Used Schneider Na for sale (188)

Condition: used, Year of construction: 2000, Pile lift Dcsdpeulhizofx Afnec Schneider Senator Profiline PLE O - H Year: 2000 Description - With steelplate

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Year of construction: 2019, No. 3243 Compressor & refrigeration dryer Schneider AM D 15-13 XVS & DK 7700 SMART Used, year of construction 2019, 6241 operating hours System in very good condition, comes from former carpentry business Package consisting of screw compressor, refrigeration dryer, compressed air tank, condensate drain, pre-filter, ultra-fine filter, oil-water separator and all existing pipes and connectors - Screw compressor Schneider AM D 15-13 XVS Compression end pressure 12.5 bar Working pressure 5 - 12.5 bar Volume flow 258 - 2214 l/min Motor power 15 kW - Refrigeration dryer Schneider DK 7700 SMART Dodsxc H Siepfx Afnecc Volume flow 7700 l/min Operating pressure 7 - 14 bar - Compressed air tank Schneider BH-VZ 2000-11 Pressure 11 bar Tank volume 2000 l - Condensate drain Schneider KAL-Ecomat 20000 - Pre-filter Schneider VF-DVP 80 - Ultra-fine filter Schneider FF-DFP 80 - Oil-water separator Schneider OWS-Öwamat 14 - All existing pipes and connectors Sale on behalf of the customer, ex location near 88662 Überlingen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm Djdpfobb Tgusx Afnscc electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Dcedpfx Aow Uc T Isfnsc Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum speed of ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit available under stock number 59700

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Dcsdpfx Aow Uc Tzofnsc Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Dedpfx Afjtwwm Uenocc

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Dcjdpsgf Ix Aofx Afnec Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59702

Condition: ready for operation (used), Max. load: 350kg, no known defects, without accessories, spare parts, or documentation, year of manufacture: approx. 2015. An on-site inspection is possible. Dcedpfx Afoxtprgonec

Condition: used, Year of construction: 1967, grinding length 1650 mm grinding width 700 mm workpiece height 600 mm table surface area 1500 x 500 mm table speeds 0 - 20 m/min cross feed autom. 0 - 20 mm/Hub grinding spindle speed 2000 U/min grinding wheel diameter 300 mm Dsdpfx Afott S Uajnjcc total power requirement 19 kW weight of the machine ca. 5 t dimensions of machine L x W x H 5,92 x 3,12 x 2,65 m Accessories: 2 magnetic plates, each 750 x 600 mm; grinding wheel with flange, various grinding wheels and flanges separate, wet grinding attachment

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 18.5 kW (25.15 HP), pressure (max.): 10 bar, Flow rate 2530 l/min Weight approx. 440 kg MARK MDX 3000 refrigeration dryer, built in 2007, 13 bar, capacity 3000 l/min. ÖWATEC 130 oil-water separator Dedpev U Ncxofx Afnecc 750 l vertical compressor tank, built in 2021

Condition: used, Year of construction: 2006, Offer in progress! Dcodpfxowftufj Afnec

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Dodpfx Aoxq Elwefnecc

Condition: used, functionality: unexamined, Clamping range: max. 240 mm Cutting height: max. 450 mm Cutting depth: max. 380 mm Motor power: 2.2 kW Dcodpfjw Npk Aox Afnec

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Dodpfxsxqp Nge Afnjcc

Condition: excellent (used), x: 3200mm y: 1500mm z: 1000 CNC FAGOR 8050 (7 axes) Dodpfswrx U Djx Afnscc

Condition: excellent (used), Year of construction: 2006, Double finisher 842 Multimatic with control unit year 09.2006, price € 20110 Wardrobe former and trouser topper rotatable on one column Finish drain in closed cabin integrated cabin exhaust automatically controlled doors close automatically flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory locations air volume regulation for particularly sensitive garments space-saving and virtually no stress in the work area due to finishing process externally steam-heated or fully electric with built-in electric steam generator Dodpfx Asgtiddsfnscc Are you looking for an all-rounder for jackets & co? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, coats, trousers and similar items can be finished automatically. It consists of a form finisher and a trouser topper. The two units are rotatably mounted on a column. For finishing, the previously loaded element (form finisher or topper) is swivelled into a cabin. The doors close automatically and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low-noise, small footprint. Year of construction: 09.2006 New price: 20.110 €. Unit runs perfectly Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2004, The SF-80 stands out particularly due to its large pre-stacking capacity of around 450 mm. The envelopes are pre-stacked upright and singulated by a special suction head. The transport occurs without deforming the material. Output conveyor Dcodpfxewv S N No Afnjc

