Used Shrink Films for sale (1,599)

Year of construction: 2025, condition: new, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). VFFS machine is operated in slanting position to allow protection of easy breakable products like thin deep frozen food or bakery products. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 55 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.7kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1866*1316*2158mm; weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fjdpfx Alov Nnaxs Uogh

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 85 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fsdpfxev Nnbps Al Usgh

Condition: new, Year of construction: 2025, Automatic side sealing machine for products without length limitation. PRO version with kissing table (movable infeed belt) to handle short products. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-L (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; max. package size: L(80-unlimited)xW(50-420)xH(2-180) mm; sealing blade width: 530 mm; 220V/3kW; 6bar; machine dimensions: L1820xW1605xH1350 mm. Fgodpfx Alov Nl Ere Ueh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Sleeve labeling machine Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Fgodpfx Alsxvbz Eo Ush Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A used horizontal form, fill, and seal machine (HFFS) from the DEAPHS series is for sale. It is designed for the automatic production, filling, and sealing of pouches made from flat film. ### Current Machine Condition The machine is currently set up for the production of 4-side seal pouches. The machine forms the pouch directly from flat film, takes over the filling process – in conjunction with a suitable dosing system – and then automatically seals the pouch. The DEAPHS series is fundamentally modular in design and can be adapted for other pouch types and applications, depending on the existing or additional equipment, for example: - 3-side seal pouches / sachets - 4-side seal pouches - Doypack / stand-up pouches Adaptation to other pouch types depends on the format, product, and required machine components and is not part of the current setup. ### Possible Applications Depending on the dosing system used, the machine is suitable for packaging, for example: - Powdered products - Granules and granular products - Food products - Animal feed - Cosmetic products - Technical and other non-food products - Single-serve packs, sample sizes, and samples Different dosing and feeding systems can be used for different products. ### Machine Equipment - Independent film unwinding shaft - Pouch bottom sealing - Pouch bottom former - 3 horizontal sealing units - 2 vertical sealing units - Servo-controlled film/pouch feed - Mechanical pouch cut - Vacuum pouch opening - Photoelectric sensor control for printed film - LCD touchscreen display - Panasonic PLC - Servo film drive The separate film unwinding system enables controlled film tension and adjustment to different film widths and pouch formats. ### Possible Dosing Systems Fgedpfx Aloum R Ezo Ujh Depending on the application, the machine can be combined with the following dosing systems, among others: - Auger dosing - Volumetric cup filler - Multi-head combination weigher - Piston filler - Pump filler / liquid dosing, e.g., Hibar Availability and scope of delivery of the respective dosing systems can be requested separately. ### Technical Data Machine dimensions: approx. 5,500 × 1,100 × 1,400 mm (L × W × H) Net weight: approx. 2,000 kg Power supply: 380 V / 3 phases / 50 Hz Connected load: approx. 6.5 kW Air consumption: approx. 0.23 m³/min ### Installed Components / Manufacturers Components from, among others: Mitsubishi, Panasonic, Autonics, ABB, Airtac, and SMC Suitable packaging films, as well as other dosing, feeding, and peripheral equipment, can also be offered depending on the application. Inspection of the machine is possible by appointment. Further information on pouch formats, working widths, possible dosing systems, and scope of delivery can be provided upon request.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit Fedszy Hrqjpfx Al Uegh • compressor.

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW; compressed air not necessary; max. speed of the machine in neutral: 8 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1380xW690xH1065; weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Fgsdpjv Nly Nofx Al Ush Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(10-180) mm; sealing blade length: 530 mm; 220V, 5 kW, 6bar, 0.6m³; machine dimensions: L4100xW1610xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fedev Nl Hcjpfx Al Ujgh

