Used Slide Finish for sale (10,818)

Condition: new, Year of construction: 2026, functionality: fully functional, 11 kW = 15 hp Cutting height 200 mm Saw blade diameter 550 mm with scoring blades Cutting width to parallel fence 1500 mm Sliding table length 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) The large fence on the sliding table can be swivelled 45° to the left and right; Electric height adjustment Hsdpfx Aocyd Ncjfgew Electric tilt adjustment up to 45° Digital display for the tilt angle Machine weight 1250 kg

Condition: ready for operation (used), Altendorf WA 80 panel saw Hjdpjz I Im Aefx Afgjw - Cutting length on the carriage: 320 cm - Cutting height adjusted electrically - Blade angle from 0 to 45° adjusted electrically - 5.5 kW motor, scoring saw - Carriage on rods The machine is in very good condition and has been used sparingly.

Condition: used, functionality: fully functional, SCM SI16 SW panel saw Carriage length: 1500mm Cutting width from the right side: 1000mm Maximum cutting height: 100mm Scoring saw Main saw diameter: 250-350mm Scoring saw diameter: 120mm Hodpfxozg H N Ne Afgjw Saw blade adjustable from 0-45° Saw blade adjustable up/down 3 saw blade speeds: 3200/4500/5500 rpm Scoring saw speed: 9800 rpm Main motor power: 5.5kW Scoring saw motor power: 0.75kW Dust extraction port diameter: 120mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm Hodpfx Aozvdwpefgew • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: as good as new (ex-display), TV25-M PROblue - Mobile polishing and deburring system - Trough vibrator with partition module and soundproof enclosure - Electrical control with stepless frequency control - Integrated dosing pump for process media and additives - Separation and storage unit - Sustainable water treatment Tank volume: 50 liters Usable volume: 36 liters Internal length of the working container: 600 mm Internal width of the working container: 275 mm Hedpeznm Emsfx Afgsw Internal height of the working container: 325 mm

Condition: used, axle configuration: 2 axles, loading space length: 77,400 mm, loading space width: 24,900 mm, loading space height: 30,000 mm, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - EBS – Electronic Braking System - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at [phone number]). Schmitz SGF*C2 flatbed with tarpaulin. Additional headlights at the rear of the vehicle, Schmitz axles, Knorr ABS, disc brakes, spring brake, doors at the front and rear, sliding cover, sliding tarpaulins on the sides, air suspension, 50mm drawbar, cargo area dimensions: length 7,740mm, width 2,490mm, height 3,000mm, tire tread: 1st axle 2-6mm, 2nd axle 2-6mm, permissible total weight: 18,000kg, unladen weight: 5,060kg, payload: 12,940kg. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. [phone number]) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! - = Further Information = Unladen weight: 5,060 kg Payload: 12,940 kg GVW: 18,000 kg Please contact Tobias Ebert for further information. Hsdpfx Afoy Rdmiogjw

Condition: good (used), functionality: fully functional, ROSLER PARKER vibrator Type VR 30 Internal tank dimensions: Hedpfx Aezr Hb Nefgew 1170 x 500 Depth: 500 Lining in good condition. Can be seen in working order at my workshop.

Condition: ready for operation (used), Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT 2E 650 Overall dimensions: 2260 x 1870 x 1450 mm Hsdpfx Asyycc Isfgsw Year: 2005 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Hsdpfx Aoxzvamjfgjw Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) Hedpfxjwgakve Afgow ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, first registration: 07/2015, Year of construction: 2015, Tang EA 48 Ultralight Tautliner Curtainsider Trailer with Sliding Roof • Air Suspension • ABS • Tire Size: 215/75 R17.5 • Tire Condition: Average ~ 18 mm • Unladen Weight: 2,020 kg • Gross Vehicle Weight: 4,800 kg • Load Capacity: 2,780 kg Body: • Length: 7.78 m • Width: 2.5 m • Height: 3.05 m • Volume: 59.33 m³ Hjdowmn Rqjpfx Afgew - German Trailer! - First Owner! - Very Good General Condition! - New MOT/SP upon request and for an additional charge! Subject to errors and prior sale!

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Hsdpex Tgr Tjfx Afgow Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Hjdpfx Asvv H Hdjfgew Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 Hsdpfx Afovpikxsgew for small parts with 10 chambers. Accessories: 8 x plastic containers, 4 of which come complete with lid and holder. Further details to follow. The machine can be viewed under power.

Condition: new, Holzprofi panel saw KS315 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 4 kW Hodpfjvru T Dsx Afgow Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Format table size 3200 x 375 mm Blade dimensions 315 mm Cutting depth 100 mm Scoring saw blade 120/20 mm Speed saw blade 4500 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 700 kg

Condition: new, The industrial format saw from Holzprofi with a professional aluminum format table, fully anodized. Very stable guide of the format table for precise work even with heavy workpieces. With its own motor for the scoring unit for easy switching off. CE compliant with declaration of conformity. Technical data: Format table size: 3200 x 416 mm Cast table dimensions: 554 x 1008 mm Cutting length: 3000 mm Hsdpfsvru U Uex Afgjw Cutting width: 1300 mm Main motor output: 7.5 kW S6 (6 kW S1) Pre-scoring unit: 1 kW S6 (0.75 kW S1) Saw blade diameter: 350 mm Saw blade swivel: 90° - 45° Speeds: 4500 rpm Max. cutting height: 115 mm Suction diameter: 125 + 80 mm Weight: 800 kg Installation dimensions without extension table L x W: 3700 x 3900 mm Installation dimensions with extension table L x W: 3700 x 5000 mm Optional optional equipment: Digital display on the parallel stop Digital display on the Cutting ruler (layout table) Format table length 2500 or 3000 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241202, total height: 860 mm, overall weight: 320 kg, total length: 1,170 mm, total width: 1,170 mm, type of input current: three-phase, tank capacity: 150 l, usable tank capacity: 100 l, input voltage: 400 V, workpiece width (max.): 170 mm, workpiece height (max.): 170 mm, outer diameter: 170 mm, workpiece length (max.): 170 mm, inner dimension width: 260 mm, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 60 kg, Equipment: rotational speed infinitely variable, The round vibrator Vibra-Line DK impresses with an open, curved container, which has a capacity of 150 liters. This model is equipped with an air-controlled automatic emptying system and a a sound-insulated lid, which ensures convenient and quiet operation. The U-shaped inner container has a 22 mm thick polyurethane (PU) coating, which ensures exceptional resistance to process wear. The capacity of 150 liters allows for approximately 50 to 100 liters of metal parts per load, depending on their shape and size. Hedsviu Ehopfx Afgjw The wide drum and low discharge height make it much easier to unload the processed parts. The machine is controlled by a frequency converter with infinitely variable speed control, which is operated via a 5.5-inch touchscreen. Process times, languages and speeds can be adjusted quickly and easily. and speeds can be adjusted quickly and easily. The control system also controls two external connections, which can be used for process water and compound dosing. The Vibra-Line 150DK circular vibrator is supplied as a plug-and-play solution and only requires a 16 amp CEE plug, 4 bar compressed air and a water connection for commissioning. a water connection for commissioning. Our devices comply with the EC machine/device directives and are supplied with manufacturer's declaration of conformity and CE mark.

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m Hedjw Nxkfjpfx Afgsw The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm *

Condition: ready for operation (used), gate fold attachment Hodoir A I Repfx Afgsw

Condition: good (used), Year of construction: 2011, Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Hjdpfx Asfndpnefgew Weight: 1230 kg

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Hodpshnc E Ajfx Afgew Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Plockmatic PBM350 brochure production system. Item for sale: 1 x Plockmatic PBM350 with the following equipment: Includes trimmer Includes book fold Meter readings: Total: approx. 780,616 brochures Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Hsdpfxjym Nnvo Afgjw A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand Hsdpfx Afozfwl Sjgow RÖSLER Type R2000 1 BT Electrical connection 380V Dimension L (Length) 3200mm Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: like new (used),

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Hedpfx Aey E S Evofgew