Used Sbc 990 for sale (407)

Condition: excellent (used), Year of construction: 2019, BEHRINGER SLB 230 DG-HA band saw with infeed conveyor Year of manufacture: 2019 Gkedpozufutsfx Af Aja Cutting capacity at 90° (round) 240 mm Cutting capacity at 90° (flat) 310 x 200 mm Cutting capacity at 90° (flat) 270 x 240 mm Cutting capacity at 45° (right miter) (round) 175 mm Cutting capacity at 45° (right miter) (flat) 170 x 170 mm Cutting capacity at 45° (right miter) (upright) 155 x 240 mm Cutting capacity at 30° (right miter) (round) 110 mm Cutting capacity at 30° (right miter) (flat) 105 x 105 mm Cutting capacity at 30° (right miter) (upright) 100 x 140 mm Cutting capacity at 45° (left miter) (round) 150 mm Cutting capacity at 45° (left miter) (square) 135 x 135 mm Cutting capacity at 45° (left miter) (flat) 145 x 125 mm Cutting capacity at 45° (left miter) (upright) 65 x 240 mm Drive power 1.1 kW Cutting speed 16 - 120 m/min Saw blade dimensions 2,700 x 27 x 0.9 mm Length 1,600 mm Width 840 mm Height 1,900 mm Total weight 490 kg Material support height 990 mm

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Gkjdozug U Iepfx Af Aja Printing errors, errors and changes excepted, sample images. More details: !

Condition: new, empty load weight: 3,960 kg, maximum load weight: 10,440 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, + grid extension 1,000 mm high, loading height when loaded approx. 990 mm, 4 x tie-down points in the floor, each with a capacity of 5 tons, 8 x tie-down points in the floor, each with a capacity of 3 tons, reinforced gearbox support winch with load and fast-running gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm), load-bearing capacity per pair 10 tons, and 2 folding supports at the rear. Gksdozug U Uopfx Af Aja Price: 1,900 Euro. Printing errors, mistakes, and changes reserved. Sample images. More details at: !

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Gjdpfx Aszuhafef Aeka Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Printing errors, errors and changes excepted, sample images. More details: !

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Gkodsfmqq Espfx Af Aoa Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools Godpj E Dquofx Af Aoka to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, Year of construction: 2014, machine/vehicle number: A14 02 009-0040, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and Godpfxeztf Nhe Af Aska water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Gedpfx Afsxt Rc Hj Ajka Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW Gkedpfjx A Swdox Af Aea - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change Gsdpfx Afjxt Rddo Aeka • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Printing errors, errors and changes excepted, sample images. More details: ! Gkjdeztnrfepfx Af Aja

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net Gsdpedwktkofx Af Ajka - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Godpeb Ny Eyefx Af Ajka Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Colour: Grey Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm Gsdpfeyuxm Dox Af Ajka - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Gksdpfxeyak Dls Af Aea Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: used, Year of construction: 2024, load capacity: 10,000 kg, lifting height: 4,535 mm, total length: 7,400 mm, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt Gkedeztgdaopfx Af Asa · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: new, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 3-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each with a capacity of 5 tons, 8 x tie-down points in the floor, each with a capacity of 3 tons, reinforced gearbox support winch with load and fast-speed function at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm), load capacity per pair 10 tons, and 2 folding supports at the rear. Price: 1,900 euros. Errors, omissions and changes excepted. Sample images. More details at: [website address] Gksdpfx Afezrqg As Aea

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 119060 € 2250.23 € 1200 mm 730 mm 1.200 x 500 mm 1.200 x 500 mm max. 30 m/min 3.7 kW 27 kVA kW 4600 mm 3040 mm 2200 mm 6400 kg 990 mm 930 kg 1250 kg 405 x 50 x 127 mm 0,001 mm 500 - 2.000 U/min 11 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle on 6 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp Gkjdpfxewiq Hmo Af Aja machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: new, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side boards 600 mm high, galvanized, loading height approx. 990 mm, 4 x lashing points in the floor, each with a capacity of 5 tons, 8 x lashing points in the floor, each with a capacity of 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Gkjdszrdxropfx Af Aja Additional cost for: aluminum ramps (approx. 3,520 x 400 mm), load capacity per pair 10 tons and 2 folding supports at the rear. Price: 1,900 euros. Printing errors, errors and changes excepted, sample images. More details: !