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fedjv Nl Hpspfx Al Usgh

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg Fgjdswnhxdjpfx Al Uoh - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm Fgsdpfszk Nmrex Al Uoh - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Fsdpfxjtva Sgj Al Ujgh Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: used, mileage: 47,823 km, power: 390 kW (530.25 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2024, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Day Cab * Front chassis design: robust * Mechanical cab suspension * Exterior sun visor * Flexible cab step * Signal horns, 1 set * LED headlights and fog lights * Headlight beam pattern for right-hand traffic * Two LED headlights for the rear of the cab * Roof-mounted warning lights on the front of the cab, pre-wired * Door handles and trim: Black, side trim: cab color * Windshield with sun protection film * DAF Corner View * Central locking, 3 keys, 2 remote controls * Steering wheel, leather * Interior trim color: Luxury * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema seat with fabric upholstery * Dashboard table * Center storage compartment * Cool box or refrigerator * Curtains, without partition curtain * LED interior lighting * Automatic cab climate control * Auxiliary heater with heat recovery pump and timer * Roller blind on the driver's side * Roof hatch with electric operation * FMS connector, extended and pre-wired * DAF Connect * Digital tachograph, VDO 1C, Version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB pre-wiring, 2x mobile, GNSS, Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Electronic Stability Control (VSC) * Rear Warning System * Standard immobilizer * Front: 8.00 t, parabolic, 167N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t / brakes 21.0 t * Rear axle load capacity 10.50 t 10.50 t * Rear: 21.00 t, trailing arm, HR1670T * Rear axle 1, 12600 kg, load index 148 * Front leaf suspension, extra high * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Steel disc wheels, silver gray * Wheel trims, silver gray * MX-13 engine, 390 kW / 530 hp, cab emblem: 530 * Emission class Euro 6 * ECO mode * Idle shutdown, 5 minutes * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Crawl mode * Automated transmission with manual mode, full version * Off-road mode with rocking function * Rear axle ratio 3.61 * Mechanical differential lock * Traction control (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring brake cylinder first front axle * Spring brake cylinder on tandem rear axles 1 and 2 * Parking brake assistant * 2-cylinder compressor without clutch * Driven rear axle with drum brakes * Wheelbase 4.05 m / rear overhang 1.50 m, tipper * EAS unit right, vertical, battery box 45-l-battery tank left * Steel air reservoir * 340-l aluminum fuel tank left, height 505 mm * Splash guard * Cross member D200, Ringfeder coupling D200 * Pneumatic connection for trailer, swivel coupling * Electrical connection for trailer 24V/15-pole, cable: 15-pole, EBS * CAN J1939 functions in the body connection * First transmission PTO NH/4c-R-27/30 * Generator 110 A, batteries 2x 230 Ah * Technically permissible gross vehicle weight (GVW) 2000 kg * Max. total weight of the vehicle with trailer 58000 kg, class 2 * Heated fuel pre-filter * Dust protection shield * Plus warranty - powertrain - 3 years / 200,000 km from registration * CB radio * Reversing camera * Wind deflector * Light bar Light Fix BODY - MEILLER TRIGENIUS D316 - Front wall raised by 200 mm, welded, with a tailgate adapted to the available space Fgodpfx Alezt T Uxj Ueh - TipperMatic on the left (1 TipperMatic cylinder) - Swinging right side wall with hand-operated claw lock - Swinging rear wall with automatic cam lock - Side walls with dust-tight

