Used Semi Automatic Strapping Machine for sale (108,630)

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : Dsdjfibfaopfx Ah Ujkw SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Dodpsw D Et Defx Ah Uokw Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: excellent (used), Strapping machine Mosca RO-M Manufacturer: Mosca Type: RO-M Semi-automatic carton strapping Strap width: 4 to 12 mm Hot wedge welding system Adjustable strap tension Control: ecomat 100 Foot pedal for strapping release Dkedpfx Ahotncc Uo Uow Table surface: W 640 mm Working height: 830 mm Power supply: 400 V Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2003, functionality: fully functional, VITAP Inserix semi-automatic drilling, gluing and dowel inserting machine Year of construction 2003 Manufacturer: VITAP Italy Djdpfstvzf Nsx Ah Uekw S/N 300951 23 spindles / drilling head Center distance 32mm Total center distance between the first and last spindle: 704mm Max. Drilling depth 70mm Spindle rotation 2800 /min Motor 2.5 HP Tools 5 Dowel diameter 6 / 8 / 10 / 12 mm Dowel length 20-40mm Air pressure 6-8 atm CE-marked Size: L x W x H = 1600 x 940 x 1700mm Weight 450 kg

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Dedpovtp Hbjfx Ah Uskw Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: new, Year of construction: 2025, semi-automatic labelling machine FL-100 Labelling machine FL-100 product diameter: 15 - 130 mm label width: 15 - 200 mm label length: 15 - 600 mm Dkedofnkbrepfx Ah Uow Roll diameter: 300 mm core diameter: 38 - 110 mm dispensing speed: 4 - 20 m/min Supply voltage: 230 V / 50 Hz Weight: Approx. 36 KG Dimensions: 800 (L) x 500 (W) x 400 (H) mm

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut Dkedpfx Ahjfh R Tye Ujw 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23MythoSarya03, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Dodpfev Iquvox Ah Ujkw FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Features: - Can be integrated into any line - Direct transport system with frequency control, adjustable from 0.15 - 0.8 m/s - IFM Ecomat 100 control unit with display - Hot welding system with electronic heating control - Fully automatic strap threading system - Adjustable strapping distance via the control panel - Adjustable strap tension - Determination of the strap end with ejection of remnants - Automatic ejection of the strap rings in the event of incorrect strapping - Structure painted blue - RAL 5010 Dkedpfxjt Srxgj Ah Uow The opening is 74cm wide and 53cm high Strapping capacity: Up to 46 strappings / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 KVA Weight: 300 kg. Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Dksdji D D A Sspfx Ah Ujw Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2012, overall dimensions 710x400x400 mm; power supply 230V, 50 Hz, 13 A; compressed air supply 5.5 bar; performance 6 cycles/min; for paper trays; Djdpowk Ddhsfx Ah Ujkw weight 57 kg.

Year of construction: 2017, condition: excellent (used), 4pcs of semi-automatic strapping machines. Selling all together as a set for 1125 Eur. 1) Optimax TMS300 - tesed, need a little service. 2) Coeman EXS250 - tesed, need a little service and some spare parts. 3) Jetpak EXS-206 - tested, perfect condition. Dksdsid Itvjpfx Ah Ujw

Condition: refurbished (used), Divided into 30 parts Weight range: 32-70 g/pc. Dksdpstt Am Uefx Ah Ujw Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 340 mm, infeed height: 80 mm, total length: 2,100 mm, total width: 1,780 mm, input voltage: 230 V, Semi-automatic machine for gluing wall calendars, intended for small and medium production runs. Additionally, the machine can be adapted for gluing notebook covers. Thanks to its compact dimensions, it is an ideal solution for production facilities with limited space. The CAL-one mini is equipped with a feeder that allows an 8 cm stack of covers to be placed, which are then automatically picked up for further processing. Glue is applied in designated spots on the covers using spray nozzles. Adjustable guides allow for manual insertion of calendar blocks or headers in a repeatable and stable manner. After gluing, the calendars are deposited onto an elevator. The delivery tray can hold approximately 20 cm of finished products. We also offer a fully automatic machine for gluing three-part and four-part wall calendars, the CAL-one 1200. Djdpfxowu Hgys Ah Uskw

Condition: new, Year of construction: 2025, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display. Description Double V-shaped guide Hydraulic feed in 2 axes Dsdpfx Ahskkddvj Uskw Tempered and precisely ground linear feeding guides Central lubrication of guides Digital display Sturdy design High machining accuracy Technical data Table dimensions 800×400 mm Maximum table feed 800×415 mm Distance from table surface to spindle axis 600 mm Table mounting T-slot 1×14 mm Table longitudinal speed 3–20 m/min Rapid vertical feed speed 360 mm/min Transverse travel equal to 1 grade on the vernier scale 0.01 mm Transverse travel equal to 1 wheel turn 2 mm Transverse feed addition 0–8 mm/min Transverse feed 600 mm/min Grinding wheel dimensions 300×30×76.2 mm Grinding wheel speed 2850 rpm Manual vertical travel equal to 1 grade on the vernier scale 0.01 mm Grinding accuracy 300:0.005 mm Grinding roughness Ra 0.32 Manual vertical travel for rotating 2 mm Main motor power 2.2 kW Flood coolant pump motor power 40 W Dimensions 1960×1480×1850 Weight 1800 kg Equipment dependent on the model Magnetic table Grinding wheel Grinding wheel fixture Cooling system Halogen lighting User manual EC declaration of conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2023, condition: new, Machine fills packages automatically. Just insert the bag or pouch into the Bag in Box filler and pull the handle. After the package is filled, return the filling handle into start position and cap the bag. Capacity – 250 pcs. of 3 L bags/h Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. Fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. Suitable for both hot and cold filling. Machine fills both Bag in Box and Stand up Pouch packages with a tap. The filler can have an optional detachable buffer tank for hot filling. It is mounted conveniently on the side of the machine for better inspection and easier washing process. The buffer tank also reduces liquid foaming during hot filling process. The buffer tank has an integrated liquid level control inside for regulation of overspill and level in the tank. Buffer tank also comes with a connection to our pasteurizer. Error of volume repeatability is just ± 0,5 %. The filler pre-vacuums the bags and pouches before filling. Comes with touchscreen panel and multi-language menu. Easy-to-adjust filling table allows easily fill different volumes of Bag in Box & Stand up Pouch packages. Working surface of the table consists of conveyor rollers which are easy to clean and help for the smooth slide of the bags and pouches. Dksdpfx Aeflriujh Usw The filler is easy to clean after work with external and CIP cleaning. Our Bag in Box fillers work in perfect synergy with our Pasteurizers HEAT. They have a special connection between them which prevents liquid from overflowing and ensures easy work. We also offer fully automatic Bag in Box filler AUTOFLOW.

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Dodpfx Ahswb A N Rj Ujkw Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE Dkodpfx Aew Inytjh Usw DARIX EVOLUTION LIGHT

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 Dkodpfxewcftbs Ah Ujw The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit.

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm programmer Weight: 150kg Manufacturer: Morgana, UK Dsdpoxfl Alsfx Ah Ujkw Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper Dkjdpfxov R I D He Ah Uow Never Used / New Model RCP-141 To include Capper Feeder, automatic capper

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Dkodpfowdibxox Ah Ujw Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt Dkjdpfxjw Hrrrj Ah Ujw

Condition: excellent (used), Year of construction: 2012, For sale: PLH Pack Liver Harvester, used but in very good condition. Year of manufacture: 2012 Dsdpfx Ahjtdhtxe Uokw

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: Dksdorit H Rspfx Ah Uew width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy