Used Spindle Moulder Feed for sale (19,438)

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Ncjdpfx Ajif Sg Seb Tsn Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition Ncodpfxefxg T Uj Ab Tjn

Condition: good (used), Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates Njdsykpt Topfx Ab Tocn -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg

Condition: used, material width 45 mm material thickness 45 mm feed length 100 mm compressed air 6 bar clamping force of fastening pincer 25000 N clamping force of moving pincer 15000 N feeding force 10000 N weight 0,1 t Dimensions (WxDxH) 0,6 x 1,0 x 1,0 m SPECIAL DEAL as is where is Nodpfjylzzlsx Ab Tscn WITHOUT putting into operation / WITHOUT additional work free loaded to truck hydraulic pincer feed - with special clamping jaws for profiles

Condition: used, material width 200 mm Nsdjvuuntspfx Ab Tecn material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Nedjxt Ngqepfx Ab Tjcn Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: repair required (used), 3x SCHÜTTE SF40 offered as a package at a low price – machines require overhaul Ncsdpfxjylhp Nj Ab Ten

Condition: used, 2x 6-spindle bar automatics as a package Nsdpfxjylhlqj Ab Tscn Make: INDEX Model: MS25E (1 machine defective, used as a parts donor)

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. Nedpfx Abjxc Idme Tjcn *

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Nsdpfx Asyizxrsb Tjcn Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Nodpfx Aboyk U Tlo Tscn

Condition: used, Year of construction: 2012, Number of boring spindles 5 St. Ncodpfx Ajyk Iddjb Ton Working width 20-230 mm Working height 8-160 mm

Condition: new, Year of construction: 2026, Number of boring spindles 6 St. Working width 20-230 mm Ncsdpfx Aoyk Icmeb Tsn Working height 8-160 mm

Condition: new, Year of construction: 2026, working length 1000-1600 mm working width 40-150 mm Thickness 10-80 mm Ncjdpfx Abeyk Iafs Tsn

Condition: new, Year of construction: 2026, Working width 180 mm Nsdpfxoyk H U Uo Ab Tocn Feed motor 3 kW weight of the machine ca. 2750 kg

Condition: new, Year of construction: 2026, Feed motor 5,5 kW total power requirement 58,3 kw weight of the machine ca. 4000 kg Ncjdpfx Absyk H T Rj Ton

Condition: new, Year of construction: 2026, Dimensions (L/W/H) 1400x2450x2800 mm Nedpsyk H Twjfx Ab Tecn Total pressure 400 to weight of the machine ca. 12000 kg

Year of construction: 2026, condition: new, working length 1000-1600 mm Njdpfxsyk H Tds Ab Tocn Working width 40-150 mm Thickness 10-80 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Total power requirement 0 kW Weight 6000 kg Ncedpfjv Ucirjx Ab Ten

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Total power requirement 0 kW Nsdpfxsv Uchne Ab Tecn Weight 6000 kg

Condition: new, Year of construction: 2025, feed 2-22 m/min Weight 60 kg Nodpovz E Ukjfx Ab Tecn Total power requirement 0,4 kw

Condition: used, Year of construction: 1993, Catalogue number 7705 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 160mm – 4 spindles: 1) Lower horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm; (spindles 2 and 3) 11kW 4) Upper horizontal: 220mm with electric height adjustment, 7.5kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40mm - Top: 4 toothed, steel infeed rollers - Top: 1 double rubber outfeed roller Nedjyla Rxspfx Ab Tecn - Bottom: rubber outfeed roller - Feed on Cardan shafts - Infinitely variable feed speed adjustment - Feed motor: 2.2kW - Lift motor: 0.55kW - Electrically adjustable planing thickness - Infeed table length: 1970mm - Central lubrication - Extraction port diameter: 3x120mm, 140mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 28,900 PLN Net price: 6,880 EUR, depending on rate 4.2 EUR (Prices subject to change with exchange rate fluctuations.)

Condition: excellent (used), Number of boring spindles 4 St. Working width 180 mm Working height 120 mm Ncedjykvagepfx Ab Ton Feed speed ca. 10 m/min m/min.

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Nedpowqr Rvsfx Ab Tscn Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 68-3-2329, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect within the timeframe 08.04.26 to 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Maximum material feed: 260 mm Maximum turning length: 155/225 mm Ncsdpfx Aboyk A Hts Ten Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A EQUIPMENT Configured for 6 spindles