Used Sanding Line for sale (12,136)

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   Prodpoxgfr Nefx Adxjc - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  - Labeler incl. laser printer   - Collecting table  

Condition: excellent (used), Brochure: Horizon SPF 20a Prsdpfxewz Skqo Adxsc Trimmer: FC 20a

Condition: excellent (used), functionality: fully functional, Slicing line Schomaker brand Consisting of: 1. Feed belt Plastic belt Belt width: 90 mm Overall dimensions of the feed belt: 1800 mm x 850 mm x 1200 mm 2. Slicer Mesh belt Belt width: 250 mm Working width: 250 mm Overall dimensions of the slicer: 1120 mm x 1500 mm x 1700 mm 3. Output belt Mesh belt Belt width: 250 mm Overall dimensions of the output belt: 2800 mm x 550 mm x 1200 mm Podpfowatwiox Adxsrc

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing Pedpfx Ajwh U Avsdxerc - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Psdpfx Aex Eb Abodxsrc Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Psdpexvy Hgsfx Adxsrc Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off Prjdpfjyrty Tex Adxsc - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m Podeupxd Depfx Adxjrc air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, Podevm U Dljpfx Adxorc - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal Predpfx Aovptt Redxec - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Pedpfxsvtqacj Adxjrc Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected Prodpfx Ajiyytqsdxjc mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Prodeh T Dzqjpfx Adxsc Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Pjdpfxemqk Two Adxsrc

Condition: refurbished (used), RISCO + TOWNSEND ID.NO. 0941 Risco line with Townsend RT 74 Pjdpfxef T R Dze Adxorc Sausage line with very high capacity. In good condition taken directly from production.

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h Podpfsn Utt Hox Adxerc * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: good (used), Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Prjdpfx Aei Art Esdxec Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Pedpfx Adjqvmpfsxerc Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Prjdpfx Asz Hd Sfodxsc Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 Podjz Ngzijpfx Adxsrc - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Pjdpfoz N A Niex Adxerc Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Year of construction: 1982, condition: used, Sapim Door Panel Line (1982), Panel Dimension Min/Max Length 490/1730mm x 538mm Width, Cycle Time 13 Seconds, Dimension of Sheet Min/Max Length 550/1800mm x 538mm Width x 0.5mm Thickness Podpfx Aez I Sx Aedxjrc Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 1,500 mm, input voltage: 230 V, overall weight: 3,000 kg, input current: 32 A, Machines are as new. We have also one pizzabox printer from Sunthink printing 600mm you can get including packing line. Prsdjz E I Sgopfx Adxsc

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Prodpfx Ajz Ic Nfjdxoc Documentation: Available Video: On request

Year of construction: 2026, condition: new, functionality: fully functional, Automatic machine for large-scale production or as professional equipment. Automatic tilting system, with electric motorization Automatic Control Panel with TFT screen and PLC TECHNICAL FEATURES: Body made of AISI304 18/10 stainless steel. Bowl made of AISI304 18/10 stainless steel integrated into the body. Wheels to facilitate movement, 150 mm diameter. Adjustable legs. Pedpfxsww Uago Adxsrc High-power industrial burner controlled by a digital device and temperature probe. Suitable for indoor and outdoor use. Also available in Electric models. Machine with oil filtration system and pump Automatic basket tilting system Optional motorized stirrer for perfect frying of the product on all sides. TFT screen with safety probe and temperature probe. On the TFT touch screen, you can make recipes, filtration, data collection. Insulation with high-temperature thermal blanket SUPERWOLL, Density 128kg/m³, thickness 13mm. Except for chimneys. Smoke exhaust chimneys and