Spindle moulder

Samco T 50

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Iiedpfovz Eqxsx Ahpjd Total power requirement 2,2 kw

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls Iiedeh Nvyzopfx Ahpsd -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, empty load weight: 250 kg, maximum load weight: 500 kg, overall weight: 750 kg, loading space length: 2,060 mm, loading space width: 1,500 mm, loading space height: 1,300 mm, Kart trailer from trailer manufacturer VEZEKO model KART-2. Two karts can be easily loaded with this cover trailer. One kart stands on the floor and the other on the bracket on the walls. Standard features of the kart cover trailer include a wall bracket for the second kart, lockable cover, double-wing rear door, front wheel, sturdy galvanized frame and a sturdy tubular drawbar. We also offer kart trailers as box trailers. We also offer trailer accessories such as lashing straps, storage box, wheel lock and lock. Isdpfsui Nu Hox Ahpeid

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power: 4 kW Table size: 800 x 800 mm Spindle diameter: 30 mm Dust extraction port: 120 mm Handwheel for height adjustment Adjustable stop blocks Right/left rotation Spindle speeds: 3/4/6/9000 rpm No brake Iodeiw D Uhspfx Ahpjid

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Isdpfx Ahow Nx A Iopoid Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method. Iedpfx Ahjw A Hvdjpoid

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, Equipment: CE marking, documentation/manual, saw blade guard, Screen control; parallel fence; storage for 20 programs; double roller carriage 3000 mm; cutting width 1000 mm; cutting height 200 mm; table extension 840 mm; three selectable speeds: 3, 4, 5 rpm. Iodpoy Nyuasfx Ahpoid

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Iodpfx Asvxlq Hohpeid Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg Iisdpfxeh N Thwe Ahpod

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW Iiodocl Svvjpfx Ahpsd -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg