Used Sales Tents for sale (25,981)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Gsdpjxm Sm Hefx Ah Eebw Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Toolpost

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gbedpfx Ahsxtm Nvo Eow Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Various tool holders Operating manual / Electrical schematic

Condition: ready for operation (used), Year of construction: 2004, operating hours: 32,200 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel Distances X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Work Area Distance between table and spindle nose: 150–650 mm Table dimensions: 1,100 × 600 mm Spindle Max. speed: 24,000 rpm Power: 29 kW Tool holder: HSK-A63 Feed Rates Feed rate max.: 20,000 mm/min Rapid traverse (X/Y/Z): 20,000 mm/min Tool Magazine Tool magazine: 20 tools Performance & Precision Total power consumption: 47 kVA Positioning accuracy (X/Y/Z): 0.004 mm Repeatability (X/Y/Z): 0.002 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Machine dimensions (L × W × H): 3,010 × 3,716 × 3,100 mm Machine weight: 11,000 kg Operating hours: approx. 32,200 h EQUIPMENT XYZ telescopic cover Gsdpfsxtnv Djx Ah Eebw Direct torque limiting coupling Cooler, 1°C above ambient temperature in the workshop Chip conveyor Electronic handwheel Tool length probe HH TS 120 Documentation

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, film width: 600 mm, product height (max.): 100 mm, product width (max.): 200 mm, product length (max.): 250 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum film width: 600 mm Maximum product width: 200 mm Maximum product height: 100 mm Maximum product length: 250 mm Gsdpextd Ensfx Ah Ejbw Output: Max. 100 bags/min Infeed section: Approx. 2.30 m MACHINE DETAILS Required floor space: 4.80 x 1.30 x 1.50 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors Godpsxt Evnsfx Ah Esbw SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 3,870 h, load capacity: 3,200 kg, lifting height: 3,300 mm, free lift: 1,450 mm, mast type: duplex, Equipment: sideshift, No reserve price – guaranteed sale to the highest bidder! The forklift's tyres, tubes, and seat have been replaced. TECHNICAL DETAILS Duplex lift height: 3,300 mm Free lift: 1,450 mm Load capacity: 3.2 t MACHINE DETAILS Overall height: 2,160 mm Unladen weight: 4,637 kg Operating hours: 3,870 h Gbsdpexvpr Sefx Ah Esw EQUIPMENT 3rd valve Side shifter New starter battery

Condition: ready for operation (used), Year of construction: 2016, This Brown & Sharpe XCEL 7-107 CMM was manufactured in 2016. It features a measuring range of 700 x 1000 x 700 mm, equipped with a Renishaw PH10M probe head and PC-DMIS software. Located in Greensboro, NC, with forklift and dock access available. If you are looking to get high quality measuring capabilities consider the Brown & Sharpe XCEL 7-107 machine we have for sale. Contact us for more information. Application Types Measuring Godjxvtz Djpfx Ah Eebw

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Gjdjxtm H Ijpfx Ah Esbw Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Gbjdpsxdn Nrsfx Ah Eew Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: $179,000 USD or best offer Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" Gbedpfx Asw Dvnxoh Eew MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Year of construction: 2017, condition: excellent (used), machine/vehicle number: #2T1-1001 , The SHD2400S Skiving & Roller Burnishing machine was used as a beta test machine from May 2017 through May 2019 and is available for sale at a discounted price. The machine is offered with a 3 year warranty at the time of installation. SHD2400S skiving and roller burnishing machine features: Maximum part length 2 m (6.56 ft.) Gbsdpsh Aywnjfx Ah Esw Spindle Power: 57 kW (76 hp) induction motor Diameter range 50-180 mm (2”-7”) 400 VAC/50 Hz or 460 VAC/60 Hz compatible Machine includes pressure head PH2460001 and SHD8200 Coolant system with filtration Dirty and clean tank capacity 1130 gallons each (2260 gallons total) Optional double wall tank for added leak protection

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Gbedpfx Ahsxvq Nrj Esw Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Gbjdpsxpywfefx Ah Ejw Application Types Injection Moulding

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 MACHINE DETAILS Gjdjxtmx Dopfx Ah Eobw Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg EQUIPMENT Iemca Elite 112 bar feeder

Condition: used, machine/vehicle number: YX9T30754HH02xxxx, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 14995 Specifications: - 3 axle Gbedpfx Aevg Rdnoh Esw - Turn on 1 - Lift on 2 - Tool cabinet - Okay tires - Air suspension - Frame (see pictures) - Service history - Delivery by agreement Description: Container trailer without container for sale. Is on service at Trucknor 2 times a year. Delivery by agreement. Technical approved: no EU-approved until: 04.07.2024 Own weight: 4550 Total Weight: 30000 Payload: 25450 Width: 255 Length: 1015

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Gbodjxvqilspfx Ah Eew Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Gbsdoxpytgjpfx Ah Eew Turning

Condition: used, Year of construction: 2018, machine/vehicle number: it221xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 20760 Gbsdpfowvzt Rox Ah Ejw Specifications: - 2018 model - 8400 kg - Will be annually inspected before sale - Replaced support legs - 10 kW - 6 scissors - Lifting height of 19 m - Platform length: 3.9 m - Ready for delivery Description: We have a 2018 Imer IT17220 Electric scissor lift. This is an electric self-propelled scissor lift with a working height of 19 meters and a platform length of 3.9 meters. It is designed for both indoor and outdoor use, and is ideal for construction projects, maintenance and warehouse work that requires height and stability. Works as it should. Ready for delivery

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Tool taper IMS 76 Number of axis 3 Gbedpfsxpyqxox Ah Eow Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2004, operating hours: 20,000 h, Chassis type: rigid Please contact ATS Norway for more information Please provide reference number upon request: 21769 Specifications: 2004 model Hours: 15900 Weight: 43500 kg 559 kW Tires (see pictures) Transmission: automatic Total weight: 108,500 kg Central lubrication Retarder 4x4 Gbodexvlg Sspfx Ah Eew 60 km/h Overhauled gearbox Replaced front left/right brake disc New water pump Overhauled front brake caliper New disc brake Replaced rear brake pads The rear discs are in good condition. Services provided by owner Light Air conditioning/ac Camera Videos Ready for delivery Description: We have a 2004 Perlini DP705 Tipper Truck for sale. A little has been done to the dump truck and everything works as it should, according to the owner. But there may be errors and omissions as it is from 2004. Has a large load capacity and moves large amounts of m3 in an efficient and reliable manner. Ready for delivery Hours: 20000 Own weight: 43500 Model: DP705 Tipptruck

Year of construction: 2015, condition: used, Serial number: b 201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21775 Description: We have a 2015 BFAB asphalt pavers w/ air-controlled canopy for sale. Everything works as it should, according to the owner. The tub itself has a volume of 15 m3. Ready for delivery Own weight: 1 Gbsdpfx Ahjxvldkj Ejw Model: BFAB asfaltbalje m/ luftstyrt kapell

Year of construction: 2015, condition: used, Serial number: b 2014xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21776 Description: We have a 2015 BFAB asphalt pavers w/ manual canopy for sale. Everything works as it should according to the owner. But there is cosmetic damage. (See pictures) The tub itself has a volume of 15 m3. Ready for delivery Gbodjxvlcmjpfx Ah Ejw Own weight: 1 Model: BFAB asfaltbalje m/ manuelt kapell

Condition: used, machine/vehicle number: W091403458PC0xxxx, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21330 Specifications: Gjdpfsxctgtjx Ah Esbw 2008 model 3 The axle L ft on 1 axle Tires (see pictures) Spring: air Ready for delivery   Description: We have a 2008 3 axle Carnehl tipper semi for sale. Ready for delivery Technical approved: Yes EU-approved until: 11.06.2026 Own weight: 11040 Model: 3 akslet tippsemi

Year of construction: 2023, condition: used, New: No Field of application: Construction CE mark: yes Serial number: sj2023-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21329 Gbsdpexctf Ajfx Ah Eew Description: We have a 2023 Yantai Hawk 350 wood cutter w/ s60 attachment for sale. It has not been used since it was purchased new by the owner. Everything works as it should. Ready for delivery Own weight: 1 CE: Yes Model: 350 trekutter m/ s60 feste

Condition: used, Year of construction: 2007, operating hours: 13,000 h, Serial number: kmtpc180t55k5xxxx Please contact ATS Norway for more information Gbsdpfxsxvlf Is Ah Eew Please provide reference number upon request: 21768 Specifications: 2007 model Approximately 13,000 hours Weight: 22260 kg 110 kW Machine width: 299 cm S70 attachment Auxiliary hydraulics New chassis (approx. 300 hours) Dental tray Services provided by owner Chassis (see pictures) Central lubrication Light Climate Radio Ready for delivery     Description: We have a 2007 Komatsu pc210lc-8 excavator w/ toothed bucket for sale. The machine functions as it should according to the owner. However, errors and defects may occur as it is from 2007. The chassis on the machine was replaced about 300 hours ago, according to the owner. Ready for delivery Hours: 13000 Own weight: 22260 Model: pc210lc-8 gravemaskin m/ tannskuffe