Used Screen Printing Cylinder for sale (16,613)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, For sale: 2 M&R Reno HW inter-operational dryers for textile printing. Price per unit: 1000 EUR. The units have been in operation in our facility since they were new and are in good working order. Ibedpfx Asxfkm Nscqsa We also have a variety of other equipment for textile printing available in other listings, including: an M&R Sprint M2000 gas-fired dryer, inter-operational dryers, 80 Newman-roller screen printing frames, a Trilock rapid registration system, and a screen printing copy frame, among other items.

Condition: used, functionality: fully functional, machine/vehicle number: 050526, input voltage: 230 V, overall weight: 40 kg, Hello, we are offering a nice, small Roku Print SD 05 for sale. Iedpfx Acjzll N Sjqoba The system is in top condition and has only been used very little for prototype production. This small system features a vacuum printing table. The height of the printing material can be adjusted using the small hand control unit. All the important parameters, such as printing speeds, flood speed, screen clamping, etc., can be easily entered via the hand control unit. In addition, the system is equipped with an adjustable printing table in the x and y directions, which can also be rotated. This is not a standard feature, but rather a special design with table adjustment. The system is a good alternative for those who need to print small parts and for whom Thieme and ATMA screen printing systems are too large. It is an ideal machine for "small parts printing". The machine requires a standard 230-volt connection and compressed air. If you are interested, we would be happy to demonstrate the system. Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage. Isdpfx Acszl Ennsqoba

Condition: used, Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, working width: 3,000 mm, table width: 1,600 mm, table length: 3,000 mm, Screen printing machine for sale, print size 1600x3000 mm, with a 1600 mm two-section Svecia heat dryer, exposure frame, aluminum frames, and glass. Suitable for printing on metal as well. 3/4 automatic. Iedpfxszlq N Rs Acqoba

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Ibjdpfx Acey A S Ryjqoa Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Iedpfsy Twkmsx Acqeba Raised Fully Cleaned

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total width: 3,730 mm, compressed air connection: 6.9 bar, year of last overhaul: 2026, overall weight: 1,656 kg, FOR SALE – AUTOMATIC M&R SCREEN PRINTING MACHINE - Diamondback S 10/8 (plus extras) *2 flashes + compressor* £18,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our automatic screen printing press for sale. This is a fully operational, professionally maintained machine that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually Ibedpfezb N Tnsx Acqoa • Fully operational Key Features: • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £18,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This is a bargain and a great addition to any new or established business. For sale as part of a complete setup with dryer in another listing

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,100 mm, total width: 1,270 mm, total height: 1,520 mm, overall weight: 1,112 kg, conveyor belt width: 910 mm, M&R Radicure 36/10 Dryer - Selling due to business closure £7,500 + VAT (ono) Located in Mid Wales, UK Excellent condition Dimensions & Power Specs Belt Width: 36 inches (91 cm). Chamber Length: 10 feet (305 cm). Infeed Extension: 5 feet (152 cm). Outfeed Extension: 5 feet (152 cm). Isdpfx Ajzb N Swocqeba Total Length: 20 feet (610 cm). Electrical Draw: 208/230 Volts. Phase Requirement: 3-phase electrical setup Sold separately or part of a package in another listing We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment. The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use.

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Ijdpjyu Tu Asfx Acqeba

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer for sale a professional manual screen printing press: M&R Chameleon, 10 colors / 4 stations, year of manufacture: 2007. This is a legendary model, recognized as the most precise and stable carousel press in the world. The machine is in very good technical and visual condition and is ready for immediate operation in a professional print shop. Key specifications and advantages: • Configuration: 10 colors / 4 stations (enables printing of very complex designs on a small area). • Duo-Deck™ system: Unique dual-level construction allowing operation of 10 colors while maintaining compact dimensions. • Side Clamps: Provide exceptional screen stability and eliminate vibration during printing. • Air Locks: Pneumatic locking system enabling quick and tool-free frame setup and replacement. Ibedpfx Acey E Ay Doqja • Micro-registration: Precise registration along three axes, maintaining accuracy even over very long runs. • Origin: M&R brand – guarantee of spare parts availability and service support. This press is perfectly suited for high-end quality printing, pattern creation (sampling) for automatics, or as the main machine in a boutique print shop focused on quality.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Iodpfx Ajy Evirscqoba Minimum heat input: 40,000 Btu/hr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, total length: 5,050 mm, total width: 5,050 mm, total height: 1,850 mm, compressed air connection: 8 bar, type of input current: three-phase, year of last overhaul: 2025, overall weight: 2,100 kg, power: 2.5 kW (3.40 HP), 𝐌𝐇𝐌 𝐒𝐲𝐧𝐜𝐡𝐫𝐨𝐩𝐫𝐢𝐧𝐭 𝟑𝟎𝟎𝟎 (𝟐𝟎𝟎𝟒) – 𝟖/𝟏𝟎 – 𝟑 𝐅𝐥𝐚𝐬𝐡 𝐂𝐮𝐫𝐞 𝐔𝐧𝐢𝐭𝐬 – 𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐂𝐨𝐧𝐝𝐢𝐭𝐢𝐨𝐧 - 𝟔 𝐦𝐨𝐧𝐭𝐡𝐬 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Automatic screen printing press, 8 print heads, 10 stations, with large format printing capability—can print up to 70x100 cm (27.5 x 40 in) on every station. After being purchased new, it was stored unused for approximately 8 years, with a total output of only 500,000 prints. This machine has been extremely well maintained, regularly cleaned and lubricated, and used in an immaculate working environment. In addition, it underwent a complete overhaul and professional refurbishment by a certified MHM technician last year. New parts (air hoses, electrical components, etc.) were installed wherever necessary to ensure it operates like a new press. Only 10,000 prints have been made since refurbishment. Indexing, print heads, touchscreen controls, and all systems are operating flawlessly. (Additional videos available upon request) • 8 colors / 10 stations • Fully refurbished • All print heads work perfectly • Includes: • 3 flash cure units • 2 sets of MHM honeycomb pallets (50x100 cm, 75x120 cm) • 3 sets of squeegees and floodbars (37 cm, 50 cm, 70 cm) • Machine can be demonstrated in production • Location: Serbia Crjb Az Isy A Eu Esbmbeb • EU-wide transport can be arranged (typically €1,000–€1,500 depending on destination) The machine is in excellent condition, fully functional, and immediately ready for production—no additional investment required. It has been regularly serviced and exclusively used in a professional setting. 6 months warranty will be issued to the buyer that all heads, indexing, touch screen control panel and flash cure units all are working properly. Ibsdpfxjy A Eu Eo Acqsa • Mechanically and electrically flawless • Inspection possible at any time • Ready for direct integration into your production

Condition: used, Year of construction: 1997, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: Screen printing machine Ibedjy N Udvopfx Acqsa - Year of manufacture: 1997 - Equipment: • Mabeg feeder, model MS • SPS drying unit, type UV Top 1200, year of manufacture 1993 • SPS Rehmus explanation unit, type Autostack S-02, year of manufacture 1993 • Steel platform and checker plate on pallets • Control cabinet • Screen printing frames

Condition: used, Year of construction: 2001, - Manufacturer: SPS - Model: Vitessa Multistar G2/C - Machine type: Screen printing machine (complete system) - Year of manufacture: 2001 - Equipment: • SPS feeder machine Ijdpfey N Ugdex Acqoba • SPS dryer, model TS-M2, year 2001 • SPS declaration unit, model Autostack ASR 61+G2, year 2001 • Steel platform and checker plate on pallets • Control cabinets

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Automatic Textile Printing Machine VERSATRONIC S-line 🔹 Configuration: • 8 stations/pallets • 6 printing heads • Maximum print area: 400 x 450 mm • Pallet drive: frequency-controlled AC servo drive 🔹 Squeegee-drive system: • AC servo high-precision drive • 4-cylinder POWER-Squeegee system 🔹 Main Control Unit: • Rotatable control panel with 7” SMART touch display • Microprocessor with diagnostic program 🔹 Printing Programs: ✅ 6 standard printing programs ✅ High-density program ✅ MULTIFLASH program ✅ Cool-stop mode ✅ Sampling program ✅ Start-up/finishing program ✅ Screen-Cleaning mode, stopping pallets between print stations Fobqfb Ijv Ng T Reitjgf ✅ Free-wheel-mode Isdpfx Aev Ng T Rjcqoba _____ 2. Accessories • 8 pcs aluminum sandwich pallets 420 x 500 mm with neck • 8 pcs aluminum sandwich pallets 320 x 500 mm with neck • 8 pcs aluminum sandwich pallets 230 x 500 mm with neck • 8 pcs aluminum sandwich pallets 130 x 500 mm without neck • 6 pcs QS-printing squeegees 410 mm, 65° Shore • 6 pcs QS-printing squeegees 310 mm, 65° Shore • 6 pcs QS-printing squeegees 210 mm, 65° Shore • 6 pcs QS-printing squeegees 120 mm, 65° Shore • 6 pcs aluminum flood bars 410 mm • 1 pcs squeegee holder for wall mounting • 6 pcs micro-registration systems with control on each printing head • 6 pcs 3-point pneumatic screen-locks 🔹 Machine Dimensions: • For a print size of 400 x 450 mm, a frame of 530 x 780 mm is required (profile: 25x25/30x30 mm) • Machine diameter: 3.080 mm 🔹 Energy Requirements: • Power supply: 3x400V V, PEN, 3.7 kW, 5.6 A • Compressed air: 8 bar, approximately 300 liters/hour 🔹 Transport Dimensions: • S-LINE 8: • Gross weight: approximately 900 kg _____ possible to buy to the additionaly: 3.1 Automatic Quartz-flashcure MAGIC 5025 • Medium-wave IR radiators • Radiation area: 500 x 500 mm • With IR-Pyrometer for continuous measurement of print material temperature • Ensures constant temperature throughout the printing process, preventing overheating of textiles and pallets • Power supply: 9 kW, 14 A, 3x400V • Movable stand with wheels + 2500,- € + VAT

Condition: excellent (used), Year of construction: 1998, Semi-automatic, angle-opening screen printing machine THIEME 510. Ijdpfey Ugqlex Acqoba Printing format 55 x 75 cm, electro-pneumatic machine with a height-adjustable vacuum table (up to 40 mm printing stock height), table format 80 x 95 cm, vacuum area 58 x 76 cm, max. screen frame format 100 x 110 cm, with squeegee control, electronically adjustable squeegee and flood bar speed, steplessly adjustable squeegee stroke. Easy screen insertion from the front, pneumatic screen frame clamping, multi-pass printing, registration pins, equipped with 3 sets of printing and flood bars. Requires 400V and compressed air at 6 bar, used, year of manufacture: 1998, very good condition.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: SEAS5050121038350, input voltage: 400 V, total length: 4,000 mm, total width: 4,000 mm, total height: 1,400 mm, compressed air connection: 6.9 bar, type of input current: three-phase, overall weight: 1,565 kg, Automatic screen printing machine M&R Sportsman “E” in very good working condition, manufactured in the USA and known worldwide for its reliability and consistent print quality. The machine is designed for professional textile production and is ideal for medium to high-volume orders. It operates on 400V, 3-phase, 50/60 Hz and requires 100 PSI compressed air. Maximum image size is 50 x 50 cm with a maximum frame size of 66 x 91 cm. The total machine diameter is approximately 3.6 meters. The construction is robust and built for long-term industrial use, offering smooth operation, precise registration, and easy maintenance. Compatible with flash cure units and conveyor dryers. The machine has been maintained and is ready for immediate production. It is currently dismantled and prepared for shipping. Inspection is possible by prior arrangement. Isdpfx Aeyvkzwocqjba

Condition: like new (used), Ecran T 3000 Thieme. Ibsdpey Ah Alsfx Acqja Sartech Europe Lda. In addition to selling equipment, we also provide technical support services to ensure your production line runs smoothly: * Custom manufacturing: We produce high-quality hot air tunnels, conventional UV and electronic UV systems. * Technical expertise: Our specialized teams handle installation, assembly, and both preventive and corrective maintenance. * Machine handling: We are capable of installing, removing, or relocating machines and industrial equipment up to 30 tons.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, year of last overhaul: 2026, Screen printing production line. Ibodpfx Acsy Ahz Ioqja Hot air tunnel with 5 modules + 1 cooler. Sartech Europe Lda Beyond the sale of equipment, we provide technical support services to ensure the proper operation of your production line: * Custom manufacturing: We produce high-quality hot air tunnels, conventional UV and electronic UV dryers. * Technical expertise: Our specialized teams handle installation, assembly, and both preventive and corrective maintenance. * Machinery handling: We are equipped to install, remove, or relocate industrial machines and equipment up to 30 tons.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, Thieme 520 semi-automatic angular-opening machine Year of manufacture: 1996 Print format: 750 x 1050 mm Condition: Final stage of restoration Isdpfsxk T D Uex Acqoba Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacture of UV (electronic) or hot air curing tunnels.

Condition: refurbished (used), Year of construction: 2009, Screen Printing Machine ADCO Squeegee Cutter SC061 (2009). Ijdpfx Acjxk T Hpjqoba Sartech is a company specializing in solutions for screen printing, automation, and robotics, as well as the manufacture of UV (electronic) or hot air tunnels.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Thieme model 3050L screen printing machine, fully refurbished. Format: 140x180 Year: 2007 Condition: Final stage of refurbishment Iodsxk T D Iopfx Acqsba Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: refurbished (used), Siasprint Prima 70x100 machine fully restored. Iodpfexk T Elox Acqjba Format: 70x100 Sartech is a company specialized in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: refurbished (used), Thieme / Tesmoa UV screen printing tunnel (1 lamp), fully refurbished. Belt width: 700 mm Ibsdpfx Aoxk T Hcocqja Year: 2003 Sartech is a company specializing in screen printing, automation, and robotics solutions, and manufactures UV (electronic) or hot air curing tunnels.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, SARTECH EUROPE LDA Ijdpfx Aox Sy Apjcqoba Manufacturing and restoration of machines and industrial equipment for screen printing.