Used Saw Sharpening Machine for sale (64,978)

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Hodpfx Agjfh R Tye Ioi Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Hsdpfx Agofibfae Isi Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hjdpfofibd Tjx Ag Iji Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Hjdpfefh R Tusx Ag Isi Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Hsdpfsfibfgox Ag Iji Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Hjdpfx Agspl D Hxo Iji

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Hedpfx Ageycqhcs Iji Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: used, Sharpening and sizing machine Oppliger Hodpfx Asdm I R Hsg Iei

Condition: excellent (used), Vollmer CANA S sharpening machine for circular saw blades Hjdpfx Agsdwbice Ioi

Condition: good (used), Vollmer CA 300 Hodpefbgvbefx Ag Ioi with support trestles complete

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Type: Semi-automatic band saw Hsdpfoychwnsx Ag Isi Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Condition: new, Year of construction: 2025, machine/vehicle number: MR006643, The best-selling Putsch-Meniconi! This machine is ideal for cutting commonly used sheet materials such as wood, plastic and sandwich panels. The machine is equipped with extraction on the main saw, a dust extraction hood for horizontal cutting, and the ECO rear wall extraction system for vertical cutting. Machine is fitted with the following options: - Rear support for small workpieces - Strip stop Hedpsx S U Sfofx Ag Ioi - ECO extraction system, channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 3200 mm - Maximum cutting height (horizontal): 1900 mm - Max. cutting height (vertical): 1700 mm - Maximum cutting depth: 60 mm - Maximum saw blade diameter: 250 mm - Saw blade speed: 5300 rpm - Motor power: 4 HP - Serial number: 25130034

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces Hedpfx Agjx S U I He Iji - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: new, Year of construction: 2022, machine/vehicle number: MR006645, This SVP420 is a very high-end vertical panel saw. It is a showroom machine with numerous options and an attractive price point. In addition to the standard Putsch features such as precision-ground guides, a rigid frame, and a cast aluminium saw unit, this machine offers additional extras. The machine is equipped with linear guides for the adjustment of the saw unit. It comes with an automatic adjustable stop for vertical cutting (POSI system). This unit is an ex-showroom machine from the manufacturer, allowing us to offer it at a very competitive price. High quality, with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Additional measuring rail with stop below the length stop - Strip measuring stop - Depth adjustment - Dust collection bin for horizontal cutting - Automatic length stop POSI system Technical specifications: - Maximum cutting length: 4200 mm - Maximum cutting height (horizontal): 2080 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 60 mm - Maximum saw blade diameter: 250 mm - Saw blade speed: 5300 rpm - Motor power: 5 HP - Serial number: 22420021 Hsdpfx Agsx S N U Ue Ioi

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise Hjdpfx Agjdynpco Isi -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: good (used), Year of construction: 2009, machine/vehicle number: 10014344, Offer 25481 Hsdpfx Agex Tqnfs Iei Technical Data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Maximum opening width of pneumatic vice: 205 mm - Cutting capacity with saw blade diameter 350 mm: - at 90° round: 120 mm - square: 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45° round: 100 mm - flat: 100 x 100 mm - Mitre adjustment: left up to 45°, right up to 45° and 30° - 2 saw blade rotational speeds: 17 and 34 rpm - Drive: 400 V / 1.4 / 1.9 kW - Air connection: 6 - 8 bar - Micro-spray coolant system - Space requirement approx.: W 850 x H 1750 x D 950 mm - Weight approx.: 400 kg

Condition: used, functionality: fully functional, Year of construction: 2021, SaeketaASP 631 F-WL(N) 800 for uniform sharpening of circular saw blades, with a pendulum head and four-axis control. Lakfam ASP-631 F sharpening machine. Hodpfx Aoyabvfeg Ioi

Condition: used, Year of construction: 1996, Used Machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Cross-cutting by scale at angle stop: 2800 mm Hedpfxoxrhh Rj Ag Iji Motor: 4 kW Speed: 4200 rpm Saw spindle: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodized version Tiltable up to 45° Digital display of tilt angle Prepared for scoring unit Mitre fence Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Hsdpfjyam Exjx Ag Iei Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Hodpfxex R U Eps Ag Isi Infinitely adjustable saw feed Very stable and heavy machine base

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Hjdpfxexc Uq Hs Ag Iei Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Hjdpfxswprmzj Ag Iji Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Hsdpfxsxvbvvo Ag Iei Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: excellent (used), 5.5 kW motor Hedpfxjw U Th As Ag Ioi Scoring unit Table length: 200 cm Ground clearance: 133 cm

Condition: excellent (used), Year of construction: 1977, Panel saw Hodpfswc Svpox Ag Isi Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Not tiltable