Condition: used, mileage: 19,081 km, power: 355 kW (482.67 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Front chassis design: Aero floor plate * Air-suspended cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * Two LED headlights for cab rear wall * Reversing camera with pre-installation for a 2nd camera Fgedpfxjx St R Ts Al Ueh * DAF Corner View * LED headlights and fog lamps * Fixed cab entry steps * XG cab * DAF Digital Vision System * Headlamp beam for right-hand traffic * Headlights without height adjustment * LED skylights * Handle and surround: black. Side wall: cab color * LED daytime running lights * Side fenders, extended. Both sides foldable * Side skirts with extension at top and bottom * Adjustable roof spoiler for XG cab * Lower cab step in Crystal White * Chassis color: anthracite grey * CRYSTAL WHITE * Headlight bezel color: Crystal White * Bumper color: Crystal White * Non-functional: mirror housing color * Roof spoiler color: Crystal White * Side fender color: Crystal White * Side skirt color: Crystal White * DDVS housing color: Crystal White * Roof hatch with electric control * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Preparation for compressed air device * Passenger seat: cinema and table, fabric upholstery * Driver’s seat with swivel base * Xtra Comfort mattress, adjustable under sleeper bunk * Upper sleeper bunk * Automatic cab climate control * Curtains with partition curtain * Refrigerator and drawer * Armrests on both sides of driver’s seat * Storage compartment with drawer in center console * Auxiliary power supply: standard + 2x 40 A * ECAS remote control with extended functions * Interior trim color: Exclusive * Dashboard table * Steering wheel with silver accents * Door trim: loose-woven fabric * Cab interior trim: Hexagon * Safety net on both bunks * Dashboard version: Plateau * LED interior lighting * Auxiliary heater with heat pump and timer * Electric window lifters * Pollen filter * Wireless charger * Digital tachograph, VDO Version G2V2A * Speed limiter setting: 90 km/h * PACCAR Connect with navigation * Antennas: radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and prepared * Infotainment including DAF Truck Navigation * Speakers: Luxury * Adaptive cruise control with FCW and AEBS-3 * Predictive cruise control * Preparation for toll system * Driver Performance Assistant * Rear warning system * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness Detection * Standard immobilizer * Compliant with UN regulations R155 and R156 * Alcohol interlock system, pre-installed * Axle load monitoring * Rear axle load capacity: 13.00 t * Front: 8.00 t, parabolic, 163N * Rear: air suspension SR1344 * Front axle 1: 8,000 kg, load index 156 * Rear axle 1: 12,600 kg, load index 148 * Continental * F1, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * R1, 315/70R22.5 CGW CEPD5 154/150 L Traction ACA 3P * Silver-grey wheel trims * Tire pressure monitoring system * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * Steel disc wheels, silver-grey * RR, not applicable * Rear axle ratio: 2.05 * Mechanical differential lock * MX-13 engine, 355kW/483hp, cab badge: 480 * Emission standard Euro 6 * Standard transport, full version * Maneuvering mode * Eco-Fuel * L

Condition: used, mileage: 61,993 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2024, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Sleeper Cab * Front axle design: robust * Mechanical cab suspension * External sun visor * Flexible cab step * Signal horns, 1 set * LED headlights and fog lights * Two LED headlights for the rear of the cab * Roof-mounted beacon on the front of the cab, prepared * Door handles and trim: black, side trim: cab color * Windshield with sun protection film * Rear window: double-glazed * DAF Corner View * Central locking * Steering wheel, leather * Interior trim color: luxury * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: cinema seat with fabric upholstery * Dashboard table * Center storage compartment * Cool box or refrigerator * Curtains, without partition curtain * LED interior lighting * Automatic cab climate control * Auxiliary heater with waste heat pump and timer * Roller blind, driver's side * Roof hatch with electric operation Fgjdpfx Aloqc Riks Ush * FMS connector, extended and prepared * DAF Connect * Preparation for toll systems * Digital tachograph, VDO 1C, Version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-ready, 2x mobile, GNSS extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane change warning system * Electronic Stability Program (ESP) * Rear view warning system * Front axle: 8.00 t, parabolic, 167N * Front axle 1, 8,000 kg, load capacity index 156 * Rear suspension 21.0 t / Brakes 21.0 t * Rear axle load capacity 10.50 t + 10.50 t * Rear axle: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, load capacity index 148 * Front leaf spring suspension, extra high * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Steel disc wheels, silver-grey * Wheel trims, silver-grey * MX-13 engine, 390 kW / 530 hp, cab emblem: 530 * Emission standard Euro 6 * ECO performance * Idle shutdown, 5 minutes * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Shunting mode * Automated transmission with manual gear selection, full version * Off-road operation with free swing function * Rear axle ratio 3.61 * Mechanical differential lock * Anti-Slip Regulation (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring brake cylinder, first front axle * Spring brake cylinder on tandem rear axles 1 and 2 * Parking brake assistant * Compressor 2 cylinders without clutch * Drive axle with drum brakes * Wheelbase 4.05 m / rear overhang 1.50 m, tipper * Longitudinal members 310/7.0 mm, with inner reinforcement front/rear * EAS unit right, vertical, battery box + 45-liter AdBlue tank left * Compressed air tank made of steel * 340-liter aluminum fuel tank left, height 505 mm * Fuel tank left * Splash guard * Operation with drawbar, type plate, up to max. GVW * Cross member D200 + ringfeder coupling D200 * Pneumatic connection for trailer, swivel coupling * Electrical connection trailer 24V/15-pole, cable: 15-pole + EBS * CAN J1939 functions in the body connector * Preparation of air control for tipper operation * Side marker lights * First gearbox PTO NH/4c-R-27/30 * Generator 110 A, batteries 2x 230 Ah * Heated fuel pre-filter * Dust shield BODY - MEILLER TRIGENIUS D316 - Raised by 200 mm, fixed welded front wall with a guide plate adapted to the available space - Tipper body control left (1 tipper body cylinder) - Swinging right side wall with hand-operated claw lock - Swinging rear wall with automatic cam lock - Side walls with a stable, continuous, and inwardly inclined upper rail - Ergonomic

