Used Small Unicorn for sale (3,700)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Saw blade diameter: 300 mm - Saw blade speed: 4750 rpm - Motor power: 4.5 kW - Motor speed: 2880 rpm - Max. cutting width: 5300 mm - Max. cutting height: 2100 mm - Max. panel height: 2200 mm - Max. processing thickness: 80 mm - With small parts support - Dimensions: approx. 6500 x 1300 x 2880 mm - Weight: approx. 900 kg Availability: short notice Nodpfx Aoy Dkg Nshfecu Location: 63934 Röllbach

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 Printing area: 2500 x 1300 mm High speed: Prints up to 25 m²/h or up to eight sheets/h (4C color configuration) in the format 2440 x 1220 mm and up to approximately 12.5 m²/h (4C+W color configuration) with simultaneous white printing New ink supply: The 1-liter ink bottles can be easily replaced from the front – making refills much faster! Simple operation – no alignment problems: Equipped with alignment pins and a printed ruler for precise positioning of the media on the printing table. The registration pins secure the media to prevent it from slipping. Thanks to the measuring scale, the layout and RIP data can be easily adjusted to the position. More flexibility thanks to direct printing, even on thick media: Printing on boards up to a height of 50 mm. Reduced banding streaks thanks to the Mimaki Advance Pass System. Special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): For glossy surfaces – to avoid dust adhesion and the formation of small air bubbles, the drying time of the ink and the intensity of the UV light are simultaneously reduced with MCC. This creates both glossy and stylish matte surfaces. In addition, the print can be embossed with several layers of clear varnish to achieve a multi-dimensional effect. Convenient ink selection - LH-100 hard UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% deformable and therefore suitable for various substrates - White ink for backgrounding reduces light transmission - Two-layer printing with white on clear and colored surfaces - Enhancement of prints through glossy or matte varnish finish Environmentally friendly printing: No release of harmful substances through UV printing technology. Lower power consumption and longer service life thanks to UV LED lamps. RasterLink 6 - Powerful RIP supports excellent color reproduction - Various print jobs can be easily nested together - Simple and user-friendly application - Self-explanatory icons help you find your way around quickly Nedpey Nugqefx Ahfocu - Thematically related RIP settings are grouped together in one window and can be saved as favorites for recurring use - The printing process is monitored directly in the main window - The software can be updated at any time via the Internet, and profiles can be downloaded or updated. Printing process: Piezo inkjet Print head: 2 heads in staggered arrangement Max. printing format (W x L): 2500 × 1300 mm Max. media format (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with uniform weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media suction: Vacuum Number of vacuum zones: 2 sections (in the X-axis) Accuracy: Absolute ± 0.3 mm or ± 0.3% of the specified distance (whichever is greater) Repeatability: ± 0.2 mm or ± 0.1% of the specified distance

Condition: excellent (used), Here we offer you a 3D SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows even large models to be produced without prior division. Furthermore, the large base area increases productivity when printing many small models in a single print job. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinters, operate using a layer-by-layer process based on the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unsolidified powder supports the parts during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Fully automatic (automated setup and self-monitoring, automated powder loading, automated recycling and powder removal, locking binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Nsdszdyxrjpfx Ahfjcu Special setup requirements: None Type: ProJet 660 Pro 3D printer Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 134, 1 x Langhi Sistemi Srls single-head linear weigher. This weigher can be mounted on stand or operate as a table-top unit and is perfect for weighing small granular products such as coffee, pasta, rice, beans, or lentils. Technical specification: Model – LS RCT1. Serial number – 134. Date of manufacture - 2023. Njdpfjwrnacox Ahfecu Weighing range - 50g-3000g. Speed - up to 20 drops/minute, depending on weight and product. Hopper capacity - 4.5 litres. Controls - PLC control with 7'' touch screen. Electric supply - 230 V / 50-60 hz / 1 phase. Features: This linear weigher can store up to 10 preset programs for different products. Condition: Excellent, the weigher has had very little use.