Year of construction: 2003, condition: good (used), - Build in 2003 - Type of strapping: Einfach- & Doppelumreifung / single, double strapping - max speed for single strap: bis zu 35 Pakete/min / up to 35 bundles/min - max speed for parallel (double) strap: bis zu 17 Pakete/min / up to 35 bundles/min - min bundle (package) height: ~10 mm - max bundle (package) height: ~450 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: ~850 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: PP - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with auto. height detection - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~760 mm - Over all width equipment: ~1540 mm - Over all height equipment: ~1600 mm - Input Power: ~2 kVA - Voltage: 400 V 3Ph, 50/60 Hz - Air requirement: ~8l/cycle 6 bar - Weight: ~415 kg - Optional Equipment: Can be combined with a RO-TRI in-line strapper to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Dcedpfxsh I Dlle Afnsc - Mechanical / electrical machine test possible - Condition: cleaned & in working conditions - Machine available: upon request - Description: Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages.

Year of construction: 2006, condition: good (used), Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~20 kg Dodpeh Nuh Sefx Afnscc - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung 6 bar / ~8 l/cycle 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: new, - Type of strapping: single in travel direction - max speed for single strap: up to 30 bundles/min - min bundle dimensions (w x l): ~160 x 130 mm - max bundle dimensions (w x l): ~560 x 480 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: 800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: einfach / single - Strap coil dispenser - core width: 165-210 mm - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Over all length equipment: ~840 mm - Over all width equipment: ~1250 mm - Over all height equipment: ~1750 mm - Input Power: ~0,5 kVA - Voltage: 230 VAC, 1Ph, 50 Hz - Air requirement: 2 l/cycle 6 bar - Weight: ~335 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic in-line strapping in travel direction without bundle turning behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages. Dcedpfxeh Nulce Afnec

Condition: good (used), Year of construction: 2016, Consists of 2 machines 27078f Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Built in: 2016 Type of strapping: single in travel direction max speed for single strap: up to 30 bundles/min bundle dimensions (w x l): min ~160 x 130 mm, max ~560 x 480 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core width: 165-210 mm Equipment: hold-down device, interface to up-/downstream equipment, auto. strap feeding Over all length equipment: ~840 mm Over all width equipment: ~1250 mm Over all height equipment: ~1750 mm Input Power: ~0,5 kVA Voltage: 230 VAC, 1Ph, 50 Hz Air requirement: 2 l/cycle, 6 bar Weight: ~335 kg 27078g Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Built in: 2016 Type of strapping: single, double, multiple speed for single strap: up to 40 bundles/min speed for parallel (double) strap: up to 20 bundles/min bundle dimensions (w x l): min ~180 x 130 mm, max ~580 x 510 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 160/180/200 mm Equipment: back stop (package stop), hold-down device, interface to up-/downstream equipment Over all length equipment: ~615 mm Over all width equipment: ~1700 mm Djdpfxjk D Dvgs Afnocc Over all height equipment: ~1900 mm Input Power: ~1,1 kVA Voltage: 400 VAC, 3Ph, N, PE, 50 Hz Air requirement: 7 l/cycle, 6 bar Weight: ~500 kg

Year of construction: 2000, condition: used, Built in 2000 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Size packaged good width max 600 mm min 180 mm Size packaged good height max 350 mm min 10 mm Strap Polypropylenband width 5 mm Dcedpfxec Id Hxo Afnoc Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter ca.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 490 kg (approx.)

Year of construction: 2001, condition: used, Built in 2001 Capacity single straps up to 40 straps/min Dcedpfx Asc Ift Tsfnsc Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Size packaged good width single/parallel max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table

Condition: used, Rebuilt 2006 Cutting width 1.850 mm Feeding height max 165 mm Feeding depth max 1.850 mm Front table length 730 mm Table height 900 mm Equipment • air table Djdpoc Rdgbefx Afnjcc • program • cutting line indicator • 2 knives • pile lift PL 3 • jogger Vibro • Info: modern computer cut control