Condition: good (used), Year of construction: 2015, lifting height: 14,350 mm, fuel type: diesel, Weights Empty weight: 3.350 kg Functional Lifting capacity: 200 kg Working height: 1.635 cm Dimensions of cargo space: 678 x 212 x 280 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 990 m Max swing of platform in degrees: 350 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: 160ALU Year of build: 2015 Condition: Used Gkodszp U Swspfx Af Aja Data: Max. working height: 16,35 m Max. platform height: 14,35 m Max. reach: 9,90 m Total dimensions LxWxH: 6,78 x 2,12 x 2,80 m Platform dimension WxD: 1,20 x 0,70 m Max. basket load: 200 kg Swivel range of the upper carriage: 350° Ground clearance: 0,20 m Support width vertical: 2,17 m Support length: 3,28 m Empty weight: 3.350 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, loading area with side panels, box body for material: 1.50 x 0.50 x 0.50 m. Information: Tüv and UVV new Location: 41468 Neuss immediately available

Condition: used, mileage: 403,500 km, power: 360 kW (489.46 HP), first registration: 10/2017, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,450 mm, total width: 2,550 mm, loading space length: 6,350 mm, loading space width: 2,540 mm, loading space height: 1,100 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, lane keeping assist, parking heater, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Refrigerator - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - PTO (Power Take-Off) - Rearview camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = HMF 5020 K6 Winch FJ 1000 Front stabilizer Scanreco radio remote control. 4.70 m - 9,270 kg. 6.40 m - 6,460 kg. 8.30 m - 4,780 kg. 10.30 m - 3,700 kg. 12.30 m - 3,000 kg. 14.40 m - 2,500 kg. 16.70 m - 2,150 kg. FJ1000 19.70 m - 1,100 kg. 21.30 m - 990 kg. 22.90 m - 900 kg. 24.70 m - 820 kg. 26.60 m - 700 kg. 28.50 m - 575 kg. Hydraulic rear bumper and table. 2 x hydraulic outrigger support. Loading box 635 cm + 120 cm extension. 110 cm loading height. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Tire size: 305/70R22.5; Dual tires; Tire tread depth left inner: 45%; Tire tread depth left outer: 45%; Tire tread depth right inner: 45%; Tire tread depth right outer: 45% Gkodpfoztxm Hex Af Asa Rear axle 2: Tire size: 305/70R22.5; Dual tires; Tire tread depth left inner: 45%; Tire tread depth left outer: 45%; Tire tread depth right inner: 45%; Tire tread depth right outer: 45% Rear axle 3: Tire size: 385/55R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 22,285 kg Payload: 14,715 kg GVW (Gross Vehicle Weight): 37,000 kg Functional Crane: HMF Financial Information Price: Upon request Identification Model number: G490 8x4*4 / HMF 5020 CRANE - KR = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Gkodovxf U Eepfx Af Aja Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Condition: used, empty load weight: 8,620 kg, maximum load weight: 36,380 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 13,550 mm, suspension: air, tire size: 445/45R19,5 160J, color: other, gearing type: other, front tire size: 445/45R19,5 160J, rear tire size: 445/45R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Low usage, loading height approx. 990 mm, 12 container locking devices, for 1 x 20 ft or 2 x 20 ft or 1 x 40 ft container. Surcharge for ramps: €1,000. -- Subject to printing errors, errors and changes. Sample images. More details: ! Gkedpfx Afjzqty Nj Aea

Condition: new, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 690 V, input frequency: 50 Hz, input current: 340 A, type of input current: three-phase, protection type (IP code): IP55, Siemens AC motor Type: 1LA8315-6PM80-Z Godoxg Iw Uepfx Af Aeka Construction: IM1001-B3 Standard: IEC60034-1 Duty class: S1 Input voltage: 400/690 V Input current: 340/169 A Rated power Pn: 190 kW RPM: 990 Power factor: 0.85 Frequency: 0.50 Hz

Condition: new, Year of construction: 2026, Working width: 530 mm Planing cylinder: Tersa Number of knives: 4 Jointer table length: 2300 mm Adjustable angle of the jointer fence: yes Raising of the jointer table: electric Maximum stock removal thickness (thickness planer): 250 mm Height adjustment of the thickness table: electric Display of the planing thickness: digital Feed rate: 5 / 7 / 9 / 12 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Gkodpfozqyw Ujx Af Aea Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Dust extraction connection: 140 mm Machine length: 2300 mm Machine width: 990 mm Weight: 750