Used Snow Chains for sale (2,669)

Condition: used, machine/vehicle number: W1T9640261077xxxx, mileage: 3,600 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21413 Specifications: Km: 3600! Transmission: Automatic Suspension: Steel front, air rear Euro 6, 428 hp Retarder 6x2 VDL hooklift system 20T hook (no bend) Remote control Sand spreaders Good tires Toolbox New chains Factory warranty on engine and drivetrain Radio/CD Climate/AC Ready for delivery Description:As good as NEW Mercedes hooklift truck from 2024.The truck has only driven 3600 km.Hook container can be included for an additional cost.Ready for delivery. Km: 3600 HK: 428 Technical approved: Yes EU-approved until: 29.08.2026 Own weight: 11330 Ffedpfx Agjxf Tarsdot Total Weight: 28000 Payload: 16595 Width: 255 Length: 859 Euro: 6 Model: Arocs 2543 Gearbox: Automatic

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational Fsdex Dnb Ujpfx Agdsft • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), mileage: 180,200 km, power: 125 kW (169.95 HP), first registration: 09/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,050 mm, total width: 2,120 mm, total height: 2,600 mm, loading space length: 3,400 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and accessories = - None = Notes = Configuration: 4x2, Payload: 1,377 kg, Curb weight: 2,123 kg, Gross vehicle weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (centre axle): 3,500 kg, Towbar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Colour: White, Heated mirrors, Lighting: Halogen lamps, Air conditioning, Seat heating, Bluetooth, Engine power: 125 kW (168 hp), Fuel: Diesel, Euro 6, Drive technology: Timing chain, Transmission: Manual gearbox, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extra long, Rear step, Roof rack: None, Rear closure: Tail lift, Central locking, Number of seats: 3, Seat layout: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2 Open flatbed 3.5t-towbar, navigation, parking heater, MBUX, air conditioning, cruise control, Euro 6, 170 hp!, Spare wheel, Spare wheel tread: 4%, Tyre type: Winter tyres = Further information = Axle configuration Tyre size: 235/65R16 Brakes: Disc brakes Suspension: Leaf springs Axle 1: Tyre tread left: 6 mm; Tyre tread right: 6 mm Axle 2: Tyre tread left: 9 mm; Tyre tread right: 9 mm Weights Unladen weight: 2,123 kg Payload: 1,377 kg GVW: 3,500 kg Functional Loading height: 93 cm Maintenance APK (technical inspection): valid until 06/2026 Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Financial information Leasing price: €348 per month (panel van, 72 months); Please inquire for further information and terms Identification Fsdpsxrlb Ujfx Agdeft Registration number: V-45-NLL

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Base plate: Ø 910 mm -Load capacity: 3000 kg -with chain hoist: Vetter type SIE 10F, year of manufacture 1998 -Lifting speed: 2.8/0.9 m/min -Drive system: yes -Swivel drive: yes -Reach: 6000 mm -Total height: 4090 mm -Hook height: 2900 mm -Swivel range: 360° Ffodpfsx Symuex Agdot -Transport dimensions: 1750/6740/H2250 mm -Empty weight: 1900 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Ffodpfxex S Efpo Agdot Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min Fedpox S Rx Iofx Agdoft rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Year of construction: 2014, condition: used, Field of application: Freight transport Serial number: 20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21074 Specifications: - 2014 model - Model: M70 Fsdpfx Agsw I Nhljdjft - Type: p - Width: approx. 4 m - Ready for delivery Description: We have a 2014 Tellefsdal M70 p 4000 plow with parallelogram for sale. cosmetic damage exists (see pictures) otherwise it should function as it should according to the owner. Optimal for both loose snow and hard-packed slush. Withstands heavy loads and long-term operation. Ready for delivery.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Fjdpjx A U Ncofx Agdsft Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), mileage: 164,954 km, power: 105 kW (142.76 HP), first registration: 07/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,170 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Further options and accessories = - None - Partition wall = Remarks = Ffjdpfxsx Scq Ae Agdet Configuration: 4x2, Payload: 1,161 kg, Unladen weight: 2,339 kg, Gross weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/cassette, CarPlay, Color: Blue, Service manual, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Climate control, Bluetooth, Blind spot monitor, Engine power: 105 kW (141 hp), Fuel: Diesel, Emission standard: Euro 6, Drive technology: Timing chain, Transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Sidewall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double doors, Central locking, Number of seats: 3, Seat configuration: 1+2, Upholstery: Fabric, Seat adjustment: Manual, L3H2, MAXI, automatic, air conditioning, navigation, MBUX, spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 License plate: VLF-69-R Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,339 kg Payload: 1,161 kg Gross vehicle weight: 3,500 kg Functional Loading height: 61 cm Maintenance APK (general inspection): valid until 04.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing rate: €326 per month (panel van, 72 months); please ask for further information and terms