Year of construction: 2016, condition: excellent (used), I have 3 pieces. Brand: Multivac Model: R085 Type: Thermoformer Year: 2016 Production hours: 5,011 Power supply: 400V, 50Hz Fsdpswi E Ryofx Al Usgh Power: 7 kW Film width: 420 mm Max. film thickness: Soft or hard film Max. forming depth: 80 mm Cut-off length: 240 mm Machine dimensions (L x W x H): 2,900 × 1,100 × 1,500 mm Machine weight: 700 kg. It is possible to make a tool with any division. Upper film brake with photocell. BUSCH Vacuum Pump We are able to make a new tool for each machine!!!

Condition: new, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Horizontal baling press Presto CC 40 M, year of manufacture 2017, semi-automatic Technical data: Manufacturer: Presto Type: CC 40 M Fgodpfxoz A T Uzj Al Ush Year of manufacture: 2017 Operating hours: 1640 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-strand, polyester strapping, manual Throughput at a bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (L x W x H) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel outlet with fully automatic control. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2012, functionality: fully functional, Strautmann baling press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connection power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-way vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Fgodpez A T U Uofx Al Ush Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Beak-Shaped shrinking dies for U-profiles They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fgodpfoz A Trgjx Al Ueh

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Fgodpezbrrgsfx Al Ush Optionally available: Vivid OmniFow Feeder 380 30 cm stack height max. sheet width 330 mm max. sheet length 380 mm Both are available on short notice.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Fgodpfxeyb Tuie Al Ujh Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. Fsdpoz Ai Dnefx Al Ujgh The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m²

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) Fjdpfx Aljz Dv Uyj Usgh - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Year of construction: 2022, condition: new, Automatic shrink wrapper with 90 degree. Fgedpfx Ajpdp I Ael Ush Made in Italy (2022) 380-415V / 50-60Hz Machine is in a good condition.

Year of construction: 2020, condition: used, functionality: fully functional, The i-Mark digital cutting machine Consisting of the I-Mark feeding system and the Graphtec CE-6000-60 Plus cutting plotter. Fodpsz A D Tbefx Al Uogh The i-Mark system, as a digital cutting machine, enables operator-free contour cutting of adhesive films and digital prints on cardboard, screen prints, and other printing products. The movable arm of the digital cutting machine, which is equipped with a vacuum suction system, lifts the sheets from the input tray and feeds them to the plotter. Depending on the thickness and stiffness of the sheets, the i-Mark digital cutting machine can process 40 to 120 sheets. While the machine is running, additional sheets can be added without stopping the machine. The system is equipped with an internal vacuum compressor, which does not require any external air connections. The i-Mark digital cutting machine.