Used Shrink Films for sale (1,625)

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Iijdpokn Rz Hofx Abvjc Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Isdpox Avxrefx Abvjic Model: HTC5030D Year of manufacture: 2018 No operating hours! Pass-through width: approx. 50 cm Pass-through height: approx. 30 cm Overall length: approx. 220 cm 21225

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production Isdpfx Asr Ndi Isbvsic - Connected loads 380V, 10A, 50Hz, 5kW - Price 1.500,00 €

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Isdpfx Abjvvlyievjic Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Iedpfx Asv D Eziebvjic Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Iiodpfov Nl A Rex Abvoc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Iedpfev Nl Dbox Abveic Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm; max. length of sealing blades: horizontal = 903mm, vertical = 750mm; power: 220V/3.5kW; machine dimensions: L2430xW1550xH1300mm; weight: 930kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W700xH250; tunnel size: L1500xW800xH300mm; power: 380V, max. 20kW; machine dimensions: L1800xW1290xH1300mm; weight: 750kg. Dimensions of infeed and outfeed conveyors: L1000mmxW800mm each. Total dimensions LxWxH: approx. 6230x1550x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iijdpfx Abov Nl Dhovoc

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Iijdpfxswxtkts Abvoc Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request.

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters Iisdpow Ahfgsfx Abvoc

Condition: good (used), Smipack SL55 Shrink Wrapper This machine is in very good condition and ready for production. The photos show the actual product. Made in Italy. Description: Iisdpszdav Sefx Abvec Smipack series of shrink wrapping machines. Their main advantage is their compact design, requiring less space than other similar units on the market. Technical specifications: Product dimensions: 560x430mm Maximum product height: 260mm Power supply: 230V.

Year of construction: 2019, condition: excellent (used), The Smipack FP6000CS is a high-speed, fully automatic L-bar sealer. Featuring continuous sealing ("CS") and a motorized center seal, it excels at packing a wide variety of items with centered high-quality seals. The "CS" designation signifies the addition of a motorized center seal that adjusts the longitudinal seal to the vertical center of the product Machine Type: Fully automatic L-bar sealer Iisdpfx Abjy Synfjvjc Sealing System: Continuous sealing ("CS") with hot knife / PTFE-coated blade Sealing Bar Dimensions: 640 mm 510 mm Max Pack Height: Up to 200 mm \ 7.8 inches Max Foil Width: Up to 600 mm Production Output: Up to 3,600 packs per hour (depending on product size and film used) Conveyor Speed: 10 to 30 m/min, electronically adjustable via inverter Power Supply: 220 - 240 / 380 - 415 V | 3PH + PE / 3PH + N + PE | 50/60 Hz Installed Power: 3,350 W Usable Films: Polyolefin and Polyethylene up to 30 mu

Year of construction: 2019, condition: excellent (used), Adpak Smipack Heat Shrink Tunnel Year 2019 The SMIPACK T452 is a high-performance, double-chamber heat shrink tunnel Machine Dimensions: 1900 mm L x 835 mm W x 1440 mm H Tunnel Chamber Dimensions: 450 mm W, 230 mm H Conveyor Speed: Variable from 4 - 29 meters per minute Control System: FLXMOD® equipped with an alphanumeric LCD control panel and modular power section Cycles: Capability to store up to 10 different work cycles Film Compatibility: PVC, polyolefins, and polyethylene up to 80 mu Iedpfxey Sx Abo Abvsic Conveyor Belt: Features a motorized chain of silicone-coated rollers with an integrated product alignment device In excellent condition Ready for use

Year of construction: 2012, condition: good (used), Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 Isdpfjpm D T Usx Abveic 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I Iiedpjyilyqsfx Abvoc YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 71971, total length: 3,070 mm, total width: 2,425 mm, product height (max.): 350 mm, roller width: 950 mm, production capacity: 5,000 unit/h, Automatic shrink wrapping machine with continuous side sealing! TECHNICAL DETAILS Maximum production capacity: 5,000 units/hour Product dimensions Product height: max. 350 mm Product length: variable Film/roll dimensions Maximum film roll width: 950 mm Maximum film roll diameter: 350 mm Suitable films: Polyolefin, PVC, polyethylene, and polypropylene Sealing unit Sealing bar length: 820 mm Sealing system: continuous side sealing Transverse sealing bar: with PTFE coating MACHINE DETAILS Operation: 7" color touchscreen Operating modes: automatic and manual Control: integrated PLC control Production counter integrated Total power: 3,850 W Power supply: 380 to 415 V / 3 phases + N + PE Power consumption: 15.5 A Dimensions & weight Dimensions (L x W x H): 3,070 mm x 2,425 x 1,765 mm Machine weight: 1,140 kg Isdpfozdkr Njx Abveic EQUIPMENT SMIPACK T852H shrinking tunnel Continuous side sealing with hot knife Transverse sealing bar with PTFE coating Electronic temperature control Automatic film tension control Automatic adjustment of product spacing Electronic speed regulators Color touchscreen with extended user interface Integrated PLC control Production counter Diagnostic system for malfunctions Parameter monitoring Foldable top cover for quick maintenance Motorized, synchronized conveyor High-quality guides and rollers Industrial control buttons from Lovato Access to the sealing area for cleaning and adjustment Suitable for polyolefin, PVC, and special films

