Used Spindle Grinding Machine for sale (64,935)

Condition: used, Year of construction: 1971, grinding length 700 mm grinding width 500 mm Magnetic table 700 x 500 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Dsdeygx Dtepfx Afnokh Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0244, center height: 175 mm, grinding length: 1,000 mm, center width: 1,000 mm, grinding diameter: 348 mm, controller model: GE FANUC Series 18-T, TECHNICAL DETAILS Centre Height: 175 mm Centre Distance: 1,000 mm Max. Grinding Diameter: 348 mm Grinding Length: 1,000 mm Max. Workpiece Weight Between Centres: 250 kg Dkedpfeyhn Epex Afnoh Grinding Wheel Diameter: 500 mm Grinding Wheel Width: 100 mm Grinding Wheel Peripheral Speed: 45 m/s Longitudinal Slide Travel: 1,400 mm Longitudinal Slide Feed Rate: 8,000 mm/min Cross Slide Travel: 340 mm Cross Slide Swivel Range: +9/-9° Cross Slide Feed Rate: 8,000 mm/min Workpiece Spindle Head Max. Speed: 1,000 rpm Swivel Range: +30/-45° Tailstock Quill Taper: 4 MT Tailstock Quill Travel: 50 mm Connection: 50 Hz, 3x 400 Volt Grinding Spindle Motor: 15 kW MACHINE DETAILS Control: GE FANUC Series 18-T Connection: 50 Hz, 3x 400 Volt Grinding Spindle Motor: 15 kW Total Power Requirement: 27 kW Apparent Power Requirement: 16 kVA Dimensions & Weight Dimensions (L x W x H): 4,410 x 3,550 x 1,900 mm Machine Weight: approx. 5,100 kg EQUIPMENT Plunge Grinding MARPOSS Measuring Head Set of Grinding Wheels

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7791, overall weight: 5,000 kg, workpiece height (max.): 25 mm, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Workpiece diameter: 5 - 60 mm Max. workpiece height: 1 - 25 mm Number of grinding heads: 2 Configuration: Double-sided (top, bottom) Grinding wheel outside diameter: 457 mm Dodpoyhn Dlefx Afnekh Grinding wheel speed: 24 m/s MACHINE DETAILS Voltage: 380 V Grinding motor power: 2 x 15 kW Dimensions & weight Dimensions (L x W x H): 4,000 x 3,000 x 2,700 mm Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 04374, grinding length: 1,000 mm, grinding width: 700 mm, grinding wheel diameter: 406 mm, table load: 1,000 kg, controller model: SIEMENS SINUMERIK 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding width: 700 mm Travel X-axis: 1,120 mm Travel Y-axis: 690 mm Travel Z-axis: 635 mm Maximum workpiece weight on table: 1,000 kg Table length: 1,200 mm Table width: 500 mm Maximum grinding height above table: 650 mm Dkjdpoyhnv Uofx Afnoh Grinding wheel diameter: 406 mm Grinding wheel width: 100 mm Grinding wheel bore: 152 mm Grinding wheel speed (fixed): 1,400 rpm Maximum table speed: 40 m/min Max. automatic cross-feed (infinitely variable): 2 m/min Max. automatic vertical feed: 2 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Connection: 50 Hz 3x 400 Volt Grinding spindle motor: 11 kW Total power requirement: 31 kW Dimensions & Weight Dimensions (L x W x H): 4,750 x 3,485 x 2,680 mm Machine weight: approx. 7,800 kg EQUIPMENT Coolant system Paper filter unit Electro-magnetic chuck (1,000 x 500 mm) Set of grinding wheels Lamp

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Dkjdpfx Afeyhnrvjnjh Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding device (without spindle) Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 318 BG 75, grinding length: 800 mm, grinding width: 300 mm, grinding wheel diameter: 250 mm, controller model: CNC QUICK (SIEMENS 805, PLC), number of axes: 2, TECHNICAL DETAILS Grinding length: 800 mm Maximum grinding width: 300 mm Grinding wheel diameter: 250 mm Axes: 2 Table length: 800 mm Table width: 300 mm Maximum distance between table and spindle center: 600 mm Maximum width: 70 mm Width: 50 mm Bore: 51 mm Table speed: from 2 m/min to 35 m/min Creep feed: from 2 m/min to 1,000 m/min Automatic cross feed: from 1 mm/min to 10,000 mm/min Automatic vertical feed up to: 10,000 mm/min MACHINE DETAILS Control: CNC QUICK (SIEMENS 805, PLC) Connection: 50 Hz 3x 400 V Dsdeyhnlpjpfx Afnokh Grinding spindle motor: 6.6 kW Total power requirement: 22 kVA Machine weight: 4,500 kg EQUIPMENT Coolant system Paper filter unit Coolant/fume extraction unit Coolant temperature stabilization Electro-magnetic chuck length: 800 mm Electro-magnetic chuck width: 300 mm Dressing unit TAG Profile dressing unit TAD Electronic balancing device Lamp Complete splash guard cabin RS 232-C, V 24 interface

Condition: used, Technical details: weight of the machine ca.: 7,5 t Out of valve slide production: Dedpfxjyg Npae Afnokh Lidköping centerless grinding machine Lidköping CL-4-B *

Condition: used, Technical details: Dodpfx Aew Sw Rcjfnokh weight of the machine ca.: 7,5 t Out of Valve slide production line: Lidköping centerless grinding machine: Type CL-46 *

