Used Scm T 160 for sale (603)

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Bsdpfjtwgirjx Aglocu Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: like new (used), Year of construction: 2000, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/bottom/uni spindles speed 6000 RPM two axes heads regulation pneumatic pressure of feeding rolls variable regulated feeder Bcjdpfx Ageqffa Nslju year 2000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. Bsdpexn Um Sefx Agljcu If customer wishes it can be seen working.

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Bsdpfx Asxqf Dyjgljcu Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm Bcodpfx Agsxztfyjlou electric height adjustment 7.5 kW motor star-delta start 380V power supply

Year of construction: 2016, condition: excellent (used), Thickness planer Manufacturer: SCM Type: S52 Elite S Year of construction: 2016 Working width: 520 mm Max. Plane thickness: 240 mm Power: 7 kW Feed rate: 5 / 8 /12 /18 m/min Number of knives: 4 Bcedpfx Aspr U D Seglju Blade type: Tersa Motor brake: Yes Suction nozzle: 120 mm

Condition: like new (used), SCM bottom spindle moulder Bcsdpfx Agjwt A Iqoleu Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor 4 spindle speeds Very good condition

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Worktop lubrication pump Headset Spindle speed 6000 rpm Spindle bore diameter 35 mm Bjdpfxovzr Drj Aglscu Weight 900 kg European CE certificate Technical documentation Very good condition

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm Bcodpsxxkt Aefx Agleu • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: excellent (used), SCM T130 Shaper (Spindle Moulder) Long tables with extension 4-roller power feed Spindle diameter 30 mm Motor 5.5 kW 5 spindle speeds Bcodpsxw U N Eefx Aglju Foot brake Forward/reverse rotation Machine condition: very good.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,900 mm, total height: 3,000 mm, total length: 5,000 mm, total width: 2,500 mm, table width: 1,400 mm, table height: 400 mm, table length: 1,800 mm, overall weight: 5,200 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 7,400 W, spindle nose: 4, number of spindles: 2, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CNC machine with two tables and one head, that carries 2 spindles with two spinning tools in each. 4 tools in total. The tables and work independently to maximise speed, or in synchrony and work as one long table (2900mm) Bcjdpfx Aoxyh Dhjglju There is 6 clamps in total, which can be fitted to your liking. The calmps can handle 100x100mm If working on two tables the part on each one can be 1400mm long. Also a removable vacuum table. with powerful vaccum pump. The machine is in working condition and is still operating at our factory. "TCAS" CAM Software comes with machine.

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors Bcedswwl Nlepfx Aglsu - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: AA2/004283, working width: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Planer block diameter: 120 mm Number of knives: 4 Electrical data Bcedpfowkq Ndox Aglju Voltage: 400 V Connected load: 10 kVA General information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available - CE marking present

Condition: excellent (used), CNC Woodworking Center. Bcsdpfx Ajwmxkheglju

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit Bedpfx Aswkf Ihsglecu - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: new, functionality: fully functional, COMPACT AND COMPLETE, in less than one square meter, "easy cart" offers everything you need to manage 3 different glue pots Bcodsqu N Efjpfx Aglsu QUICK PROCESSING CHANGEOVER, in a few minutes it is possible to replace the glue pot with a different one already heated by "easy cart", improving the efficiency of the edgebander STORAGE OF THE POLYURETHANE GLUE, at the end of the processing the glue pots are placed inside the container of the "easy cart". The innovative air drying system maintains 2 pots with polyurethane glue without problems for 72 hours at least

Condition: new, Year of construction: 2025, Spare parts for Scm edgebanding, squaring and edgebanding machines. GLUE TANKS AND COMPONENTS - NEW OR REVISED, BUSHES GLUE SPREADER ROLLERS, NEEDLE ROLLERS AND RUBBER ROLLERS, RESISTANCE AND PROBES, WHEELED WHEELS, PLATES AND CHAIN LINKS, CHAIN PINS, BELTS PRESS, CARDAN JOINTS, MOTORS, COMPLETE GROUPS Bcodpfx Aefiv Tnjglou

Condition: ready for operation (used), Technical characteristics Capacity : 220 x 120 mm (mini 25 x 6 mm) 2000 mm infeed table Feeding speed 5 to 20 m/min Table lubrication 4 tool holders : Lower planer : 5.5 HP Right-hand / left-hand spindle moulder : 7.5 HP Upper planer : 5.5 HP Shafts 40 mm bore Max. tool Ø 180 mm Power and Motors Bcedpfjt N Atvox Aglsu Voltage: 400 V Pluging: Three-phased Power: 15 Kw Overall dimensions Lenght: 3500 mm Width: 2000 mm Height: 1500 mm Weight: 1500 Kg

Condition: ready for operation (used), Technical characteristics Digital adjustment of shaft height and speed Spindle height and motorized fence HSK F80 tilting spindle Tilting -10° / +45 5.5kW motor Speed 3000, 4500, 6000, 7000 and 10000 rpm Shaft diameter: 50 mm Shaft length: 180 mm Bjdpfxjtvcz Aj Aglecu Maximum tool diameter : 320 mm Quick tool change (hydraulic) Table dimensions : 1200 x 730 mm Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1400 mm Width: 1150 mm Height: 1100 mm Weight: 900 Kg

Condition: ready for operation (used), Technical characteristics Calibration of 2 diamond tool holders Gluing with hot melt glue tray Automatic edge feeding Pressure group Tiltable end cutting Straight / chamfer / 1/4 round trimming Edge scrapers Brush Capacity : panel thickness 50 mm edge thickness roll 0.4 - 3 mm edge thickness strips 8 mm Bcsdettrp Sjpfx Agleu Feed 10m/min Power and Motors Overall dimensions Lenght: 3700 mm

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm 8 shafts Bcjdotyfiispfx Agleu Table 1500 mm Feed rate 6-36 m/min Composition : Horizontal lower 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Vertical left 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal lower 40 mm 7.5 kW Universal 40 mm 7.5 kW SUPERSET quick adjustment of tool diameters 2nd straight indexable spindle moulder Drive in the table + short wood Ideal for high finishing, joinery, planing and profiling of shutters, mouldings Power and Motors Pluging: Three-phased Overall dimensions Lenght: 6000 mm Width: 1200 mm Weight: 5200 Kg

Condition: good (used), max width of workpiece 230mm max workpiece height 130mm 6 spindles 1) Horizontal bottom 230mm 5.5kW 2) vertical right 130mm + 3) vertical left 130mm; (2nd and 3rd spindle) 11kW 4) horizontal top 230mm 7.5kW Bjdpsrqzvcefx Agljcu 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable 360° 7,5kW

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Bsdpfsh Nvt Uex Aglecu Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm RPM: 3000/4500/6000/8000/10000 obr./min Manual spindle height adjustment Spindle lock Work table dimensions: 350x1190 mm Culagi arms adjustable Bcjdpfsp T Un Sex Agleu Extraction spigot diameter: 115 mm Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1190 mm Width: 860 mm Height: 1600 mm

Condition: reconditioned (used), 3-AXIS DRILLING & MILLING CENTER WITH FIXED RIGHT-ANGLE HEAD, DUAL HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, reconditioned, without warranty) TECHNICAL SPECIFICATIONS: - Working area: Between lateral stops along X: 2650 mm Electro-spindle axis X travel: 2903 mm Electro-spindle axis Y travel: 1240 mm Vertical drilling bits Y travel: 1018 mm - Max. panel size for double-station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y axes vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) Bodjw E Hb Sjpfx Aglecu - Spindle rotation speed: 4,000 RPM - Spindle taper type: M 10 - Machine weight: approx. 2,800 kg COMPONENTS: WORK TABLE: 4 beams for support suction cups L=1000 mm for automatic round suction cups with aluminum bodies (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring VACUUM PUMP with a capacity of 100 m³/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic workpiece support device for tables L=1000 mm MILLING: HSK 63 electrospindle with increased power of 7.5 kW - Rotation speed 1,500/24,000 RPM controlled by inverter - Right and left rotation selectable via CNC - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools not included) Rear tool changer magazine with 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each toolholder seat supports up to 4.5 kg - Maximum total weight of tools and holders for magazine "R8L": 22 kg HORIZONTAL UNIT WITH 2 OUTPUTS for MILLING and GROOVING: - Rotation speed: 9,000/18,000 RPM - Motor power: 3 kW (4 HP) - Milling tool (front output) max. Ø 20 mm - Usable length of front milling tool: 110 mm - Milling tool (rear output) max. Ø 12 mm - Usable length of rear milling tool: 80 mm - Blade Ø 100 mm DRILLING: 12 independent spindles for vertical drilling (7 along X and 5 along Y) 3 independent heads, each with 2 spindles for horizontal drilling: * 2 heads along "X" (64 mm pitch) * 1 along "Y" INTEGRATED OPERATOR GROUP for FIXED disc cutter, for grooving along "X" - Disc cutter rotation speed: 4,000 RPM - Motor power: 2.2 kW - Disc cutter max. Ø 120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø 160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON microprocessor, 2 GHz - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, reconditioned, without warranty)