Condition: used, Year of construction: 2003, operating hours: 5,318 h, 2003 | Terex Pegson 428 Track Feeder Impact | Used Crusher | 5318 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 75000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 81 inspection points 58 approved ✅ 23 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine has not been running continuously for a few years, but it does undertake a few small campaigns each year. It has recently worked and is ready to work. It has been parked in the sun (no shelter) hence the oxidation and cracked hoses. We were not able to see the main and magnetic conveyors in operation during the inspection. Please look at all the photos and videos for more details. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40524 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Nsdpfxjyz Ubfs Ahfjcu ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Ncjdpfxezdqkrs Ahfju Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Nodpszdnplsfx Ahfecu Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, offer consists of: Horizon small size standing delivery ED-40 All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Ncsdpfxoyv Ak Re Ahfou Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2019, Storage mezzanine, area approx. 2,960 m2, load capacity 500 kg/m2, incl. small goods lift - used: Nsdpezd T N Rjfx Ahfecu Price ex works: only €145,000 (net) incl. disassembly, packaged and loaded! Only €49/m2!! Price for a larger quantity on request! Supplier: unknown (being investigated) Type: Steel structure storage mezzanine Year of construction: 2019 Load capacity: min. 500 kg/m2 (exact specifications not yet available) Base dimensions: approx. 80 x 37 m Bottom edge of the beams: approx. 3.09 m Column spacing: approx. 6.60 m x 5.86 m Column thickness: approx. 12 x 12 cm Sigma profile height: approx. 35 cm Incl. chipboard, 38 mm Incl. perimeter railing (approx. 1.10 m high) Incl. pallet transfer areas Incl. LED lighting 6 staircases Incl. goods lift Manufacturer: WEP, Year of construction: 2021 Payload: 500 kg Condition: good to very good Available: immediately (still needs to be disassembled) Location: Mainz area We are still trying to obtain the plans for the mezzanine.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: IntNr231595, WICKI CG12GE – Centerless Grinding Machine Year of manufacture: 05/2015 The WICKI CG12GE is a high-precision centerless grinding machine for efficient series production of cylindrical parts with small to medium diameters. The machine operates without clamping between centers. The workpiece is continuously guided between the grinding wheel, regulating wheel, and support blade, ensuring extremely high dimensional stability and surface quality while maintaining high productivity. Grinding processes Ncodpfx Aey U Hgtohfeu - Through-feed grinding for continuous series production - In-feed (plunge) grinding (centerless) for short precision parts and shoulders Technical data (approx.): - Grinding range: Ø 1 – 30 mm - Workpiece length: up to approx. 140 mm (depending on process) - Grinding wheel: Ø 305 × 150 × 127 mm - Regulating wheel: Ø 205 × 150 × 90 mm - Grinding wheel speed: approx. 1,900 rpm - Grinding speed: approx. 30 m/s - Grinding wheel drive power: approx. 5.5 kW - Regulating wheel drive power: approx. 1.3 kW - Total connected load: approx. 10 kW / 400 V Features & advantages - Very high roundness and dimensional accuracy - Ideal for series and mass production - Short cycle times due to continuous material flow - Robust industrial design suitable for continuous operation - Minimal setup and operating requirements - Excellent surface finish quality Fields of application - Automotive supply industry - Hydraulic and pneumatic components - Precision shafts, pins, and bolts - Mechanical engineering and series production - Metalworking and contract manufacturing Gross weight: approx. 1,750 kg Dimensions: approx. 2250 x 1100 x 1700 mm The machine can be inspected under power by appointment. We reserve the right to make changes and correct errors in the technical data and information. Subject to prior sale!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Nodpfx Ahjy U Hh Defocu Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal cylindrical grinding machine – Year of manufacture: 2020 A used EMAG WEISS W11 CNC SL650 is available for sale – a high-performance universal cylindrical grinding machine with CNC control. The machine is ideally suited for demanding grinding tasks on individual parts, prototypes, and small to medium production runs. Nsdpfx Ahezcfgmjfjcu Machine specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of manufacture: 2020 Operating hours: approx. 6,850 spindle hours / approx. 20,422 operating hours Condition: Used, well-maintained, ready for immediate use Technical data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. grinding length: 650 mm (between centers) Center height: approx. 200 mm External grinding diameter: up to approx. 390 mm Max. workpiece weight (overhang): approx. 100 kg (MK4) Max. workpiece weight between centers: approx. 250 kg X-axis travel: approx. 380 mm Z-axis travel: approx. 1,150 mm Grinding wheel diameter: 400 – 500 mm, depending on configuration Rated power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral speed: 20 – 50 m/s Features and performance characteristics CNC touchscreen operation with a Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: the machine can be operated both conventionally and with CNC control High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic grinding wheel truing with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on configuration) Preparation for automation / robot interface is possible The machine can be inspected in operation by appointment. Subject to changes, errors and prior sale!

