Used Salt Shaker for sale (377)

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Lhedezazm Ropfx Akqsn Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release Lhedpoxv A Nqefx Akqen The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Ljdpsya H Uyjfx Akqshn

Condition: good (used), Year of construction: 2007, For sale: salt spreader, feed conveyor, etc. Lhsdpfxez Sk Exe Akqen

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. Ljdpszmcqiefx Akqjhn If you have any questions, please feel free to write to us.

Year of construction: 2014, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: VR100-50, Distributor designed for spreading confectionery sprinkles onto an underlying conveyor belt. Spreading width: 1000mm, underlying belt speed: 4.5m/min. Capacity: 75kg/h, discharge weight: 0.7kg/l, volume approximately 150L. Layer thickness can be adjusted using a slide. Made of stainless steel 304. Lhjdj Aa I Abepfx Akqen See specifications for details.

Condition: ready for operation (used), power: 5.5 kW (7.48 HP), color: green, - Length: 15 m - Height: 1,27 m - Shaker channel: 650 x 200 mm Lodpfo Aa A Ufjx Akqshn - Motor: 5,5 KW

Condition: used, mileage: 999 km, first registration: 01/2000, Salt shaker control panels: - Acometis Lhjdpfxsqxuddo Akqsn - 24V - Price per piece You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, mileage: 999 km, first registration: 01/2000, Salt shaker control panels: - Mecagil Lebon - Price per piece You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Lhjdpfxeqxudas Akqjn Errors and typing errors possible, subject to prior sale!

Year of construction: 2009, condition: used, functionality: fully functional, For sale is a Thermo Scientific iEMS Incubator/Shaker (Type 1410), ideal for ELISA applications and other microplate-based assays. Condition: Function-tested, heats and shakes flawlessly, incl. 9 original microplate holders. Lhodjzyahropfx Akqon • Capacity: Up to 9 x 96-well microplates (3 levels with 3 slots each) • Temperature range: Programmable from 14 °C to 40 °C, controlled incubation range: ambient +3 °C to 40 °C (resolution 0.1 °C, accuracy ±0.3 °C) • Shaker: Orbital shaker with variable speed (400–1400 rpm in 250-step increments), programmable up to 48 hours • Dimensions: 400 x 400 x 450 mm • Weight: approx. 30 kg • Ideal for: ELISA, assays, diagnostic labs, research, routine lab work The unit was regularly serviced in laboratory operation, shows only minor signs of use, and is technically in very good condition. Shipping or pickup by arrangement; please inquire for international shipping. Feel free to get in touch with any interest or questions!

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Lhsdpszrtyljfx Akqsn Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, LDS LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Type: Air-Cooled Vibrator Lsdpfey Uigcjx Akqshn Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2005, functionality: fully functional, Gas-heated salt bath oven Maximum temperature 1200 °C Power: 180KW Gas heating Lsdpfx Asu S Ictjkqshn You are welcome to come by for a viewing by appointment.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Lhedpezpx Ucofx Akqjn Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Universal Shaker accessories / adapter plates / expander plates Universal accessory kit for electrodynamic shaker test systems Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing. For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench. The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories. Technical data: Manufacturer: unknown Type: accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components: 1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg 2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg 1 adapter plate, approx. 770 × 770 mm – approx. 35 kg 1 adapter plate with circular cutouts – approx. 25 kg 1 round adapter plate – approx. 20 kg 1 clamping rail / linear adapter – approx. 25 kg 1 precision adapter block – approx. 3.06 kg 1 steel adapter plate – approx. 2.18 kg Other adapter and fastening parts as shown in the pictures Features: Solid aluminum adapter plates Reinforced expander plate with central mounting Precision-engineered hole and thread patterns High stiffness for dynamic loads Adapter plates of various sizes and weights Round adapter plate Lhodszp D Tkopfx Akqen Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Application areas: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special constructions Scope of delivery: Complete accessory kit as shown in the pictures 1 expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Weight: 400 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear, scratches, and pressure marks are present. Some minor edge damage and signs of wear from test operation. Only the accessories shown in the pictures are for sale. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Ledpfx Aex Ig Tmokqjhn Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control Lsdpfxsz Dhl Rs Akqohn * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Lsdpfxjz Iqigj Akqshn Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: used, Universal Shaker Accessories / Clamping Devices Universal Shaker Accessory Kit Precision clamping devices, angle adapters, adapter elements, and holding devices for vibration test benches, vibration tests, and special designs For sale is a used accessory kit for an electrodynamic shaker or vibration test bench. The kit consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, holding elements, precision chucks, and other accessories for vibration tests. Ideal for test specimen mounting, special designs, and customized test setups. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test bench Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Components: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Holding and fastening elements Other accessories as shown in the pictures Ledpjzpya Hefx Akqjhn Features: Solid aluminum construction Precision-engineered components Threaded holes and clearance holes Universally applicable Clamping devices Angle adapters Adapter elements Clamping blocks Accessories as shown in the pictures Applications: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special designs Scope of delivery: Complete accessory kit as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Other accessories as shown in the pictures Weight: 600 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present. Only the accessories shown in the photos are being sold. The table shown in the photos, and any other items not explicitly mentioned, are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Ledoz Iqh Aopfx Akqshn Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2011, condition: ready for operation (used), The Thermo Max Q 6000 Incubator Shaker is a stackable, generously sized incubator, with orbital shaking. Designed to promote cell growth by providing a controlled environment with continuous agitation, the Max Q 6000 ensures proper oxygenation and prevents cell settling. Features of the Max Q 6000 include a temperature range of between 10°C – 80°C, and a speed range of between 15 – 500 rpm. Three bright LED screens display speed, time and temperature, and the control panel is user friendly with a simple design. Operation can be run in continuous or timed modes, from 0.1 hour to 999 hours, or 0.1 minute to 999 minutes. Furthermore, up to 25 x 250 ml flasks can be accommodated, with 2 x height adjustable shelves and a lower platform. For safety, the Max Q 6000 has an over-temperature feature and an interlock which stops the shaking motion when the door is open. Lhodez Etl Sopfx Akqon Inner chamber dimensions for the Max Q 6000 are 55.9 x 53.3 x 68.6 cm. Externally, the Max Q 6000 is powder coated with cold-rolled steel construction, and measures 83.8 x 69.8 x 102.8 cm. Key Features of the Thermo Max Q 6000 Incubator Shaker Stackable RS232 Interface Solid State Brushless DC Motor Capacity: 25 x 250 ml Flasks Operation: Continuous Or Timed LED Displays: Temperature/Time/Speed 2 x Adjustable Height Shelves Temperature Range: 10°C – 80°C Speed Range: 15 – 500 rpm (unstacked) 15 – 300 rpm (stacked) Max Load: 9.1 kg (shelf) 15.9 kg (platform) Platform Dimensions: 45.7 x 45.7 cm Inner Chamber Dimensions (L x W x H): 55.9 x 53.3 x 68.6 cm External Dimensions (L x W x H): 83.8 x 69.8 x 102.8 cm Good working condition. Please check out our other listings as well.

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Lsdpfxjz Spt Hs Akqjhn Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Lodpj Aa Duyefx Akqehn Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, gusset forming unit, film sealing unit, servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, roller perforating unit, technological platform, control cabinet, feed hopper. The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Condition: like new (used), This paint shaker is brand new, taken from storage and never used. Ljdpozvf Aysfx Akqohn Includes user manual.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Lodpfxezzzpgs Akqshn Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.