Condition: excellent (used), Year of construction: 2020, Minipack Torre Replay 55 Evo Shrink wrapping chamber machine Ijdpfjzcg Edex Abvsic 2020, up to 300 products per hour, programmable, max product dimensions 500mm x 380mm x 200mm, 1Ph

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, heating capacity: 1.2 kW (1.63 HP), Packaging machine Minipack Minima Chamber shrink wrapping machine Minipack with base frame Capacity up to 250 cycles/hour Iedpfx Absy Ik A Esveic Connection 230 V Used machine Visit our large showroom!

Condition: used, Year of construction: 2009, Power / KW Iedpfx Aezcgh Sjbvoic clamping range 3-5 mm voltage / V

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 971955, total length: 3,500 mm, total width: 2,200 mm, type of input current: three-phase, product height (max.): 125 mm, product length (max.): 1,420 mm, product width (max.): 500 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 32 A, power: 11.2 kW (15.23 HP), film width: 540 mm, ZAPPE SKA 50/140 Skin Packaging Machine – Industrial Quality, Lightly Used For sale: a robust and reliable skin packaging machine from ZAPPE, model SKA 50/142 (90), year of manufacture 1997. This semi-automatic machine is designed for professional vacuum skin packaging (VSP). It is ideal for technical components, tools, retail displays, and small to medium production runs. Specifications: • Working area: 50 × 142 cm (also usable at 50 × 90 cm) • Suitable for multiple packages simultaneously Iodsy I Udmepfx Abvsic • Vacuum Skin Packaging (VSP) • Semi-automatic operation • Solid industrial construction Condition: The machine has seen little use and is in very good overall condition. Ready for immediate operation. Applications: • Metal and engineering industries • Retail and display packaging • Small production batches Advantages: • Strong product fixation • Clear, professional presentation • Flexible use for various product shapes Viewing is possible by appointment.

Condition: used, Year of construction: 2004, machine/vehicle number: FA57, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Isdpfxjxurm Ae Abvoic Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking. The straight infeed for round bottles enhances handling reliability and reduces changeover complexity. Installation Requirements & Site Preparation As with most shrink wrappers, installation typically requires a stable, level foundation, adequate f...

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films – Power supply: 400 V, 50/60 Hz, 3-phase Isdpfx Asyaqihjbvoic – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, The Minipack Tunnel 50 Twin is designed for high packaging speeds with small products. Its dual heating chamber with separate controls ensures consistent shrink performance. Like all Minipack shrink tunnels, it is well insulated, energy efficient, and operates quietly. – Dual-chamber shrink tunnel – Independent control of heating chambers – High throughput and shrinking speed – Power supply: 400 V, 3-phase – Installed power: up to 15.0 kW – Maximum product dimensions: 400 × 190 mm (length variable) – Tunnel inlet: 450 × 210 mm – Machine dimensions: 2,130 × 800 × 1,460 mm – Machine weight (net/gross): 260 / 318 kg Iodpfx Ajyank Asbvoic

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO Ijdjx Tr R Uepfx Abvsic The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, MINIPACK Tunnel 50 The Minipack Tunnel 50 is a compact, well-insulated, and quiet shrink tunnel designed for diverse packaging requirements and a wide range of shrink films. A stainless steel version is available as an option. – Shrink tunnel for various packaging needs – Suitable for different types of shrink films – Optional stainless steel version available – Power supply: 200–400 V, 50/60 Hz, 3-phase – Installed power: up to 7.5 kW – Maximum product dimensions: 400 × 220 mm (length variable) – Tunnel entry dimensions: 450 × 240 mm – Machine dimensions: 1,770 × 840 × 1,465 mm – Machine weight (net/gross): 188 / 236 kg Iodpfxex Ttc So Abvsic