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Nodpfoyngb Ajx Ahfjcu Double stroke cutting capacity: 600/120mm Command by double buttons Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Machine footprint: Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: ready for operation (used), 1 x stitching unit - 380 Nodpfx Aexxnlpohfscu 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,215 kg, first registration: 06/2026, color: grey, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 1,975 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 76973 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Trailer hitch, electrically pivoting * Heated windshield * 3-zone automatic climate control - auxiliary heater, electric - electric temperature control in the rear * Sliding door, right and left including sun visors in the 2nd row of seats * Technology Package 6: Exterior mirrors electrically adjustable, heated and folding - audio system with 13-inch multifunction display, Ford SYNC 4 including navigation - blind spot assist including CTA rear cross-traffic alert - pre-collision assist, camera and radar-based - driver drowsiness alert - lane keeping assist, lane departure warning, lane change assist, lane centering - traffic sign recognition - wrong-way driver warning - parking pilot system front/rear - adaptive cruise control including Stop&Go function - intelligent speed limiter with speed limit display - all-round camera - Sensico leather-look steering wheel ADDITIONAL EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area * ABS * Airbag passenger side - with airbag deactivation function * Airbag driver side * Airbag: Side airbags - right and left * Battery: H7 AGM single battery * Roof console * ESP - hill start assist - safety brake assist - traction control * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Electric front windows - with quick-up/down function for driver and passenger * Parking brake, electric * Ford Key Free system - including Ford Power Start function * Glove compartment with lid * Heated rear window * Rear window wiper * Interior lighting in passenger compartment * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED turn signals in the front - cornering lights, static - high beam assist * Charging cable for public charging stations (Type 2), single-phase, length: 5m * Cargo area lighting (LED) * Center console, small * Driver drowsiness alert * Emergency call assistant eCall * Package: Rear seat package 14, 6 rear seats, includes: - 2nd row, 3 single seats, middle seat with folding table on the backrest - 3rd row, 1 single seat and double bench seat * Radio accessories: 8 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 16 - in Sparkle Silver * Windshield wipers with rain sensor Nodozfdnmepfx Ahfocu * Rail-based flexible seating system * Side windows fixed, second and third row, right and left * Seat Package 7 - Driver's seat, 4-way manually adjustable - Single passenger seat, 2-way manually adjustable - Lumbar support for driver - Seat heating for driver and passenger (outer seat), automatic - Driver's seat, with adjustable armrest inside - Passenger seat, with armrest inside - Side airbags, right and left - Head-shoulder airbags, front, right and left - Fabric upholstery Plus Style, seat center in Black Onyx, rest in Ebony * Socket: 12-volt connection - in the passenger compartment * Carpet throughout the vehicle * USB port for the 2nd row of seats * Lashing eyes 2 * Immobilizer * Heat-reflecting glass, light tint all around * Central locking with remote control - additionally with a second key with remote control ... and more ----1st owner. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from initial registration (can be extended upon request). We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any questions? W

Condition: good (used), For sale is a professional laminator IBICO IL-12HR (A3). This device is ideal for offices, copy shops, schools, or small print shops. Technical specifications: Ncedpfx Aheufgn Isfeu • Manufacturer: IBICO • Model: IL-12HR • Type: Hot laminator (Pouch Laminator) • Max. laminating width: 320 mm (A3) • Operating voltage: 230V / 50Hz • Power: 1100 W • Temperature range: up to 160°C • Multiple speed settings • Digital temperature display • Reverse function Condition: Used, fully functional. Normal signs of use (see photos). The device heats up correctly and operates reliably. Scope of delivery as shown. Advantages: • Robust metal construction • Suitable for continuous operation • Even heat distribution • Ideal for A3 and A4 documents • Also suitable for thicker laminating pouches

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function Nodpfxjzdc Hms Ahfjcu + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Ncodpfxsxmt Eqo Ahfeu

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Ncjdpfx Aeud A Hkjhfsu Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² Ncodpfxeyga T Ns Ahfsu The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s Ncjdpfxjv T Truj Ahfeu - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Professional precision lathe from the renowned German manufacturer PROXXON. Model PD 400 is designed for precision machining of metal, aluminum, brass, plastics, as well as small steel components. The machine is in very good technical and visual condition. It operates quietly and smoothly. The package includes a comprehensive set of accessories as shown in the photos, including lathe tools, documentation, drill chuck, and BISON lathe chuck. Ideal for workshops, model making, servicing, small-batch production, and precision work. Technical data: • Manufacturer: PROXXON • Model: PD 400 • Power supply: 230 V / 50–60 Hz • Spindle speed range: 80 – 2800 rpm • Motor power: • 240 W at 1400 rpm • 550 W at 2800 rpm • Speed control: 2 ranges • Lathe chuck: 3-jaw BISON • Tailstock with drill chuck • Precision guide bed Ncodpfx Ahoy Sidpsfou • Handwheels with vernier scale • Chuck guard • Forward/reverse spindle rotation Included: • PROXXON PD 400 lathe • BISON lathe chuck • Drill chuck • Lathe tools • Spare inserts/tools • Documentation and manual • Wrenches and accessories as shown in the photos Condition: Used, in very good condition. Shows normal signs of use. Complete machine, ready for operation. Applications: • Precision turning • Model making • Machining of small metal parts • Mechanical workshops

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Ncedpfx Ajzd Sg Ishfeu Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: good (used), 3:1 Wire punching and locking system Stamping tool 3:1, round hole 4 mm Nodozd Hkzjpfx Ahfjcu Working width up to 420 mm Max. stamping capacity per the manufacturer: 30 sheets/80 g/m² foot switch operation manual A small palette with 3:1 wire-binding elements is included in the delivery.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,500 mm, overall weight: 1,540 kg, table load: 400 kg, number of axes: 3, This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Additional equipment Ncsdpsx D Inbefx Ahfsu • Max. Electrode Weight: 80 kg Machine Benefits Technical Machine Benefits • Positioning resolution: 0. 125 µm • Useful surface: 630x400 mm • One holder for the electrode in the exchanger is broken; this is easy to replace with a new one. • High-pressure pump to use the machine for spark drilling small holes no longer works. Extra Information Machine still under power Dimensions Machine Depth 1300 mm