Used Sieve Granulator for sale (1,027)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Fjdpe Abrzqjfx Am Eepp Year of manufacture: 2013

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 drum granulator, manufactured in 2012. Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Fpedpfxezrwy Nj Am Ejp Maximum air pressure: 8 bar Weight: 18000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November Fpjdpo Adz R Hsfx Am Esp - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 010325, COMPLETE TYRE RECYCLING LINE – SATURN / ELDAN Fodpfx Amjzmucqs Eopp A complete industrial tyre and rubber recycling line from reputable manufacturers Granutech Saturn and Eldan Recycling is for sale. The installation is sold as a complete, ready-to-dismantle and re-commission technological line. The line includes: SATURN 52-32 HT – industrial primary shredder (Heavy Duty Shredder) SATURN / ELDAN GRIZZLY 80 – secondary shredder ELDAN Granulator 160 – year of manufacture 1999 complete set of belt conveyors inter-stage conveyors 2 magnetic separators for steel recovery vibrating tables and material separation system discharge conveyors complete set of original control and electrical cabinets complete line control automation system Applications: recycling of car and truck tyres rubber shredding steel recovery production of rubber granulate Advantages: complete technological line machines from reputable manufacturers, Granutech Saturn and Eldan robust industrial design suitable for continuous operation transportation and re-assembly possible The machine can be viewed by prior arrangement. We provide assistance with dismantling and loading. Additional photos are available upon request. INDIVIDUAL MACHINES CAN BE PURCHASED SEPARATELY

Year of construction: 2019, condition: excellent (used), functionality: fully functional, TURATTI 1668.02.60.00 | Industrial destemmer for grapes and fruits Manufacturer: Turatti Model / Type: 1668.02.60.00 Serial number: 018/422.01 Year of manufacture: 05/2019 Power supply: 400 V / 50 Hz Overall dimensions: 4100 x 1850 x 2400 mm Drum length (sieving working chamber): 2850 mm Drum perforation diameter: 20 mm This industrial destemmer from the renowned Italian manufacturer Turatti, model 1668.02.60.00, is a highly efficient machine designed for continuous and precise separation of stems from grapes and other small fruits (e.g., cherries, cherry tomatoes, or berries). It is ideal for modern wineries, fruit and vegetable processing plants, frozen food factories, and large-scale raw material preparation lines for further processing or packaging. Fsdpfxozzd Tnj Am Eepp The core of the machine is an elongated, perforated drum with a length of 2850 mm and holes with a diameter of 20 mm. This design ensures maximum efficiency and accuracy in separating the stems while maintaining exceptional gentleness for the delicate fruit skin. The machine operates with a rotating shaft with specially shaped lugs that evenly moves the raw material along the sieve, efficiently separating stems and petioles without crushing the fruit.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm Fpodpozzz Ivofx Am Eep - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper Fedsz A T Rpopfx Am Eepp • 1x Recovery venturi pump

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. Fodpfxez Ai Tvj Am Espp This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Fsdpfx Amoz A Sz He Ejpp Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Fedpfx Aez A S S Som Ejpp Alternatively equipped with underwater granulation, stock no. 2758 MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system, complete incl. pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty Fedpjy At N Rsfx Am Eopp OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. Fedpsz Erbxofx Am Espp MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc. Fsdpfez Ixw Ssx Am Eopp

Condition: new, Year of construction: 2026, operating hours: 3 h, functionality: fully functional, overall weight: 5,250 kg, rotor diameter: 320 mm, total length: 3,861 mm, total height: 2,229 mm, total width: 2,418 mm, rotor width: 1,262 mm, power: 55 kW (74.78 HP), rotational speed (max.): 90 rpm, warranty duration: 24 months, input voltage: 400 V, As the top model in the series, the Robust Reuser SD 1300 single-shaft universal shredder is designed for continuous heavy-duty operation. Equipped with a robust rotor (diameter 320 mm), up to 55 kW of power, and a 120 l hydraulic unit, it operates with maximum efficiency and sets new standards for capacity and durability. High-performance single-shaft system for maximum throughput Fedpfx Ams Adqdvo Espp Flexible feeding options: conveyor belt, excavator, forklift, or lifting arm Siemens® PLC with ReSmart™ control (optional remote access) ReBoost™ & ReMotion™ technologies for smooth and rapid operation without blockages Externally mounted rotor bearings for easy and quick maintenance Hardox® screen for absolutely homogeneous final granules

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Available quantity: 4 Diameter: approx. 3,500 mm Cylindrical height: approx. 9,900 mm Overall height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the upper section: 15° Equipment and connections: In the upper section: 1 x access and ventilation opening DN 600 with cover 1 x ventilation opening with cap 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane lugs On the shell: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe supports for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower base ring The silo ends at the bottom in a 90° cone with flange DN 200 (discharge height: 1,000 mm). Additional cost: Two of the silos have a two-section ladder with fall protection (including 1 rest platform). Fpjdpeipyq Nsfx Am Eep The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its functionality! Please note that the two silos differ slightly in their connections and their positions. Otherwise, as per the images and drawing.

Condition: used, mileage: 122,506 km, power: 175 kW (237.93 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 6,380 kg, maximum load weight: 4,120 kg, overall weight: 10,500 kg, axle configuration: 4x4, wheelbase: 3,300 mm, brakes: engine braking, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,460 mm, loading space height: 1,760 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 122,506 kilometers * 4 x 4 all-wheel drive with drop-in tires Fjdpevhp Uhefx Am Ejpp * Ideal for conversion into a motorhome/expedition vehicle * Can be unloaded to 7,490 kg. * Complete documentation and test books available * Aluminum body 4.30 m with standing height * Sortimo shelving system * Workshop equipment * Sieve pressure floor * DIN lashing eyes * Sockets * Interior lighting * Interior dimensions 4.30 m x 2.46 m x 1.76 m * Staircase can be slid underneath * Accessible box roof * Restraint system for superstructures on the roof * Trailer coupling * Trailer load: 13,500 kg * Additional ball head trailer coupling 3,500 kg * Leaf suspension front and rear * Driver's cab with 3 seats * Auxiliary heating * Air-sprung driver's comfort seat * 6-speed manual gearbox * Differential lock * Hill start assist * Multifunction steering wheel * Engine brake * Stereo CD * CB radio * Wheelbase 3.30 m * 10,500 kg gross vehicle weight * Unladen weight 6,380 kg * Payload 4,120 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Fpodoz Ryhxepfx Am Ejp Stored in a covered, enclosed warehouse.

Condition: used, Year of construction: 2019, Motan Luxor EM A 60 Dry Air Generator / Drying System (2019) designed for efficient plastic granule drying. This unit delivers a precise dry air flow to maintain optimal dew points and process stability in plastics processing (injection molding / extrusion). Technical Specifications : Operating Voltage : 400 V / 50–60 Hz (3PE) Control Voltage: 24 V DC Nominal Current : 11 A Backup Fuse : 16 A Short-circuit Current : 6 kA Max. Weight: 195 kg Drying Bin Capacity: 60 L Fjdpsz Rt Ilofx Am Espp Process Air Flow Rate: approx. 20–25 Temperature Range: 70–140 °C

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications Fpodpfoz S Ni Usx Am Eop - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands. Fpsdpfx Ae Ad Ey Eem Esp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Preliminary milling unit Granulate adhesive station Pneumatic pre-cutting guillotine Cutting unit with two saws Profiling milling unit Profiling cutter Polishing machines Year of manufacture: 2009 Machine length: 3.7 m CE marking Weight: approximately 1100 kg Fjdpfx Aezz Nnksm Espp Technical documentation: YES Function activation from the control panel External dimensions: 3700x1260x1600

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. Fjdpfx Amoua D Ale Eopp ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Fsdpfow Ahg Rex Am Espp Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen Fjdswx E Tajpfx Am Espp -Slotted sieve: Separator sieve -Inner diameter: 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Year of construction: 2024, condition: new, Overview - of the various variants *not every item is required: Optional: - Bale opener MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net Fodpjff Sbisfx Am Eepp - Sheet metal silo demonstrator with discharge (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction auger - length approx. 4 m Four sieves are mounted on the underside, which are vacuumed. Individual price net from: €9,750 - Suction parts / hoses as a package €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator dust extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³ /400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with +/- 20 kg from €67,550 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Performance: approx. 30 bales per hour Hopper capacity approx. 0.7m³ Level sensors for min./max. fill level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek balers / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded Miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The baler compresses the material fed into the hopper without the addition of binding agents by means of hydraulic pressure and packages the material in plastic sacks. The volume of the material can be significantly reduced with the baler. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry matter. The hopper of the mütek baler can be loaded automatically or by hand and has a volume of approx. 0.7 m³. Containers with a larger volume or with an integrated extraction and filter system as a complete disposal unit are also available. In addition to the automatic filling via dust extractor, mütek also offers filling by means of conveyor screws. In both variants, automatic dust extraction is possible. mütek balers are equipped with a control cabinet for operation. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry matter) - maximum 35 mm long