Used Sanding Line for sale (11,714)

Condition: used, Year of construction: 1998, machine/vehicle number: 610082, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 Laedpfxezubpae Ah Sof - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW Lodoxtakmspfx Ah Ssaf - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Lsdpfsy Icpqsx Ah Sjaf

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. Ledjw Imp Hopfx Ah Sjaf The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, machine/vehicle number: 008686, Position 1: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 2: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 3: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 4: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 5: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 6: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 7: Roller Conveyors KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 8: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 9: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 10: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 11: Vertical Storage Systems KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 12: Panel Stacking and Offloading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 13: Cardboard Closing Stations KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Laodezk Uxgepfx Ah Sef Position 14: Robot KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 15: Strapping machine KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 16: Spiral Wrappers KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Laodpoqy Em Nsfx Ah Sjf Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Laodpfxjw Idbyj Ah Sjf Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Ledpfxsyk E Sro Ah Soaf

Condition: used, Year of construction: 2009, operating hours: 19,648 h, machine/vehicle number: LC666, Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-style carton formats.Advanced Automation & Control SystemsThe line is composed of dedicated processing and packing modules that support a sequential production workflow. The filling machine is specified at 100V, while the cardboard packer is specified at 400V. The accumulator provides a buffer between operations, helping to maintain material flow when downstream equipment requires short interruptions or adjustment time.The straw applicator performs a dedicated packaging operation after filling, supporting a practical carton presentation for end users. Electrical connection and control-system integration should be evaluated during installation to ensure correct synchronization between the individual modules.Production Line Integration CapabilitiesThis used bottling line is arranged as a carton filling and industrial packaging system for the 250 Prisma format. The equipment sequence supports filling, straw application, product accumulation and cardboard packing. The included paper trolley is intended for handling paper reels associated with carton production operations.Machine typeModelYearFilling MachineA3 CF2009Various Equipment - Accumulation SystemACHX302010Various Equipment - Straw ApplicatorSA302012Case PackerCBP322010Various Equipment - Paper Reel TrolleyThe modular layout allows the line to be assessed for integration with upstream product p... Ledpfx Aszvl Uish Ssaf

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table Laedpfx Ahozu Rw Tj Ssf Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). Ledjzvrfbjpfx Ah Seaf 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Output capacity – up to 500 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Ljdpfx Ahszug Dpe Sjaf Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: used, Grecon Dimter Opticut 704 Optimizing Saw An optimizing saw for demanding applications. A continuous chain transport system with a flexible upper clamping device, from the measuring station to the saw, ensures safe transport of wood that is tapering, twisted, heavily rough after sanding, and prone to splitting. A servomotor with a planetary gearbox provides very high acceleration due to its low moment of inertia. Waste is blown to the side in the cutting area. Thanks to its special design with an aluminum casting and a pneumatically controlled saw swing, very short cutting times are possible. Laodpfx Aozvyk Sjh Sef The output is approximately 12,000–17,000 running meters per shift, with maximum cross-sections of the material being processed ranging from 100 × 100 mm to 30 × 250 mm.

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Laodpjzvgdljfx Ah Sef Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Laodpfx Ahswuuf Ds Ssf Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Ledpfswuz Rtox Ah Soaf Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), in very good condition, 100% functional. Lodpfei Eblaex Ah Ssaf

Condition: used, Year of construction: 2018, machine/vehicle number: LC655, Used COMAC can line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 barRequired CO₂ pressure: 6–8 barFilling monoblock: ISO 14-2 (14 isobaric valves, 2 seaming chucks)Depalletizer pallet sizes: 1,120 × 1,300 mm (standard), 1,120 × 1,420 mm (optional)Depalletizer discharge height: 3,370 mm; max pallet height 2,813 mmRinser tunnel length: 2,380 mm; ionized air with HEPA filtration (99.97% at 0.3 µm)Automation: Siemens PLCs and HMI across key stationsAdvanced Automation & Control SystemsThe line integrates modern automation with operator-friendly HMIs for streamlined control and repeatable changeovers. Electrical and pneumatic systems are built for beverage production reliability, enabling precise handling of carbonated products.Control architecture: Siemens PLC Logo 7/2 on depalletizer; Siemens S7-1200 PLC with Weintek 7" touch screen on the labeling machine; Siemens touch screen and PLC on the monoblockDrive technology: SEW 4 kW motor for seaming rotation; frequency converters on key drivesAutomated height adjustment: Brushless motorized recipe-based can size changes via HMISensors & inspection: Photoelectric/inductive lid presence, X-ray fill level (min/max), transparent label photocellSafety: Stainless steel guards with interlocks, wire-mesh fencing, emergency protections, IP55 stainless enclosure on the inkjet coderClean operation: Ionized air cleaning with HEPA filter; undercover CO₂ injection and bubble breaker; dummy cans for CIP (up to 80°C)Production Line Integration CapabilitiesDesigned as a coherent packaging machinery set, this used bottling line supports inline operation from depalletizing through filling, inspection, coding, labeling, and discharge. Format changes between 0.33L and 0.44L are rapid thanks to automated adjustments and dedicated change parts. Laedpfx Ahozmgcco Sef

Condition: used, Year of construction: 2023, gebraucht 2023 9676 prompt, Zwischenverkauf v Deutschland 13700 € 1 1250 mm 1.25 mm 1,25 mm bei 1 Messerpaar; 0.37 kW 36 m/min 70 mm 1900 mm 1600 mm 1000 mm 350 kg demo machine / mint condition - fixprice 3 pairs of blades Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Ledpfszvhgzox Ah Ssaf Decoiler

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Laodpfx Ajzb Dp Rjh Sjf Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. Laedjzb Dr Sopfx Ah Sjf BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm Lasdpfozkt Rzex Ah Sef - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA Ledpfx Aezuk Huoh Soaf - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm - Weight: 250kg ADVANTAGES – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: like new (used), ⚙️ Studer S30-1 CE ⚙️ 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: ↔️ Distance between centers: 1000 mm 📏 Height between centers: 175 mm 🇪🇺 CE marking 🔄 COMPLETE RETROFIT The guideways have been refurbished, bearings replaced, the installation and electrical cabinet have been renovated, a complete paint job has been performed, and the geometry has been adjusted to restore the machine's original precision. ✨ An alternative to purchasing a new machine: thanks to the complete retrofit, it offers a level of precision, reliability, and performance comparable to that of a new machine, with a considerably lower investment. 🧰 Wide range of accessories available. 📅 Delivery time: please inquire. Laedpfxjzu Iyfe Ah Sjf 🏷️ Project reference: OP25-007

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers! Ljdjvk D Alspfx Ah Ssaf