Used Sawdust Dryer for sale (1,841)

Year of construction: 2015, condition: excellent (used), For sale: a dust extraction system consisting of 2 silos and a mobile floor. Bwjdpfx Acozg Rarj Ajp

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal Article No.: 25019 Scrubber Dryer Bodpowq Nd Tsfx Ac Aewp Nilfisk BA 751 Serial No.: 3510172302 101 Year: approx. 2020 / 2021 (not visible) Only approx. 21.5 operating hours! The machine works perfectly and will continue to be used until sold. Therefore, additional operating hours may be added.

Condition: used, Year of construction: 2016, operating hours: 1,315 h, functionality: fully functional, working width: 850 mm, area performance: 15,000 m²/h, overall weight: 1,130 kg, tank capacity: 215 l, total height: 1,500 mm, total width: 870 mm, total length: 1,960 mm, water tank capacity: 200 l, battery voltage: 36 V, noise level: 69 dB, battery capacity: 390 Ah, rotational speed (min.): 180 rpm, rotational speed (max.): 180 rpm, brushing unit diameter: 430 mm, year of last overhaul: 2025, We offer this used Fimap MAGNA 85 ride-on scrubber-dryer, manufactured in 2016. ++++ ##Batteries were replaced in October 2025, 1x battery charger E230G 36/60 B25-FP FILON FUTUR L for 6 x 6-V / 390-Ah Discover AGM batteries ++++ Fimap ride-on scrubber-dryer, Magna 85 B, battery-powered scrubber-dryer with disc brush version. Bsdpfx Aey Ewpyoc Aewp The Fimap Magna 85 B is particularly suitable for maintenance and deep cleaning of areas up to 15,000 m². The Fimap Magna is equipped with an automatic front-wheel drive. Non-slip, non-marking wheels ensure safety even on wet surfaces. Technical data: Working width: 85 cm, Number of brushes: 2 Power supply: 36 V battery Tank volume: cleaning solution/dirty water tank: 200/215 L Noise level: 69 dB(A), vacuum: 190 mbar Brush speed: 180 rpm Accessories: 2x brush D.430 PPL 0.9 Black # 045000385 6x maintenance-free AGM block battery EVL16A-A 06-V / 335-Ah C5 / 390-Ah C20 ##Batteries were replaced in October 2025## 1x battery charger E230G 36/60 B25-FP FILON FUTUR L for 6 x 6-V / 390-Ah Discover AGM batteries Weight: 1,130 kg Dimensions (L x W x H): 1960 x 870 x 1500 mm

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Bodpfxjy Emqgj Ac Aswp Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator Bwsdpsu Nzxfofx Ac Aep *

Condition: excellent (used), Year of construction: 2022, Atlas Copco FX 300 Refrigeration Dryer Bjdpewhwubsfx Ac Aswp Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 18,00 m³/min

Condition: good (used), Year of construction: 2014, Almig ALM260 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 4,00 m³/min Bedpowhwlyofx Ac Aowp

Condition: good (used), Year of construction: 2011, FST DFX55 Bwjdpfowhwgqjx Ac Asp Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 9,17 m³/min

Condition: new, Year of construction: 2024, Atlas Copco FX 200 Bodpfx Aswhv Uysc Ajwp Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 12,00 m³/min

Condition: excellent (used), Year of construction: 2022, Atlas Copco FX 110 Refrigeration Dryer Bwedpfx Aswhu Ilec Asp Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 6,60 m³/min

Condition: excellent (used), Year of construction: 2023, Atlas Copco FX 5 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 0.36 m³/min Bsdpjwhlk Rofx Ac Ajwp

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block Bwjdpex Dihcofx Ac Asp - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug. Bedszdcdrspfx Ac Ajwp

Condition: used, Year of construction: 2014, machine/vehicle number: APF194822, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm Bodpozclgaofx Ac Aswp MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: used, Year of construction: 2007, 1) NYBORG-MAWENT WPT-40 Year of manufacture: 2007 Inlet and outlet diameter: 400 [mm] Engine power: 30 [kW] 2) Inlet and outlet diameter: 300 [mm] Bjdpfxszdb Ipj Ac Ajwp Engine power: 18.5 [kW] Spare impellers for fans!

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm Bwodpfodzqn Uox Ac Ajp + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 0.2 kW (0.27 HP), total length: 205 mm, total width: 280 mm, total height: 380 mm, overall weight: 11 kg, number of chambers: 1, Equipment: CE marking, Container volume: 6 L Maximum power consumption: 200 W Air consumption: 3 Nm3/h Bedszc Rcyopfx Ac Aswp Pressure range: 6-10 bar Total weight: 11 kg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Bodpoy Tiyajfx Ac Aswp

Condition: used, Technical specifications: Briquette diameter: 55 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 910 mm Tank capacity: 2.86 Output: 910 L Feed capacity: 400 L Motor power: 4 kW Safety switch Overall dimensions: Bwedpozd Erwsfx Ac Ajp Length: 1700 mm Width: 1100 mm Height: 1490 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Bsdpfszd Erdjx Ac Aswp Capacity: ~60 kg/h Power supply: 380V Motor power: 5.5 kW Safety switch Option to purchase the filter separately Filter dimensions: Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1500+1000+2400 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Bwodpfx Aezd Akkoc Ajp Length: 1670 mm Width: 1100 mm Height: 1500 mm

Year of construction: 2020, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: ACE 950 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2020. Textile oven almost new, overhauled and cleaned. Sold new for just over €15,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Ace 950 drying tunnel: - MAX POWER: 14 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 950 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Bwedpfx Acsr Rn Rve Aop Drying Area: 2000x950 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Bwsdpsyyb Nyjfx Ac Aep Structure materials: Aluminum Steel Rock/GLASS wool Control system: Fully customizable Remote control Number of fans: 4 Temperature range: 20-75°C

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Bsdpfxjx R D Efo Ac Ajwp Complete technical file

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Bodpfxoyw Thvj Ac Aswp Location: Rieth