Used Sanding Line for sale (16,971)

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Nlodpfx Aoihf Tpsgzek Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Used olive oil production line with output capacity of 7 tons/hour. The equipment was made by Pieralisi in 2004 and is currently still in operation. Major equipment includes: Nlsdpfx Aex Nim Segzok - Leaf remover - Olive washing machine - Olive crusher - 700 litre Malaxer Panorama - 1000 litre Malaxer Panorama - Electric panels - Decanter centrifuge Elephant S 470/2 - Vibrator filter for Elephant S 470/2 - Decanter centrifuge Jumbo 2 - Decanter centrifuge Major 3 - Vibrator filter for Major 3 - Separator 1500-2000 Full equipment list on request.

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17924 Nlsdpfjvg Nr Dox Agzsk Specifications: 2014 model Hours: Approximately 11,000 Weight: 25,500 kg Power: 141 kW Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sanding machine Condition: function-tested – Working width 1300 mm – Cross sanding unit with belt air-jet cleaning device – Longitudinal sanding unit with steplessly adjustable speed and belt air-jet cleaning device – Calibrating roller, controllable via control panel – Vacuum conveyor belt – feed speed steplessly adjustable – Satin finishing roller – Brush roller – Machine settings and pressure regulation system CNC-controlled - EA dedusting unit, high-pressure air-blast installation with rotating nozzles and ionization for statically charged dust Location: ex customer site - Immediately available - Nljdpfx Agex N A Aaozek Machine must be dismantled by the customer

Year of construction: 2025, condition: new, functionality: fully functional, total length: 780 mm, total width: 720 mm, total height: 1,730 mm, input voltage: 400 V, warranty duration: 12 months, machine/vehicle number: 2025, Dishwasher pot washer Model: R-Line 1700 Quick-ready system Universal dishwasher 3 liters of fresh water consumption Easy washing programs (2 to 12 min) Nedpfx Agefgvv Hszjlk Rinse aid and detergent dosing pump Basket size: 560 x630 x 650 mm, WxDx insertion height DGUV V3 checked Drain / drain pump Connection: 400 V, 7.4 kW, 32A-CEE plug Dimensions: 720 x 780 x 1730 mm, WxDxH with warranty Included accessories: 1 universal basket Inlet and outlet hoses

Condition: used, Valve slide production: 2 Lidköping centerless grinding machines: Type 46/G and Type 4B/G 1 1 Knoll HF1000/6000 coolant treatment system * Nledpfx Agsw Sw Rcozek

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Nlsdpfx Ajihf Twogzsk Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Sale includes ancillary equipment as described in equipment list below. The line was designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 Nlodex Nimfspfx Agzsk - Rotating table RT Ancillary equipment includes: - (2) Fedegari FOF4/9 autoclaves - Veolia Waters Orion 6000 E WPU production unit - Steris Finn Aqua Pure steam generator - Steris Finn Aqua multiple effect water still - Atlas Copco ZT37VSD WP air compressor - WFI 15,000 litre storage tank - WPU 6000 litre storage tank - Main control cabinet - (2) Certuss steam generators - (2) Permak economiser and pump - Distribution system instruments (WPU, WFI, distribution system instruments, pipes, valves, pumps, etc.) - Clean room panels and ceilings - Daikin chiller Full design specifications available.

Condition: reconditioned (used), No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available. Nledpfx Aeh Eydbogzek

Year of construction: 2005, condition: used, Technical details: total power requirement: 24,47 kW 1 Centrifugal Wheel Shot Blasting Machine WheelLaborator Group GmbH, Schlick HB10/12 ROTOJET HB 10/12-5.3-2 Year of manufacture: approx. 2005, Serial No.: 043 (Overhead conveyor shot blasting machine) W/h: approx. 44760.82, with infeed and outfeed conveyor chain, shot blasting rods, control cabinet Nljdjxyk Atspfx Agzok *

Condition: used, Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a design temperature of 0 to 100 deg.c. Unit is belt driven by 37kw motor. Unit is mounted on a mild steel stand. Nledpfxsx Hv I Rs Agzsk Click on the link below to see a video of the machine running.

Condition: reconditioned (used), stock-No. 2452 Nljdpfxsi Dtb Uj Agzsk 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Nlsdpfjx Ag Azex Agzek Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging Nljdpfx Agox Hv Spjzjk - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Nljdpfx Aod Sg Hrogzok Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Nodsx Ag Epjpfx Agzjlk Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, Nlsdpfxsgbdrqo Agzsk output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k Nedpfsh Eyd Asx Agzolk 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), functionality: fully functional, No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: Nlsdpetvfhcefx Agzsk 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 2017, condition: used, screw size 30 mm Capacity 1000 kg/h Drive 240 kW Nlsdpsb Niqhsfx Agzek L/D

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) Njdpfx Agjd Sg I Iozjlk OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Nljdjgbffvopfx Agzek Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Njdpfjh Eydmox Agzelk Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Nljdpfx Agjh Eyd Rszsk Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Nedpfx Agsiyy I Nozelk Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.