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 - Electric drive 2 x 75 kW Fodpfxox Szflo Agdsft - Rotor length approx. 2 meter - width of the knives 70 mm - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm Ffedpfx Agelzhhcjdot - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Note: with documentation -Load capacity: 1000 kg -with chain hoist: Vetter type SIE 6F, year of manufacture 1998 -Lifting speed: 5.0/1.25 m/min -Drive system: yes -Swivel drive: yes -Projection: 7020 mm -Total height: 3870 mm -Hook height: 2960 mm -Swivel range: 360° -Transport dimensions: 1460/7570/H2280 mm -Empty weight: 1250 kg Ffsdpex R U Azjfx Agdjt

Condition: used, machine/vehicle number: 0C0TTPSxxxx, Year of construction: 1996, Please contact ATS Norway for more information Please provide reference number upon request: 19187 Specifications: - 3 axle - Turn at 1 and 2 - Freshly painted - Good tires Ffedjvg Az Sepfx Agdot - Legal number of chains - Total length 1120 cm - Width 250 cm - Wheelbase 525/134 cm - Steel suspension - OK box - Ready for delivery Technical approved: no EU-approved until: 23.05.2025 Own weight: 7680 Total Weight: 28000 Payload: 20320 Width: 250 Length: 1120 Model: 3 akslet

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Fjdpfxjxpxhvj Agdsft Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), mileage: 102,209 km, power: 120 kW (163.15 HP), first registration: 02/2021, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,950 mm, total width: 2,070 mm, total height: 2,670 mm, loading space length: 4,250 mm, loading space width: 1,760 mm, loading space height: 1,780 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Includes staircase - Partition wall = Notes = Configuration: 4x2, twin rear wheels, payload: 1,133 kg, unladen weight: 2,367 kg, gross weight: 3,500 kg, trailer load unbraked: 750 kg, trailer load with center axle, braked: 3,000 kg, tow bar, cab type: single cab, air conditioning, number of airbags: 1, parking assist: rear, electric windows, electric mirrors, partition wall, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, Bluetooth, engine power: 120 kW (161 HP), fuel: diesel, Euro 6, drive system: timing chain, gearbox type: manual, gears: 6, power steering, ABS, ASR, starter battery, side wall paneling, rear step, roof rack: includes staircase, side doors: 1, rear closure: double doors, central locking, seats: 3, seat configuration: 1+2, seat cover: fabric, seat adjustment: manual, MAXI XL with twin rear wheels EURO6 towbar 3,000 kg original NL163 HP, spare wheel, spare wheel tread: 2%, tire type: all-season tires = Further Information = General Information Number of doors: 1 License plate: VJH-25-Z Axle Configuration Brakes: disc brakes Axle 1: Tire size: 195/75R16; left tire tread: 7 mm; right tire tread: 7 mm; suspension: coil spring Axle 2: twin wheels; inner left tire tread: 6 mm; outer left tire tread: 5 mm; inner right tire tread: 6 mm; outer right tire tread: 6 mm; suspension: leaf spring Ffedox Scqpopfx Agdot Weights Unladen weight: 2,367 kg Payload: 1,133 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 74 cm Maintenance APK (Technical Inspection): valid until 02/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Lease price: €401 per month (panel van, 72 months); please ask for more information and terms

Condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing Fodpfx Agjx Szb Hedeft More information and pictures can be sent on request.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS Ffsdslzhhkepfx Agdet - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: used, machine/vehicle number: WDB9523361K73xxxx, mileage: 150,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20804 Specifications: - 2004 model - EU-approved until 15.05.2026 - Km: approx. 92000 - 8x8 - Length: 1060 cm - Wheelbase: 170/310 cm - 476 hp - 2004 SWS body - Retarder - Tires (see pictures) - Air on boogie - Suspension: steel - Rear winch capacity: 35 tons and 2 winches of 25 tons - Front winch capacity: approx. 9 tons (owner uncertain) - Danesrumpe - Approx. 4 meters rear extension - Compressor - Remote control - New alternator (replaced last year) - High-pressure washer - Cold and hot water - Heating in all cabinets - Central locking in all cabinets - Sink - Refrigerator - Sandblasters - Light tower can be raised 3 meters - Warning lights can be raised 3 meters - Flashers - Camera on the side and rear - Spreading nozzle on the cameras - Webasto - AC/climate - Bed - What is permanently mounted in the cabinets is included - Fastening systems, brackets and some chains are removable - Can come with winter tires with studs for an additional price. Fodpfjwvy Tvjx Agdsft - Video available - Delivery by agreement Description: 2004 Mercedes Actros 4448 8x8 heavy-duty truck with SWS body. There are 3 winches in the back. 2x 25 tons and one of 35 tons. The 35-ton winch can be used, but the owner says it should be replaced. Everything that is permanently mounted in the cabinets is included plus some chains. The owner believes the water tanks are around 400 liters per tank. A new alternator was replaced last year for around 42,000 NOK Light tower can be raised. The Tungberger is going to have a major service in Finland, so the mileage may increase. The car has been used very little and the previous owner left it in storage for 10 years. Km: 150000 HK: 476 Technical approved: Yes EU-approved until: 15.05.2026 Own weight: 29020 Total Weight: 56000 Payload: 26905 Width: 255 Length: 1060 Euro: 3 Model: Actros 4448

Condition: good (used), mileage: 146,487 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,100 mm, first registration: 10/2022, loading space length: 4,460 mm, loading space width: 1,920 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 195/75R16, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, traction control, = Further Options and Accessories = - Electric windows - Electric mirrors - None - Winch = Notes = Configuration: 4x2, dual rear wheels, unladen weight: 2,998 kg, gross weight: 3,500 kg, winch, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: none, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, lighting type: halogen lamps, lane keeping assist, Bluetooth, engine power: 129 kW (173 hp), fuel: diesel, Euro 6, drive technology: timing chain, transmission type: automatic, power steering, ABS, ASR (traction control), starter battery, body type: extra-long, roof rack: none, central locking, seats: 3, seating configuration: 1+2, seat material: fabric, seat adjustment: manual, oprijwagen, lier, automaat, luchtvering, airco, 3.0 L, spare wheel, tire type: summer tires = Further Information = Axle Configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: left tire tread: 7 mm; right tire tread: 7 mm; suspension: trapezoidal leaf springs Axle 2: dual wheels; inner left tread: 7 mm; outer left tread: 6 mm; inner right tread: 6 mm; outer right tread: 6 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 730 x 202 x 223 cm Weights Curb weight: 2,998 kg Payload: 502 kg Gross vehicle weight: 3,500 kg Maintenance APK (roadworthiness inspection): valid until 10/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Financial Information Leasing price: €526 per month (delivery van, 72 months); Please ask for more information and terms Ffodpfx Agexwifbjdst Identification Registration number: KLEYN1

Year of construction: 2016, condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request. Ffodpfx Aox Szhmsgdjt

Condition: used, Year of construction: 2019, operating hours: 2,950 h, Serial number: CAT0918MHH260xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21692 Specifications: 2019 model Hours: approximately 2,950 Certified until 03/26 86 kW Weight: 9,500 kg Central lubrication 2013 Multiskopan folding wing drawer Tokvam snow mill Planning bucket Tires (see pictures) Webasto Good with light Rear view camera AC/climate Radio/DAB Fodpsxt Dh Nefx Agdjft Ready for delivery   Description: 2019 CAT 918M wheel loader w/ grading bucket, flap wing bucket and snow blower. The machine is certified until March next year. Is there a video? Ready for delivery. Hours: 2950 Own weight: 9500 Year controlled: Yes Year controlled until: 03/26 Kw: 86 Model: 918M hjullaster m/ planering skuffe, klappvinge skuffe og snøfres. SE VIDEO

Condition: good (used), mileage: 58,666 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,050 mm, total height: 2,820 mm, loading space length: 4,140 mm, loading space width: 1,550 mm, loading space height: 1,790 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional options and accessories = - None - Partition wall = Remarks = Configuration: 4x2, Payload: 1,083 kg, Curb weight: 2,417 kg, Gross weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Heated seats, Bluetooth, Engine power: 125 kW (168 Hp), Fuel: Diesel, Emissions standard: Euro 6, Engine technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seating arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: V200 max, Refrigeration unit: Compressor/electric, Heating, Cooling type: Freezer, Day/night cooling: Day/night cooling, L3H2, Maxi, Freezer, Chiller, D/N Connection, 360° camera, MBUX, Air conditioning, Navigation, Euro 6, 170 HP!, Tire type: All-season tires = Additional information = General information Number of doors: 1 Registration number: V-16-LRT Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Left tire tread: 9 mm; Right tire tread: 9 mm Axle 2: Left tire tread: 9 mm; Right tire tread: 9 mm Weights Unladen weight: 2,417 kg Payload: 1,083 kg Gross vehicle weight: 3,500 kg Functional Loading height: 68 cm Refrigeration unit: engine-powered Condition Technical condition: good Ffedjwgh S Ijpfx Agdot Optical condition: good Damages: none Number of keys: 2 Financial information Leasing price: €843 per month (panel van, 72 months); Please inquire for further information and conditions

Condition: used, Year of construction: 2016, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 16129 Description: Snow plough cutter from 2016 with BM attachments. Ffsdswppg Espfx Agdjt Can be put on sms attatchments instead.  Hydraulic folding function. The blade appears in good condition. 270cm wide folded. 320cm wide all the way out. Ready to deliver. Model: brøyteskjær

Condition: used, machine/vehicle number: YV2R0P0D9GA78xxxx, mileage: 496,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21705 Specifications: EU approved until 02.09.2026 Model year: 2015 Mileage: approx. 496,000 km (will increase slightly) I-Shift gearbox Steel suspension in front, air suspension in rear Tires (see pictures) Retarder Euro 6 Length: 735 cm Width: 255 cm Wheelbase: 340/137 cm Curb weight: 14,360 kg 6x4 Fsdpjxt Dfzofx Agdeft 751 hp Equipped for snow plowing Extra driving lights Tow hitch Bed Radio/CD Climate control / AC Description:Volvo FH16 tandem tipper truck from 2015. The truck is equipped for snow plowing and EU approved until September 2026. Can be delivered at short notice. Km: 496000 HK: 750 Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 14360 Total Weight: 30000 Payload: 15565 Width: 255 Length: 735 Euro: 6 Model: Fh16 6x4 Brøyterigget Tippbil SE VIDEO Gearbox: Automatic

Condition: used, Year of construction: 2003, operating hours: 9,530 h, Serial number: L45BD194xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19809 Specifications: - 2003 model - Hours: Approx. 9530 - Weight: 9000 kg - 74.9 kW - Tires (see pictures) - Chains - Quick coupler - Bucket - ​​Total width: Approx. 255 - Pallet forks - Rotor lamp - Video - Ready for delivery Description: Ffodpfx Agev U Slpjdjt Volvo L45B from 2003. The loader is sold with bucket and pallet forks. Last service performed at 9300 hours, next service is at 9800 hours. Video attached. Ready for delivery. Hours: 9530 Own weight: 9000 Total Weight: 9000 Width: 255 Kw: 74,9 Model: L45B