Used Sam Ag Hilfe for sale (6,622)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Kedsynhwrjpfx Airjdn

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand Kjdpfsr I Am Hjx Airodn NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. Kdedpor Ix Igofx Airsn The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). Kdsdpfx Aiegtmv Sjrjn The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter.

Condition: used, icht 60 kg Ksdpfxjxyturs Airodn Min. Gewicht 0,4 kg

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Kjdpfxjlvu Rue Airodn

Condition: ready for operation (used), Weight: 2.2t, including documentation. Kdedpomqly Uofx Airen

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Ksdpel Ax Tvsfx Airjdn

Year of construction: 1993, condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Kdedpfx Aspcgy Heirjn

Year of construction: 2021, condition: ready for operation (used), Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. Kdodpfop Ecguex Airsn

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Kodoqi D S Ujpfx Airjdn

Condition: new, Year of construction: 2025, functionality: fully functional, GMF Caliper Complete Set 2,500 mm, 3,000 mm, or 4,000 mm 1.) Base length: 1,500 mm or 2,000 mm 2.) Plus extension: 1,000 mm, 1,500 mm, or 2,000 mm Includes charger and receiver. The robust aluminum measuring rail is ideal for measuring glazing beads. Kedpfx Aioxu Hyqerodn Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly extended mechanically up to a measuring length of 4,000 mm. - Automatic detection of extension Accuracy: ± 0.1 mm Resolution: 0.02 mm Measurement transmission via wireless interface to control unit or PC Microcontroller charger for battery pack, 100-240 V input voltage, and power adapter for Euro/UK/US/AUS NOTE: 1.) HECHT receiver software required on the customer's PC – available separately upon request. 2.) Can be retrofitted to HECHT Exenso Comfort length stops from year of manufacture 2016 onwards – available separately upon request. 3.) Can be retrofitted to HECHT DS350 double miter saws from year of manufacture 2018 onwards – available separately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Kodpew Exaajfx Airjdn Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Customizable interfaces and software extensions possible. Kdjdpfx Aijxmh Uyjron Contact us!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled Ksdpfjxft I Ajx Airsdn - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,500 mm, measuring range Y-axis: 100 mm, measuring range Z-axis: 65 mm, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeat accuracy X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeat accuracy Z +/- 0.02 mm Resolution 0.01 mm Measurement capabilities: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness Kjdpfxjw Ew Dqo Airjdn ⦁ Parallelism ⦁ X/Y hole positions ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rebating position ⦁ Rebating depth (relative) ⦁ X/Y/Z position of horizontal boreholes ⦁ Depth of horizontal boreholes (relative) Measuring program: 8-point measurement for rectangular parts (e.g. rectangle, parallelogram, or trapezoid) Process: 8 points of the workpiece are scanned (two points per edge at each corner) Result: Displays 2 x length (top, bottom), 2 x width (right, left), 4 x angles Report: When nominal values and tolerances are entered, an actual/target comparison is generated and deviations are displayed in tabular form. Results can be saved as PDF (report) or in an SQL database for statistical analysis. Inspection and documentation of manufacturing status possible during the production process: after cutting, after edge-banding, or after drilling, depending on value creation. Vacuum system (Venturi principle): 6 vacuum suction cups integrated in the measuring field secure the workpiece during measurement. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power supply: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/control: 15" touchscreen HECHT DesQ II software Windows 10

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01/40360/1117, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture: 2017) – Subject to prior sale - Operating system: Windows 10 For measuring external dimensions and one-sided inspection of vertical and horizontal boreholes in panel-type workpieces. APPLICATION AREA: Setup assistance: Measurement of first-off sample parts Random inspection: Measurement of sample pieces MEASUREMENT CRITERIA: Dimensions: Length, width, angles Borehole, vertical: Position, diameter, depth, borehole distances Borehole, horizontal: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or inserted dowels are required) Groove: Edge distance, width, depth Radius: Center position, radius Rebate: Width, depth Cutouts: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm Kdodpfx Aew Ev N Ssiron (Note: Measurement of vertical and/or horizontal boreholes as well as grooves and rebates on the Y-axis is possible up to 1,150 mm position) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy – independent of daylight) Measuring surface: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor level: approx. 1,000 mm +/- 50 mm Required space (L/W/H): approx. 5,000 mm/ 2,000 mm/ 1,700 mm Weight approx.: 2,400 kg + control cabinet including operator panel approx. 200 kg Total electrical connected load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: For higher temperatures, a climate control unit in the control cabinet is recommended – available as an option.) Technical changes reserved. The above performance data assume suitable workpieces are used. Scope of delivery: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x CAD4U software license and HECHT interface for measurement program creation on a PC in work preparation ⦁ 19” PC with CAD4U software license and interface for measurement program creation, current software version Results and Driver for program execution, image processing software ⦁ Camera, lens, and lighting for image capture ⦁ Operating system: Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring lateral boreholes: 10 pcs each with a diameter of 5, 6, 8 mm ⦁ 4 x corner angles for black parts ⦁ SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages available on request. SAFETY AND PROTECTION DEVICES Emergency stop switch unit All machines for EU member countries with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be fully enclosed with a safety fence. This and other safety devices are not included in the delivery.

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Kodpjxu Iaxefx Airodn Minimal installation effort required Freely configurable set values Switchable between absolute and relative measurement modes

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery Kedpfsx Tdyzex Airodn • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 676-039 6000 bottles/hour, 0.2l-1.0l bottles Kdsdpfx Asx N I R Nsiren Machine will be available in December 2026 6000 bottles/hour

Condition: used, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, The machine is hardly used and fully functional. Kjdpfeyfnd Hjx Airsdn

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Kedpfew E Rfbex Airsdn Weight: 1500 kg

Condition: used, material width max. 100 mm material thickness 0 - 3 mm feed length max. 120 mm material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW weight of the machine ca. t Kedpfotqm Dbex Airodn dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Planing width 220 mm 6 heads with universal .Controlled from a portable console .The machine has safety guards . Kedpfx Aijud Raxjrodn

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Kdjdpfxsvtpk Hs Airon head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg