Used Shrink Films for sale (1,637)

Condition: good (used), SMIPack FP560A Lsealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph Nedpfex H Tfgjx Ahfscu

Condition: good (used), Rochman SVA6035 Sleeve wrapper with shrink tunnel Nodpfx Ahex H Tgqefecu Rochman shrink wrapper, 600mm sealing bar, adjustable temperature and speed controls, once sealed feeds into SMIPack T650EF shrink tunnel, max product height 300mm, 3Ph

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm Ncsdpfxsd Hb Ace Ahfsu All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Nodpfotrtztox Ahfscu Length 2995 mm Width 1250 mm Height 1550 mm

Condition: good (used), Year of construction: 2008, Supervac GK 840 B Shrink Wrapper 9.9 KW Nedpsqu U D Dsfx Ahfjcu 23.2 amp 700mm Belt Width Three Phase Power Fully Stainless Steel

Year of construction: 2019, condition: like new (used), Automatic intermittent-motion machine designed in accordance with cGMP standards for wrapping with stretch film. Conceived primarily for the cosmetics and pharmaceutical markets, simplicity of design and high-speed output are its main features. Main features: Servo driven motor guarantees reliability and synchronized movement even at high speed Machine and motors managed by PC Balcony style structure with clear division between mechanical parts situated at the rear of the machine and product flow at the front Ergonomic structure facilitates machine inspection and provides high workflow visibility Nedpfxsyb Tvtj Ahfjcu Simple and linear construction for easy cleaning Speed, strokes and single group positions are set up from the PC by programmable logics, making correct machine set-up automatic and size changeover extremely quick and easy

Condition: used, Year of construction: 2009, Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides.   Technical data  year of manufacture: 2009 capacity 60/min  adjusted formats: 1,5L PET (2x(3x2)) operation: film only  application: water, beer, CSD condition: very good, still connected  Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available  Nodpfoydkblsx Ahfecu

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. Ncodpsyrup Aofx Ahfsu This system was previously used to pack donuts and was in production for approximately 9 months in total.

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Njdpfxsxrc Hhj Ahfocu

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW Ncjdpfx Ajwgyx Tehfju

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Njdpfx Ajw En Ugjhfocu

Condition: excellent (used), We have a BECK HV600 shrinktunnel available. This machine is ready after complete maintenance and is working like new! Ncjdohcdhlspfx Ahfeu The measurements are in the pictures.

Condition: used, Year of construction: 2006, Manufacturer: Robopac Model : Athena 5545 / Combi Year: 2006   Type : Automatic L-shaped shrink-wrapper and shrink tunnel Dimensions of sealing bar : 550 x 450 mm Sealing dimensions : 500 x 350 mm Minimum product size : 50 x 50 x 20 mm Ncsdpfex R Dd Uex Ahfju Maximum product height : 120 mm Film reel width: 600 mm Inverter-controlled conveyor belt speed: 10 – 40 m/min Production capacity: 30-35 packs/minute (depending on product dimensions and shrink film specifications) Power : 11 KW   Machine in operation: ?v=XY4arSTWZSs

Condition: used, Year of construction: 2014, Manufacturer : Smipack Model: BP800AR 280ST Year : 2014 Type : Automatic monobloc shrinkwrapper   Power : 17,2 KW Output capacity : 17 units / min Pneumatic stacker for rigid products Variable speed 90° infeed conveyor Multilingual menu   Width of infeed conveyor belt: 280 mm Product infeed height : 165 mm Ncodpfox R At Iex Ahfju Maximum bundle height: 380 mm Sealing bar: 760 mm  

Condition: used, Year of construction: 1997, Continuous Heat shrink tunnel of BFB Packaging S. R. L. model M32N. Adjustable manual damper Internal circulation fan Exit cooling fan Njdpfx Ahox Rz S Nofscu 380 V / 50 Hz Control panel with digital temperature regulation, emergency stop, painted steel construction and mounted on four adjustable feet. Material used to apply heat shrinkable film to bundles, packages, packs.

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Ncsdpsxnzlhefx Ahfou Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: like new (used), Year of construction: 2026, functionality: fully functional, The BP series of monobloc semi-automatic and automatic shrink wrappers with sealing bar stands out for its versatility. Depending on the model, this range of packaging machines is particularly suitable for packing an extremely wide variety of products from different market sectors in film only, pad + film, or tray + film configurations. Ncsdpfxsyvhzzo Ahfeu Equipped with 90° or in-line infeed, a multi-push system, and cutting-edge technology, these machines integrate perfectly and easily into shrink film packaging lines. The BP Series can reach output rates of up to 25 packs per minute. This machine is used as a demo unit for clients and features the pusher automation option for easy operation!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Ncjdpfowg Sd Uox Ahfeu Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Ncedpfx Aowg R Rtshfsu

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Ncedewg Sgcspfx Ahfju Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, NEW from Agfa Factory - expires minimum 18 Months after purchase Ncedpfx Ahsb Rlbbefeu AGFA HND 600BD Film 355 mm x 60 m 35,5 cm width - 60 m length Specification: 600BD Code: E7TE5 For many different Imagesetters - e.q. AccuSet and Avantra 25 / 30 with Redlight-Laser 650 - 670 nm Also as AGFA HNS 600BD Film 355 mm x 60 m available

Year of construction: 2012, condition: good (used), Angle sealer with shrink unit, vacuum packaging system, vacuum packaging machine, hood shrink machine, hood shrinker, film packaging machine -electronic temperature control -max. Pack size: 800 x 600 x 310 mm -Max. packaging weight: 18 kg -Dimensions: 1870/1010/H1200 mm Nedod H Nv Djpfx Ahfocu -Weight: 212 kg

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar Ncedpjvyq Dusfx Ahfou -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: good (used), friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shrink disc, shaft-hub connection -Manufacturer: Ringspann, shrink disc: for crane chassis Ncsdsv Hw Igepfx Ahfou -Type: RLK 603 S-85x155 .: 1048 1782 -Hole: Ø 85 mm -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 155 x 48 mm -Weight: 3.5 kg/piece

Condition: used, Film thickness control system Ncodpfx Ajcc Enlshfsu -Manufacturer: LITOMAT -Type: AIS-AR-1016 -Number: 1x available -Price: per piece -Dimensions: 145/165/H75 mm -Weight 0.6 kg/piece