Used Shrink Tunnel for sale (1,272)

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm Iedpfxju Nuyis Abrehu -The temperature range: 0-400 °C

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Ihsdpfod S Svhjx Abrju Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Year of construction: 1989, condition: used, Standard equipment Isdobriv Nopfx Abrohu

Condition: used, Year of construction: 2023, Shrink tunnel 50 Twin with double blower Equipment - Manual height adjustment of the conveyor belt - Digital control panel with 9 selectable and personalized programs - Possible selection of automatic roller rotation - Adjustable air flow Ijdpeuaklmefx Abrohu - Cooling program - Outfeed roller conveyor as standard - Two independent chambers with temperature control Technical data - Connected load - 380/400 V / 3 ph - Tunnel inlet dimensions - 450 x 210mm - Max. Product dimensions - width 400 mm / height 190 mm - Machine dimensions - 2,130 x 800 x 1,460 mm - Weight - approx. 260 kg ALSO AVAILABLE IN INNOX VERSION !!!

Condition: good (used), Shrink tunnel from a German manufacturer: Ihodpeh U A I Refx Abrou -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Ijdpfstva Sgox Abrshu Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Ijdoyilyqjpfx Abrshu Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework Ihodpfx Aoyf Hliebreu

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Ihjdpow Elytefx Abrou

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. Isdsxp D D Nspfx Abrjhu The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: MF09BB30, type of input current: three-phase, Equipment: clamp, FOR SALE – Minipack-Torre Tunnel 50 Shrink Tunnel (Italy) Machine Description For sale: High-quality Minipack-Torre Tunnel 50 shrink tunnel designed for industrial and packaging applications with hot air film shrinking technology. Italian manufacture, renowned for robust build, reliability, and user-friendly operation. Ideal for packaging products in PVC, POF, or polyolefin shrink film. Technical Specifications (approximate): - 7200W, 11A - Manufacturer: Minipack-Torre (Italy) - Model: Tunnel 50 - Type: Shrink tunnel (heat shrink packaging) - Power supply: 400 V / 3-phase / 50 Hz - Adjustable temperature and conveyor speed - Digital control panel (temperature and belt speed) - Stainless steel roller conveyor inside the tunnel - Emergency stop and main power switch - Tunnel dimensions: approx. 850 × 500 mm (W × H) - Mounted on lockable caster wheels for easy mobility Condition: - Fully functional and tested - Well-maintained, ready for immediate use - Available for inspection at Roffelsen Plastics, Ivanka Pri Nitre (Slovakia) Iedext Dwkepfx Abrshu Price: €3,000 – negotiable Final price depends on inspection and transport arrangements. Ideal for: - Packaging lines for plastic, cosmetic, or food products - Small to medium production facilities - Perfect companion for L-sealers and shrink-wrapping systems Location: Ivanka pri Nitre, Slovakia Phone: available upon request Short version for listings For sale: Minipack-Torre Tunnel 50 shrink tunnel Professional Italian shrink packaging machine in excellent condition. Adjustable temperature and conveyor speed, robust and reliable.

Condition: used, Year of construction: 2020, Manufacturer: Serifroid Model: SR4600 Type: Freezing tunnel Year: 2020 General technical data: - Power supply: 400 V three-phase + N + T - Electrical power: 23.4 kW - Power consumption: 63 A Ihedpfxsylc Sle Abrsu - Operating temperatures: -35°C - Refrigerant: RS-50 - Gas charges: 13.8 kg Conveyor type: HDPE film reel on embossed stainless steel Retention time/product passage: 8 to 30 min Variation by potentiometer Dimensions: 6060 x 1700 x 1920 mm Total weight: 2,400 kg Compressor: - Power consumption 9,230 W - Current consumption 14.62 A - Chilling capacity: 13,400 W - Oil: BSE32 - Quantity: 4.5 l - Weight: 206 kg Condenser: - Condensing power: 22,700 W - Condensation temperature: 40°C - Weight : 25 kg Evaporator: - Nominal capacity: 12,800 W - Blades pitch: 7 mm - Total area: 46.8 m² - Circuit capacity: 9.9 dm³ - Fan : 12 × Ø 315 mm - Voltage: 230 V - Power consumption: 1,320 W - Absorbed power: 6 A - Speed : 1 340 tr/min - Air flow : 30 600 m³/h - Weight : 170 kg Technical documentaion : oui

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm Iodpfx Abjyizk Ijrjhu outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: Isdpfow Ddb Tjx Abrshu - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) machine is modular and can be shortened by ± 1/3. Isdpfxoyil Emj Abrohu

Condition: excellent (used), Year of construction: 2005, Year of construction: 2005 Belt width: 700 mm Belt length: 12500 mm Max. product height: 180 mm Heating: steam Cooking time: 3 - 18 min. Iedpfxexzdu Es Abrohu Power: 3 x 400V, 50Hz, 26kW Dimensions: 14600 x 2400 x 4400 mm Weight: 9500 kg Including continuous belt washer Siemens Simatic S7 control panel

Condition: excellent (used), Year of construction: 1999, Type: STS600/8/130 Serial number: 60 Year of construction: 1999 Belt width: 600 mm Tiers: 2 x 4 pc. Belt length: 60 m Product gap: 130 mm Retention time: 2.9 - 29 min Steam: NW40, 4 - 8 Bar Exhaust: 2 x 2000 m³/h Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 27kW Dimensions: 9200 x 3900 x 4700 mm Weight: 13500 kg Iedpox Ttxtjfx Abrjhu Including continuous belt washer

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Foodco chiller cabinet for chilling down products after heating treatment. Previously used for meat balls, Pan-Fried steaks, Hamburgers but can also be used bor fish products and cheese. Belt wide 600 mm. The cabinet is complete and just need to be attached for a cooling system. Ijdpfoyka I Uox Abrjhu

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. Ihedpfevxz Axsx Abrsu In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt Ihodpfxjyhb D Se Abrou dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW Ihodeyg Edyspfx Abrju product height: max. ± 120 mm

Condition: used, Year of construction: 2000, functionality: fully functional, Tunnel originally supplied by Nodema to the customer from whom we took it back in exchange. Inspected by Nodema. Iedpfxjylnr Ds Abrohu

Condition: reconditioned (used), Year of construction: 1996, Completely reconditioned BVM shrink tunnel. Ijdpfxjuihczo Abrshu

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Glycol 8.5 meter cooling tunnel Ihodpjx Rzrpefx Abreu Belt width - 375mm

Condition: used, Year of construction: 2007, Shrink wrapping machine BVM BMS 6030 W Ihsdpoygwdfjfx Abrsu Year: 2007 With shrink tunnel