Used Setting Gauge for sale (9,923)

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm Dsdpfx Aoxp Nfxoh Uswd TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, mileage: 180,000 km, Year of construction: 2012, Serial number: XLRAE45GF0L41xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic Dodoxu Aw Eopfx Ah Uowd

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets Dodpexr Rz Tofx Ah Ujwd This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY NL502 2 AXIS CNC LATHE WITH FANUC 0IT PLUS 3B YEAR OF MANUFACTURE - 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS  STD AIR - AIR GUN  STD CHIP - CONVEYOR SIDE HINGED WITH CHIP BOX  STD CHU - 10 INCH 3 JAW HOLLOW HYD CHUCK INC SET SOFT JAWS  STD CHU - STANDARD HYD CHUCKING CYLINDER - HOLLOW  STD CNC.OP - FANUC 0ITF 3B PLUS WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY  STD CNC.OP - MANUAL PULSE GENERATOR (MPG)  STD CS - COOLANT GUN  STD GUA - FRONT DOOR INTERLOCK  STD GUA - FULLY ENCLOSED SPLASH GUARDING SYSTEM  STD GUA - TELESCOPIC SLIDEWAY COVERS  STD HYD - STANDARD HYDRAULIC UNIT  STD LI - LED WORKING AREA LIGHTING SYSTEM  STD LI - PATROL LIGHT (3 COLOUR)  STD MISC - AIR CONDITIONING IN ELECTRICAL CABINET  STD MISC - BASIC MACHINE INSTALLATION PARTS  STD MISC - CE STANDARDS MACHINE CONFIGURATION  STD MISC - CENTRALIZED AUTOMATIC LUBRICATION SYSTEM  STD MISC - MACHINE MANUALS & OPERATOR HANDBOOKS  STD MISC - STANDARD ACCESSORIES  STD POW - TRANSFORMER (415V, 3PH, 50HZ)  STD SPGB TC - BELT DRIVE SPINDLE - 3,500 RPM - A2-6  STD SPGB TC - SPINDLE MOTOR FANUC 15.0 / 18.5 KW  STD TS - HYDRAULIC TAILSTOCK  STD TUR - 12 STATION SERVO TURRET Dedpfx Ajxt Nrmjh Ujwd MACHINE CONSTRUCTION & FEATURES  SOLID CAST IRON 45 DEGREE SLANT BED CONSTRUCTION  HARDENED & GROUND BOX GUIDEWAYS  12 STATION SERVO TURRET  10 INCH STANDARD CHUCK SIZE - 12 INCH & BAR CAPACITY UPGRADE OPTIONS  15.0 / 18.5 KW MAIN SPINDLE  HYDRAULIC TAILSTOCK MACHINE SPECIFICATION CAPACITY Max. Swing Diameter Over Bed Ø 600 MM Max. Swing Diameter Over Saddle Ø 480 MM Max. Turning Diameter Ø 500 MM Max. Turning Length 570 MM Max. Bar Capacity Ø 74 MM X / Z AXIS TRAVEL X-Axis Travel 280 MM Z-Axis Travel 600 MM X / Z AXIS SERVO MOTOR TORQUE X-Axis Torque 10.5 NM Z-Axis Torque 10.5 NM SPINDLE HEADSTOCK STD Spindle Nose A2-8 Spindle Bore 86 MM Spindle Speeds 30 ~ 3,500RPM Chuck Size Ø 10” - 245 MM Spindle Power 15.0 / 18.5 KW FEEDRATES X-Axis Rapid Traverse Rate 16 M / MIN Z-Axis Rapid Traverse Rate 20 M / MIN Cutting Feed Rate 1 ~ 8,000 MM / MIN TURRET Number of Turret Stations 12 Turret Indexing Time 0.2 SEC / POS Tool Size - Turning 25 x 25 MM Tool Size - Boring Ø 40 MM TAILSTOCK Tailstock Quill Diameter Ø 100 MM Tailstock Quill Travel 100 MM Tailstock Quill Taper MT5 LIVE CENTER ACCURACY Positioning Accuracy (X / Z) 0.010 / 0.010 MM Repeatability (X / Z) 0.005 / 0.007 MM MISCELLANEOUS Power Requirement 35 KVA Power Supply 415V / 3PH / 50HZ Cutting Coolant Volume 240 L Machine Dimensions (L / W / H) 4,290 / 1,880 / 1,750 Machine Gross Weight 4,000 KGS

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter Dwodpfx Ajtt Ug Ijh Ujd - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC control: MSG-501 Axis X mm: 215 Dsdpfx Ahjxfv E De Uswd Axis Z mm: 490 Axis Y mm: +40 / -30 Maximum turning diameter mm: C-Axis increment: 0.001° Maximum turning length mm: 510 Cutting feedrate mm/min X, Z, Y: - Swing over bed mm: Ø 300 Swing over cross slide mm: Ø Bar capacity mm: Ø 56 Max. rapid traverse X, Z m/min: 24 Main Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Main spindle bore: - Main spindle nose: A2-5 Sub-Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Sub-spindle bore: - Sub-spindle nose: A2-5 Turret positions: 12 Number of powered tool stations: 12 Powered tool speed rpm: 6,000 Powered tool power kW: 5.5 EQUIPMENT Chip conveyor Bar feeder: LNS Quick Load Servo II Overhead gantry loader. CNC control system: MSG-501 (Fanuc) Set of fixed and powered tool holders 3-color status light Bar feeder interface Manuals MACHINE DIMENSIONS Length mm: 2,705 Width mm: 2,000 Height mm: 2,120 Weight kg: 5,800

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm Dodoxnpp Iopfx Ah Uswd SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: used, machine/vehicle number: YS2R6X2000537xxxx, mileage: 860,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21746 Specifications: EU-approved until 31.03.2026 Model year: 2015 Mileage: approx. 860,000 km Full air suspension Hydraulics, 140 L tank Euro 6 Length: 678 cm Width: 255 cm Wheelbase: 310/132 cm Curb weight: 9540 kg Drive: 6x2 Power: 581 hp Dwedpfx Ahoxvlbpe Uod Dual pedal sets Roof-mounted spotlights 2x rotating beacons Sleeper bed Coffee maker Radio/CD Air conditioning Remarks: Right-side step is damaged Cylinder head gasket needs replacement Km: 860000 HK: 580 Technical approved: Yes EU-approved until: 31.03.2026 Own weight: 9540 Total Weight: 28000 Payload: 18460 Width: 255 Length: 678 Euro: 6

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Dwjdpfx Ajw Rmakoh Ued Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: ready for operation (used), cutting angle (max.): 45 °, sheet thickness steel (max.): 25 mm, total length: 4,500 mm, total width: 2,800 mm, empty load weight: 30,000 kg, workpiece length (max.): 3,100 mm, passage width: 2,800 mm, throat depth: 400 mm, + 2nd for chamfering the cutted plate (45°) double option: first cut = normal cut / second cut = angled cut for welding Dwedpfxoxuwy Ij Ah Ujd Backgauge: (2) 1000 mm Courant needed: 380 V Height: 3200 + 560mm

Condition: excellent (used), Year of construction: 2010, The XYZ 200TC is a CNC lathe known for its precision and versatility. It features a Siemens 810D Shopturn control system, a 12-station VDI turret. Key Features and Specifications: Control System: Siemens 810D Shopturn. Turret: 12-station VDI turret. Chuck: Hydraulic 200mm 3-jaw chuck. Bar Capacity: 52mm. Swing Over Bed: 420mm. Maximum Machining Diameter: 200mm. Maximum Machining Length: 550mm. Spindle Speed: 4800 rpm. Spindle Bore: 62mm. Spindle Motor Power: 14.9kW. Other Features: Automatic tool setting arm, swarf conveyor, parts catcher, hydraulic tailstock, remote electronic handwheel, and through-tool and flood coolant. Weight: 4100kg. Dwodpfjxrvcvox Ah Usd The XYZ 200TC is a slant-bed CNC lathe, which means the lathe bed is angled, allowing for better chip evacuation and access to the workpiece. It can be equipped with a multi-feed barfeed for automated feeding of bar stock. The machine is typically used in small to medium-sized workshops and production environments. Complete with bar feed, swarf conveyor and tooling.

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Dwsdpfoxvitiox Ah Ujd Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 Dwedpfx Asxfazpjh Usd ATC 10 PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: used, mileage: 135,000 km, Year of construction: 2017, Serial number: WDB9061351N71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20263 Specifications: Km: Approx. 135,000 (can increase) Transmission: Automatic Euro 6 750 kg load capacity 4x2 Sidedoor Okay tires 3 seats 163 hp Radio/CD Air conditioning/AC 2 sets of tires Service at local workshops Dsdpfx Ahexvk U Ie Ujwd Ready for delivery Description:8 pallet Mercedes Sprinter from 2017.The truck is EU approved and ready for delivery.Sold with 2 sets of tires. Km: 135000 HK: 163 Technical approved: Yes EU-approved until: 30.10.2027 Own weight: 2651 Total Weight: 3500 Payload: 774 Width: 217,5 Length: 704,3 Euro: 6 Model: SPRINTER Gearbox: Automatic Number of seats: 3

