Used Saw Formatting for sale (7,907)

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, For sale: Pilous ARG 290 CF-NC Automat automatic bandsaw Czech-made, fully automatic NC bandsaw for series cutting. The cutting length and piece count are programmed on the control panel; feeding, clamping, and cutting operate hydraulically in an automatic cycle. Stepless blade speed control is achieved via a frequency inverter. General Manufacturer: Pilous (TMJ), Czech Republic Model: ARG 290 CF-NC Automat Control: Unitronics Vision 230 Technical data Cutting capacity at 90°: round [290 mm], flat [approx. 290 x 290 mm] Miter cutting: [stepless 90°–45°] Blade size: [2,910 or 3,110] x 27 x 0.9 mm Blade speed: [15–90 m/min], stepless Main motor: [2.2 kW], 400 V / 50 Hz Dsdpoz H Nc Aofx Ap Ieku Length setting: NC-controlled, 0.1 mm accuracy, multiple feed for long pieces Hydraulic clamping, saw bow movement, and material feed Coolant system Weight: 1,000 kg Equipment Blade cleaning brush Chip container Spare blade included

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: Dkedpjz Ig Nisfx Ap Iou - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.

Condition: refurbished (used), Used automatic hydraulic NC bandsaw FMB Jupiter. Dkodpfsz Hxwpex Ap Ieu Blade dimensions: 3180x27x0.9mm Cutting angle up to 60° Semi-automatic and automatic operating modes Cutting capacity at 0°: round 240mm, square 240mm, rectangle 300x200mm Blade speed: 20 to 100m/min (mechanical variator) Weight: 1150kg The bandsaw has been completely refurbished.

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Dksdpfxezhx A Ro Ap Iju Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, Raimann KS310 multi-blade saw with material handling system Dkodpfx Ajz Hi Swep Ieu Max. cutting width: 310 mm Max. feed width: 650 mm Max. cutting height with multi-blade equipment: without pressure plate 120 mm, with pressure plate 105 mm Min. cutting height: 10 mm Min. workpiece length: 450 mm Chain width: 340 mm Saw mandrel diameter: 65 mm Arbor diameter: 80 mm Diameter of circular saw blade: 250-360 mm Saw mandrel speed: 3900 rpm Feed speed, continuously variable: 4–45 m/min Main motor: 37 kW Outfeed table with side discharge and material return to the operator Technical documentation and CE certificate Dimensions: 640x370x180 cm (H)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Dodpfx Aez Hd Sfep Ieku Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, grinding wheel diameter: 30 mm, rotational speed (max.): 24,000 rpm, grinding spindle speed: 24,000 rpm, input voltage: 400 V, New saw blade grinding machine – chip breaker groove grinding machine (demonstration machine) Grinding range approx. 100-630 mm diameter Tooth pitch of saw blade max. approx. 20 mm Control: Siemens PLC with automatic end shut-off after the grinding process Grinding spindle: High-frequency spindle, 24,000 1/min. Power 800 watts! Cooling: Minimum quantity lubrication Bebeqpdi Rerqbnfboln Saw blade clamping: pneumatic Gearbox: running in an oil bath Adjustment of saw blade thickness: via a pre-tensioned ball screw drive with no play Grinding stroke: via heavy-duty linear roller guide Grinding speed continuously adjustable (minimum to maximum) Accessories: - 1 set of reducing rings 16x22, 25, 32, 40, 50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping and minimum quantity lubrication (very low air consumption) Djdpoz Ikp Hefx Ap Ieku

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Dedpfsz Il Evjx Ap Ijku Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Dkedpfoud At Rsx Ap Isu

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Dkodpfx Apsufgnzs Iou Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: good (used), Year of construction: 2009, Multrip saw for grooving foam/plywood/MDF/composite Maximum working width : 2500 mm Maximum cutting hight : 50 mm Infeed conveyer table with adjusteble speed Dodpoz Ii N Ejfx Ap Isku Has been used for cutting tracks in foam, for the inner core in windmill wings ( so the foam can bend in any angle ) Can be used to cut tracks/grooves in plywood/MDF/composite/simillar.

Condition: used, Year of construction: 2012, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Dkedpfx Apoy A Hkuo Iou Feed: manual Horizontal cut indicator: Scale Vertical cut indicator: Scale Saw blade diameter: 300 mm Tilting material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: excellent (used), REMA DCKLW Band Saw Dodpezz Ilzsfx Ap Ijku Manufacturer: REMA Model/Machine Type: DCKLW Year of Manufacture: 1984 Machine Category: Band Saw Location: Gorzów Wielkopolski Delivery Terms: SELF-COLLECTION Delivery Costs: Borne by the Customer Startup Type: To be agreed Description: Notes: MACHINE WITH HYDRAULIC SYSTEM, ACTIVATED BY A PEDAL. INDUSTRIAL, ARTICULATED BAND SAW WITH A CUTTING WIDTH OF 800 mm. Overhauled, 4 kW motor.

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm Dkedet Dxwaepfx Ap Isu max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: new, Hazar Makina HM625 Transfer Printing Machine Year of manufacture: 2021 Model: 600 Printing width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical power consumption per hour: 18 kW Heating system: Heating oil (uniform heat distribution) Machine control panel: 7-inch LCD PLC system Cooling system: Automatic Heater power: 30 kW Motor power: 2.2 kW Heating time: 70 minutes Sealing clamp and guide system: Automatic (pneumatically controlled linear slide) Cylinder temperature control: Automatic dual control of outer and inner surfaces Dkjdpfxjq Rd Rcj Ap Iou Printing speed: 3–7 meters per minute Felt: Nomex Item condition: Showroom model You can find more printers in other sizes – new and used – in our shop! International shipping available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, Heavy-duty, fully hydraulic CNC bandsaw machine for automatic and economical cutting of solid and profile materials. Key features: - Cutting range: round 410 mm or flat 410 x 410 mm Dodpfx Apszl Ulpo Ieku - Modern 2-axis CNC control - Bandsaw blade monitoring with automatic feed rate adjustment - Inching function for the first cut, 15 mm min. remaining piece length - Stepless, frequency-controlled saw drive - Clamping pressure adjustment for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided bandsaw blade lifting device - Hydraulic bandsaw blade tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: plating gray RAL 7036 and turquoise RAL 5018 Includes 1 bi-metal bandsaw blade 6150 x 41 x 1.3 mm

Condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, overall weight: 1,100 kg, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, pressure (min.): 6 bar, pressure (max.): 10 bar, section length (max.): 5,300 mm, The STRIEBIG STANDARD TRK 1 6224 is a precise and robust vertical panel saw for professional use. It is ideally suited for cutting wood, plastic, and composite panels. Thanks to its sturdy construction and optional digital measuring systems, it enables efficient and accurate work. The machine offered here is a used machine with only a few operating hours and is in like-new condition. Dedpfxozmh E Se Ap Ioku Special equipment: Digital measuring system DMS – X-axis Digital measuring system DMS – Y-axis Paper holder Small parts support, aluminum Includes delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: new, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting Dkjdpfou Nhbyox Ap Isu - Wall or free-standing installation possible - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Condition: excellent (used), Year of construction: 2014, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilting drilling Dsdpfx Apovdb Tbo Ioku RWH drilling Sawing Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals between PC and PLC 1. Data handling is performed exclusively by the PC. 2. The clamping system sends a transmission release (VB.SendRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake signal (VB.DataSent) when the data has been transmitted. 4. Then, the VB.SendRelease and VB.DataSent signals are deactivated by the clamping system. 5. This procedure is initiated again for each new component. More new and used items can be found in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 7 Thin sheet loading: yes Dkjdjvrrldopfx Ap Iou

Condition: used, Roller support for saw, composed of: Djdpfsz I Dg Eox Ap Isku 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Year of construction: 2008, condition: good (used), machine/vehicle number: 0733337043, Offer 26310 Dkodpfxez Iyz Ej Ap Iju Technical data: - Saw blade diameter 380 mm - Miter adjustment 45° - 90° - 45° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Outfeed roller conveyor with stop, adjustable via handwheel + digital display 3000 mm - Infeed roller conveyor 6000 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, V = continuously variable, doors are safety-locked; belt guide rollers in very good condition, overhang 500 mm, emergency stop. Djdoz Ixymepfx Ap Ieku

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Dkjdpjyhdb Hofx Ap Iou Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: good (used), Altendorf WA8 sliding table saw Dodpfx Aoznw Dysp Ijku Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Good condition, fully functional.