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Dodpfjw Rrvwsx Afnokh Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: ready for operation (used), Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 ical angle +/- 45 ° slide stroke 100 mm number of teeth 5 - 150 clamping length max. 350 mm Dsdpfx Afoygm Ruonekh control Siemens 840 D Powerline rated capacity 38 kVA dimensions of machine 2,45 x 2 x H = 2,5 m weight of the machine ca. 8 t CNC-controlled gear grinding machine. The Siemens CNC control allows the input of all relevant gear data and the setup of the workpiece in dialogue with the control system. The programming language (German/English) is switchable, and a DNC interface is available for data input and output. The machine operates using a continuous gear grinding process with an automatic grinding cycle. The workpiece swivel angle is electronically controlled, quickly and precisely, and hydraulically clamped, resulting in faster setup times and easier part loading. Hydraulic workpiece clamping with external collet and counterpoint in the workpiece slide, complete work area cover with sliding doors, separate switch and control cabinet, separate hydraulic system in the cabin. No associated coolant system is included (central supply). A cooling system with suction belt filter, Hoffmann, model HSF 150 SE/K, yearof manufacture 2007, can be purchased separately from another provider. Siemens control, tank capacity 2800 l, flow rate 100 l/min, 46 kW, weight 4.5 t, dimensions 3.7 x 2.5 x 3.56 m. This is a used machine; therefore, we sell it without any warranty.

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m Dsdpjvbgr Rsfx Afnekh dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Dksdpfx Afevc Apbjnjh Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle Dedpfsu Ngk Tex Afnokh -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide Djdpfxou Ngr Ds Afnjkh accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390 mm table speed: 2,5-25 m/min table surface area: 250 x 1000 mm distance table - spindle center: 550 mm dimensions of grinding wheel: Ø max. 315 x 13-63 x Bohrung Ø 75 mm control voltage: 220 / 50Hz V/Hz total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 3,35 x 1,5 x 2,10 m Die Maschine befindet sich derzeit in der technischen Abteilung. Dkedpfxou Ngn Ss Afnoh *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 500 mm Djdjvc Aw Eopfx Afnokh workpiece height: 500 mm table surface area: 1000 x 450 mm magnetic plate size: 1005 x 500 x 84 mm table speed: k.A. m/min table adjustment: längs: 1100 mm table adjustment: quer: 500 mm grinding spindle speed: 1420 - 2840 U/min grinding head vertical adjustable: 700 mm dimensions of grinding wheel: Ø 280 x 50 mm weight of the machine ca.: 2,7 t dimension machine xH: 3,1 x 2,0 x 2,4 m dimension coolant device LxWxH: 3,0 x 1,1 x 0,85 m dimensions of hydaulic: 750 x 600 x 850 mm dimension control panel: 0,65 x 0,85 x 1,3 m Equipment: Dressing device Holder for dial gauge Coolant filter system Hydraulic unit Manual control unit *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Djdpfx Afsvc An Djnskh Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1976, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 400 mm table speed: 2 - 18 m/min magnetic plate size: 600 x 200 mm Max. Table-movement horizontal: 700 mm Max. Table-movement across: 230 mm table adjustment: Quervorschub: 0,1 - 2 mm/Hub ° table speed: 2 - 18 m/min dimensions of grinding wheel: max. Ø 200 x 20 x Ø 51 mm grinding spindle speed: 2800 U/min feed of spindle: vertical 0,01 total power requirement: 3,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,4 x 0,2 m Currently there is a grinding wheel size Ø 160 x 18mm on the machine. There is a dressing device (without diamond) on the spindle. Magnetic clamping plate progress type FE 200/600; 220V / 110V coolant tank div. foot blocks Toothed rail 1000mm Dkjdpfxeu Ngl Ds Afnjh *

Condition: used, Year of construction: 1974, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 400 mm magnetic plate size: 630 x 200 mm Max. Table-movement horizontal: X-Richtung max. 710 mm Max. Table-movement across: Y-Richtung max, 250 mm table load capacity: 110 /1100N) kp table speed: 1,5 - 18 m/min dimensions of grinding wheel: max. 200 x 20 x Ø 51 mm grinding wheel dimensions:: gespannt: Ø 142 x 20mm grinding spindle speed: 2800 U/min feed of spindle: 0,01 mm total power requirement: 5,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimensions: Behälter Absaugung: 420 x Ø 350 x 680 mm The machine was used for dry grinding. -very good condition -without dressing device Dedpfx Asu Ngmbsfnjkh -dust extraction -machine lamp *

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm Dksdpfx Afsu Ngrqjnoh voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,1 x 1,0 x 1,7 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. Dodpfx Aou Ng Irjfnjkh *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories * Dkedpfou Ngxdex Afnsh

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Djdpfx Asvc Aw Sefnjkh Coolant: System with feed Heidenhain measuring device *

Condition: like new (used), Year of construction: 2019, Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image PC control Okamoto Travel X-axis: 600 mm Travel Y-axis: 22.5 - 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges Dksdpfxsyhdque Afnjh - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine approx. 4,5 t dimensions of the machine approx. 3400 x 2647 x 2203 mm

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area approx. 550 x 250 mm Electromagnetic clamping plate 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Djdpfxewlbz Te Afnekh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel