Used Screw Cap for sale (6,453)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (VIDEO available upon request, further comprehensive technical data: see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 capping plungers. - Pre-evacuation system to reduce oxygen absorption. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/h. - Performance range: 0.33l LN 3,000–13,500 bottles/h, 0.5l NRW 3,000–12,000 bottles/h - Low oxygen absorption: maximum 0.02 mg O2/l. - Change parts for different bottle types (0.33l Longneck, 0.33l Steinie, 0.5l NRW) Advantages of the machine: The machine offers numerous benefits that improve the quality of the filling process. Iedpfx Abowqz Nnorean - Smooth, product-friendly filling under CO2 atmosphere. - 50-60% lower CO2 consumption compared to short-tube filling machines. - High durability due to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times - Convertible to can filling according to manufacturer (conversion kit not included) Low operating hours: 3 days per week at 7 hours each, only rarely operated 4 days per week Annual maintenance by manufacturer The machine is immediately available, was only taken out of production about 5 months ago. Original price was approx. €330,000

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Iaodpfoyhakksx Abrsn

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Ijdpfx Asyg Dl Aebrean Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: used, Year of construction: 2022, operating hours: 2,654 h, functionality: fully functional, machine/vehicle number: ITJ618556, overall weight: 403 kg, operating pressure: 9 bar, pressure (max.): 9.75 bar, We are offering a compressor with accessories for sale. It is in excellent visual condition and has 2,654 operating hours. Iaedpfxextpmdo Abrjn

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm Iaodpjydk Ifjfx Abron + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Atlas Copco GA160 screw compressor, 160 kW with 7.5 bar and 30.20 m3/min. Iajdpfxeyg I Rcj Abron

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design Ijdpoyfm Spsfx Abroan The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor Ijdpsyfm Epefx Abroan The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank Iaedpou Nz D Uofx Abrjn - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Year of construction: 2007, condition: used, Screw Compressor Work pressure 10 Bar Iodpfoyddkgsx Abrsan Power 15 kW Output 2,2 m3/min Noise level at 1 meter 61 DB(A) Working voltage 3x 400 V Frequency 50 Hz Dimensions (LxWxH) 1300 x 780 x 1555 mm Weight 470 kg Including compressed air dryer Berko BFN 186 (2007) Dimensions (LxWxH) 535 x 515 x 865 mm Weight 46 kg Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Iajdpfx Aboh Uyg Nersn

Condition: used, Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW  Abmessungen / Dimensions 200 x 80 x 150 cm  Gewicht / Weight 730 kg Ijdsxiv Rnopfx Abrjan Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Iajdpfx Abjx H Ulujrjn Pressure: 8 bar Load hours: approx. 9,600 h #8442

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Iajdpfeyhb R Sjx Abrjn Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: used, Year of construction: 2006, machine/vehicle number: TP106, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Iaodpfx Abeyhbymorjn Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: used, Year of construction: 2007, machine/vehicle number: TP111, Used Capping Machine Tetra Pak Helicap 23 6000 bph The used capping machine Tetra Pak Helicap 23 6000 bph applies plastic screw caps to carton packages. Specifically, Tetra Pak manufactured this model in 2007 and configured it for the 1000 Slim format. The Slim format, which is widely used, has a rectangular profile and a reduced cross-section. As a result, it optimizes liquid packaging by improving shelf stability and reducing material consumption. Ijdpoyhbygsfx Abrean Technical Specifications of the Used Capping Machine Tetra Pak The Helicap 23 model applies the CAP 47 screw cap, which ensures a hermetic seal and allows easy opening for the consumer. Moreover, the screwing system maintains a consistent torque so that leaks or packaging defects do not occur. The Used Capping Machine Tetra Pak Helicap 23 6000 bph operates with a 400/230 VAC power supply, meaning that it supports both industrial three-phase networks and configurations with neutral and ground. Additionally, its electrical system works with 50/60 Hz frequencies, thus adapting to different power standards. The 20A (adjustable) main fuse regulates maximum absorption, while the control circuits function at 24V DC, ensuring a safe voltage for machine operation. In terms of pneumatics, the system requires compressed air at a pressure between 6 and 7 bar. Consequently, this pressure allows the capping and cap-handling mechanisms to function correctly. Safety and Storage Conditions The Used Capping Machine Tetra Pak Helicap 23 6000 bph includes integrated safety devices so that it meets industrial regulations. Because of these features, the system prevents accidents during maintenance and production operations, thereby reducing the risk of malfunctions. Currently, the machine remains in storage in good condition. For this reason, it is ready for reinstallation in a bottling line. Furthermore, its configuration allows seamless integration with other Tetra Pak equipment, ensuring that production efficiency remains high without requiring structural modifications. Applications and Operational Advantages of the Used Capping Machine Tetra Pak This Used Capping Machine Tetra Pak processes up to 6000 bottles per hour (bph). Due to its compatibility with the 1000 Slim format, it works particularly well for packaging beverages in Tetra Pak containers designed for large-scale distribution. This capping machine offers several advantages: It applies the CAP 47 screw cap with high precision. It controls torque application so that waste is minimized. It integrates efficiently with existing filling lines, which helps maintain productivity. It meets industrial safety standards, ensuring compliance with regulations. Moreover, operators can easily incorporate this mach...

Condition: as good as new (ex-display), WEILER COMMODOR 180 GSD / New Machine - Showroom Model - Unused IMMEDIATELY AVAILABLE FROM STOCK - Showroom model / NEW - Unused - CE marking - 3-axis digital readout - Center height: 180 mm - Swing over bed: 380 mm Iaodpfx Aexviiqebrjn - Swing over cross slide: 215 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Speed / gearbox: 25 - 2000 rpm - Automatic longitudinal / face feed - Threads: Metric / Inch / Diametral - Tailstock / Quill taper: MT 4 - Quill stroke: 150 mm - Coolant system - Multifix quick change toolpost with insert - 3-jaw chuck 200 mm - Work light - Chip guard wall - Documentation Dimensions: LxWxH 2.6 x 1.6 x 1.7 meters / Weight 2000 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 2004, operating hours: 28,000 h, machine/vehicle number: TP117, Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Iajdpfx Aboyhblvsron Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other still beverages Documentation: manuals available Safety: integrated safety features included Advanced Automation & Control Systems Designed around an industrial PLC with a user-friendly HMI, the TCA45 facilitates stable, repeatable cap application. Recipe-based settings support format recall, and process alarms help operators maintain consistent performance. Torque control, cap presence verification, and fault diagnostics contribute to cap quality and minimize rework in high-speed beverage production. PLC/HMI control for straightforward operation and monitoring Automatic fault detection with guided troubleshooting Integration-ready I/O for upstream filling and downstream packing synchronization Electrical: built for standard industrial power supplies (details per manual) Machine guarding with interlocked access doors and emergency stop circuits Production Line Integration Capabilities This cap applicator is well-suited to second hand or newly engineered used bottling line projects. It interfaces efficiently with infeed/outfeed conveyors, bottle orienters, fillers, and labelers, ensuring balanced line flow and minimal downtime. Compatible with Tetra pak fillers. Communication-ready for line control and buffer management Machine Condition & Maintenance History The unit is currently under maintenance, undergoing inspection and service to verify core functions and safety systems. Wear components are being checked and adjusted as needed to align with expected performance at up to 7,500 bricks/hour. OEM manuals are available to support commissioning, operation, and preventive maintenance schedules. Operational Performance & Versatility Optimized for consistent, high-quality capping, the TCA45 supports a broad mix of beverage formats common in industrial packaging. With suitable change parts, it can handle PET and glass bottles as well as aluminum containers, making it versatile for diversified production runs. Suitable applications: water, juice, beer, wine, functional drinks, and similar beverages Stable cap application to support product integrity and shelf-life Gentle handling...

Condition: used, Year of construction: 2011, operating hours: 938 h, machine/vehicle number: CE145628, Empty weight: 3.070 kg Lifting capacity: 350 kg Iaodpeydhrhefx Abrsn Working height: 1.400 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 304 h, machine/vehicle number: CE145603, Empty weight: 1.730 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 50 Iedpfeydhq Rjx Abrjan Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 1,188 h, machine/vehicle number: CE140920, Empty weight: 2.630 kg Lifting capacity: 300 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Iaodjydhqkspfx Abrsn Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x1.53 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 690 h, machine/vehicle number: CE145089, Empty weight: 2.235 kg Lifting capacity: 450 kg Working height: 1.020 cm Isdpjydhqdofx Abrjan Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, total length: 1,150 mm, total width: 720 mm, total height: 1,640 mm, power: 7.5 kW (10.20 HP), volume flow: 1,000 m³/h, operating pressure: 8 bar, pressure (max.): 11 bar, noise level: 64 dB, rotational speed (max.): 2,930 rpm, Screw Compressor KAESER SM 12 - Year of manufacture: 2015 - Sigma Control 2 controller - Power (kW): 7.5 - Volume flow (m³/min): 0.34 – 1.04 - Pressure (bar): 11 - Operating hours: 11,080 / Load hours: 2,650 - With integrated refrigeration dryer ABT 12 (refrigerant R134a) - Mounted on a 270-litre tank - Additionally, an oil-water separator system ÖWAMAT 1 Technically flawless Maintenance log from shortly before decommissioning in 05/25 (filters and sealing rings replaced, Fluid MOL refilled) The screw compressor can be inspected and tested at any time at the Chemnitz location. Iaodpfx Asyk Hbbsbron

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Iajdpfx Absxqgf Esron

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Iaodpfxotx Aknj Abrjn Ready to use condition.