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Dwedpfew Hxuasx Ah Ued Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2021, Used machine Dwjdpfxsxvnm Uo Ah Usd Year of manufacture: 2021 The path to optimal work results starts with precise, consistent processes, accurate working methods, and minimized margin for error. The result is quality down to the last detail – and our processing machines are designed to meet your professional standards. That's why we have developed a boring and fitting insertion machine that makes operation and settings even easier – the MINIPRESS top. New features enable fast and precise handling, improving your workflow for greater accuracy, efficiency, and quality. In combination with EASYSTICK, the MINIPRESS top is your optimal processing package for all drilling operations on carcasses, doors, and fronts. EASYSTICK is the automated and easy-to-set stop system for boring and fitting insertion machines. From quick and simple machine setup to perfect results, your entire process is optimized: Drilling positions are determined digitally, stops adjust automatically, and guide you step by step to the correct positions: position the panel, drill, done! Equipped with EASYSTICK, planning and processing on the MINIPRESS top are digitized. You can either plan directly on the machine or import your planning data from the carcass configurator – quickly and easily via WLAN or USB stick. The imported production data can be directly accessed and processed further. The EASYSTICK computer also allows you to make processing settings directly at the MINIPRESS top. Enter carcass data and front dimensions, select fittings – EASYSTICK automatically determines the drilling positions for you. Thanks to EASYSTICK, the MINIPRESS top automatically controls the stop positions. The boring carriage travels along the Y-axis automatically, while the worktable and ruler remain in the same position – easy to set up and precise. The MINIPRESS top offers a reach up to 350 mm by adjusting the boring carriage, allowing, for example, centered row drilling in cabinets with large depths. With the MINIPRESS top, you need just one machine for all vertical and horizontal drilling applications. Using the horizontal drilling unit of the MINIPRESS top, you can perform construction borings, e.g., for dowels and connectors, with absolute precision. The horizontal drilling unit is easily accessible and simple to adjust and operate. Features: - Row drilling head with 9 spindles, 32 mm pitch, with positioning pin - With horizontal drilling unit - With various fitting boring heads Availability: approx. mid-April 2026 Location: Wetterau

Condition: used, maximum load weight: 29,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 01/2026, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,710 mm, Equipment: ABS, WIELTON Bulk Maaster with approx. 50 cbm aluminum box body, featuring a lowered "gooseneck" frame, pallet-width version, 7 mm floor, fifth wheel height 1,150 mm, combination rear door with double-wing door and swivel rod lock / swing flap, automatic mechanical 2-hook locking system, 2 grain discharge slides with covers, sliding tarpaulin, load pressure gauge, ABS, EBS, SAF INTRA CD axle(s), disc brake system, automatic lowering of air suspension when tipping, air suspension with lifting/lowering mechanism, lift axle, SAF landing gears, 25-litre water tank, LED side marker/reflector lights. Vehicle may bear advertising stickers and/or lettering. Dwedpsxvgpzjfx Ah Ujd Our offer generally does not include new TÜV approval. Should you require new TÜV approval, we will be happy to provide you with an offer from our partner workshops! Vehicle may bear advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 Dwsdpfxoxvirfe Ah Usd M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, mileage: 550,000 km, Year of construction: 2020, Serial number: YS2S6X4000217xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21733 Specifications: 2020 model Dwsdpoxu A Epefx Ah Usd Mileage: approx. 550,000 Euro 6 Wheelbase: 475/135 cm 6x4 581 hp Total height: 4.30 m Full air Retarder Tires (see pictures) Winter tires Sand beach Cowcatcher Extra light Lift Remote control Bus building cabinets Internal length: approx. 7.3 m Internal width: approx. 2.5 m Internal height: approx. 3 m Refrigeration/freezing/heating Lights in cabinets Automatic AC/climate DAB 2x beds Ready for delivery Description: 2020 Scania S580 6x4 box truck with 2 sets of tires. In it, it creates cooling/freezing and heating. The car is 4.30 m.h. Watch video. Ready for delivery. Km: 550000 HK: 580 Technical approved: Yes EU-approved until: 10.10.2026 Own weight: 15360 Model: S580 6x4 skapbil m/ kjøl, frys og varme og 2 sett dekk. SE VIDEO

Condition: used, maximum load weight: 29,680 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 06/2026, loading space volume: 43 m³, total width: 2,550 mm, total height: 3,350 mm, Equipment: ABS, Tank body for fuels, capacity 42,700 liters, 4 compartments: 1st compartment 10,000 liters, 2nd compartment 13,500 liters, 3rd compartment 5,450 liters, 4th compartment 13,750 liters. Bottom loading, pump, volume measuring system with BARTEC PETRODAT 3003 electronic level gauge, 4 x drain hoses, nominal diameter 80 mm, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension with lifting and lowering function, aluminum rims, ADR approval type FL, AT. Vehicle may be decorated and/or labeled with advertisements. Djdpfxexvgpno Ah Uswd Our offer generally excludes a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Vehicle may be decorated and/or labeled with advertisements. Our general terms of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please do not hesitate to contact us!

Condition: used, mileage: 265,000 km, Year of construction: 2011, Serial number: WDB9066331S52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21696 Dodpext Ddksfx Ah Uewd Specifications: Km: approx. 265,000 Gearbox: Manual Worn summer tires Good winter tires Zepro tail lift, 500 kg Side door Wired remote control 3 seats Euro 5, 163 hp Brake discs front and rear replaced (according to owner) Radio/CD Climate control / AC Service and maintenance done by owner Video Ready for delivery Description:Mercedes Sprinter 316CDI from 2011.Equipped with a Zepro tail lift.Comes with 2 sets of tires.Owner reports that 2 injectors deliver too much and 2 deliver too little.Ready for delivery. Km: 265000 HK: 163 Technical approved: Yes EU-approved until: 31.03.2027 Own weight: 2041 Total Weight: 3500 Payload: 1384 Width: 199 Length: 591 Euro: 5 Model: SPRINTER Gearbox: Manual Number of seats: 3

Condition: used, maximum load weight: 29,730 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2003, loading space volume: 43 m³, total width: 2,550 mm, total height: 3,350 mm, Equipment: ABS, Tank body for fuels, capacity 42,700 liters, 4 compartments: 1st compartment 10,000 liters, 2nd compartment 13,500 liters, 3rd compartment 5,450 liters, 4th compartment 13,750 liters. Bottom loading, pump, volume measuring system with BARTEC PETRODAT 3003 electronic level gauge, 4 x drain hoses, nominal diameter 80 mm, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension with lifting and lowering function, aluminum rims, ADR approval type FL, AT. Vehicle may be decorated and/or labeled with advertisements. Our offer generally excludes a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Vehicle may be decorated and/or labeled with advertisements. Our general terms of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please do not hesitate to contact us! Dwodpfx Aexvgphjh Ujd

Condition: used, mileage: 170,000 km, Year of construction: 2019, Serial number: WV1ZZZSYZKH00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21715 Specifications: EU approved until 23.04.2027 2019 model Approx. 170,000 km Automatic Tires (see pictures) Dwjdpfxjxu Azde Ah Uod 3 seats New battery in 2024 3 sets of tires Length: 598 cm Width: 204 cm Wheelbase: 364 cm Curb weight: 2,482 kg 4x2 Rear-view camera Radio/CD Climate control/AC Description:Volkswagen E-Crafter electric van with a new battery from 2024.Comes with three sets of tires.EU approved until April 2027 and ready for immediate use.Can be delivered at short notice. Km: 170000 Technical approved: Yes EU-approved until: 23.04.2027 Own weight: 2482 Total Weight: 3500 Payload: 943 Width: 204 Length: 598,6 Model: ANDRE Gearbox: Automatic

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19238 Specifications: - 2020 model - 380 hours and 830 hours - Pump is Atex and EX approved - DNV 2.7.1 Containers - Volvo Motors - Light - Ready for delivery Description: We are talking about 2 identical pumps, both of which have conversion kits. Set 1: 2500 bar 40l/min Set 2 1000 bar 100L/min The pump has been running for 380 hours and 830 hours, respectively Dwjdpfx Ahevg Abxo Uod The pumps are Atex and EX approved according to Zone 2 offshore use The pump is built in DNV 2.7.1 containers We have machine card on one machine It includes various sensors for the machine, which are fully encapsulated in ex enclosures. Ready for delivery. Own weight: 1 Model: 2 stk 2020

Condition: used, mileage: 191,000 km, Year of construction: 2008, Serial number: YS2P6X2000204xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21701 Specifications: EU approved until 20.08.2026 Dodpoxt Dfbofx Ah Uewd Model year: 2008 Mileage: approx. 191,000 km Automatic with clutch Full steel 2 sets of tires Snowplow rigged Rearview camera Spreader included Length: 770 cm Width: 255 cm Wheelbase: 350/135 cm Curb weight: 13,825 kg 6x2 420 hp Zetterbergs body Rotating beacon Extra work lights Tow hitch Radio/CD Air conditioning Description:Scania P420 from 2008 with only approx. 191,000 km.Previously owned by a municipality in Østfold, with full service history from Scania.Equipped for snow plowing and includes a salt/sand spreader.Comes with the tires shown in the photos, plus a new set of studded winter tires.Ready for quick delivery.See video for more details. Km: 191000 HK: 420 Technical approved: Yes EU-approved until: 20.08.2026 Own weight: 13825 Total Weight: 27000 Payload: 13100 Width: 255 Length: 770 Euro: 4 Model: P420 6x2 Brøyterigget Tippbil. Lav km. SE VIDEO Gearbox: Automatic