 1–6000 mm/min, rapid 20 m/min; 4 stations, 20 tools, 5 driven tools; weight ~2800 kg, size 2150×1500×1800 mm, air 5 bar. Accessories: LNS Express 332 bar loader (up to 3000 mm, Ø 3–32 mm), parts catcher, lamp, oil‑mist extractor, collet set, RS232 interface, status light. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical. Kodpfexx U Udsx Ab Uodw

Condition: good (used), Year of construction: 2001, operating hours: 16,930 h, functionality: fully functional, machine/vehicle number: 01160012601, turning diameter over cross slide: 420 mm, turning length: 635 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, Heidenhain EP 4290 TP CNC single-spindle lathe with controlled tailstock Gildemeister CTX400 Series 2 V3 Swing diameter over bed cover: 570 mm Swing diameter over cross-slide cover: 420 mm Cross travel: 220 mm Longitudinal travel: 635 mm Speed range: 25–5,000 rpm Kdjdpjxx Upbsfx Ab Uow Spindle bore approx. Ø65 mm Chuck Ø 250 mm, by Berg Three-jaw chuck, hydraulically adjustable with various interchangeable jaws Tailstock with 550 mm travel Tailstock quill MK4

Condition: new, Year of construction: 2025, 0350 mm 196 mm 0650 mm 170 mm Kodpjxxb Azsfx Ab Usdw 42 mm 7,5 kW

Condition: used, HANWHA XP12 SWISS TYPE TURNING LATHE MAKE HANWHA-HANEX, MADE IN KOREA MODEL XP 12 YEAR 1996 CONTROL FANUC OT-C MAX MACHINING LENGTH 140.0 mm MAX HOLE DIA 6.0 mm SPINDLE HOLE DIA 14.0 mm SPINDLE RANGE 100 – 10,000 RPM SPINDLE MOTOR 1.5/2.2 kW TOOL NUMBERS 5+3 TOOLS RAPID FEEDRATE X AXIS: 15m/min Y AXIS: 15m/min Z AXIS: 15m/min MACHINE DIMS 1150 x 830 x 1540 mm MACHINE WEIGHT 900 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED TOOL HOLDERS COLLETS SET OF MANUALS Kjdpfjwidymox Ab Ujdw COMPLETE

Condition: used, Year of construction: 2004, HARE 8 HPIT INDEXING TABLE ASSEMBLY PRESS MAKE HARE, MADE IN ENGLAND MODEL 8 HPIT YEAR 2004 STROKE LENGTH 100.0 mm CAROUSEL 6 STATIONS PLUS 6 STATION AUTOMATIC CAROUSEL Ksdpfx Aswb E Tfob Uodw 8 TONS HYDRAULIC RAM SICK LIGHT GUARDS FULL SET OF MANUALS

Condition: used, Year of construction: 2011, AXE AND STATUS TUSCAN LL-950 X 3000 HEAVY DUTY CNC LATHE MAKE TUSCAN, MADE IN TAIWAN MODEL LL-950x3000 YEAR 2011 CONTROL FANUC Oi-TD TURRET 12 STATION MAXIMUM CUTTING DIAMETER 950.0 mm CENTRE HEIGHT 575.0 mm DISTANCE BETWEEN CENTRES 3000.0 mm SPINDLE NOSE A2-15 Kdsdpfxexvclre Ab Ujw SPINDLE SPEED 9 – 500 RPM SPINDLE CENTRE MT # 6 SPINDLE POWER 30 / 37 Kw TOOL SIZE 32.0 mm TRAVERSES X AXIS: 480.0 mm Z AXIS: 3000.0 mm RAPID TRAVERSES X AXIS: 5M / MIN Z AXIS: 4M / MIN TAILSTOCK YES PLUS TWIN SWARF CONVEYOR 4 JAW CHUCK 3 X STEADIES FULLY FUNCTIONAL FULL SET OF MANUALS TURRET TOOLING

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm Kjdpfx Abexp Nfxo Uedw BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm Ksdpfx Abexnpp Ij Usdw SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER