Used Spindle Retainer for sale (12,762)

Condition: like new (used), power: 46 kW (62.54 HP), rotational speed (max.): 18,000 rpm, SPL Motor Spindle HSK-A63 46 kW 18000 rpm Crsdpfx Akeyr Aavs Aei Manufacturer: SPL Spindel und Präzisionslager GmbH Type: Motor spindle Tool holder: HSK-A63 Power: 46 kW Rated speed: at 9880 rpm Maximum speed: 18000 rpm Lubrication: Lifetime grease Bearings: Hybrid bearings Cooling: Water cooling Coolant flow rate: 8 l/min Maximum pressure: 7 bar Protection class: IP65 Balancing quality: G1 Spindle head seal: Purge air Radial run-out accuracy: 2 µm Axial run-out accuracy: 2 µm Radial run-out accuracy at 250 mm distance: 12 µm Rotating parts mass moment of inertia: 0.0196 kgm² Front spindle diameter D1: 151 mm Bearing diameter D2: 174 mm Diameter LB: 164 mm Overall length L: 614 mm Material number: 90010004149

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Csdpfx Aksyzy T Te Aori Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: used, Year of construction: 1996, Used, excellent condition Partially overhauled, new switches Cedjy Ay Dnspfx Ak Ajri Spindle run-out 0.03 mm Motor newly mounted and rewound Make: Lazzari Model: Base 45 Year of manufacture: 1996 Machine-No.: 9601076 CE type-tested Motor power: 4.0 kW Tiltable 45° Automatic brake 5 speed settings: 3 / 4.5 / 6 / 8 / 10,000 rpm Forward/reverse operation Table size: 1100 x 700 mm Spindle shaft diameter: 30 mm Control panel on top Extraction port: diameter 120 / 120 mm Space requirement: approx. 1100 x 1200 x 1400 mm Weight: approx. 490 kg Total connected load: 4 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, second hand Make Comag Spindle diameter 30 mm Table size 900 mm x 900 mm Extraction connection D 120 mm Space requirement approx. 900 mm x 1100 mm x 1000 mm Crsdpfx Aeyz Dd Nek Aoi Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without guarantee and warranty

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner Crjdpfx Asycvfysk Aoi The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Technical Specifications of the GT24 Positioner Type Neodymium adapter for spindle positioning Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Condition: used, used, good condition, low operating hours Machine thoroughly cleaned, lubricated Test run performed Spindle runout measured max. 0.1 mm Manufacturer: Bäuerle Csdoycxg Hspfx Ak Aeri Model: SFM 2 Machine no.: B1533 tilt range from -5° to +45° mechanical brake 6 speed levels: 2800/4500/5600/9000/6000/12000 rpm forward/reverse rotation Table size: 1100 mm x 900 mm spindle diameter: 30 mm cast iron fence jaws milling fence with fine adjustment extraction port D 120 mm required space approx. 1100 x 1100 x 1200 mm weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition as inspected, without guarantee or warranty

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Codpjxz Edzofx Ak Aori

Condition: ready for operation (used), Fanuc A06B-0844-B201 AC spindle motor SN: C96ZJ1795 S, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Codpfx Aksx Dt N Ds Aeri

Condition: excellent (used), functionality: fully functional, Complete overhaul 2019 Csdpfx Ajya Aq Dsk Aori Conveyor Pick-up Threading device Broaching device 4 cross slides pos. 1, 2, 4, 5 Integrated bar feeder Cucchi BLT compact version model MULTI L-6 year 2019 ((diameter 38mm)) Tool holder, cams

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 - Year 1998 Credpfswrh Hvox Ak Aei

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw Crsdpfx Aowrxuwok Aei - Vertical right/left 7.5Kw - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom - 2nd vertical right - 3rd vertical left - 4th horizontal top - 5th horizontal bottom - 6th universal - Working width mm. 230 - Cardan feed Codpfx Aswrx Nbsk Ajri - Year 2002

Condition: used, max. dia. of grinding wheel 300 mm Codowva N Repfx Ak Ajri wheel width max 40 mm grinding spindle speed 1500 U/min engine output 1,1 kW Industrial double grinder Very quiet, low-vibration operation With two high-grade corundum discs

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-1513-B200 -Power: 26 to 45 kW -Speed: 1500 to 6000 rpm -Technical data: see photo type plate -Shaft: Ø 60 x 140 mm Crsdpfxowvfa Io Ak Aoi -Dimensions: 880/320/H410 mm -Weight: 286 kg

Condition: good (used), Year of construction: 1988, functionality: fully functional, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Year of manufacture: 1988 S/N: 8831 Robust spindle moulder with electrically adjustable height and tilt, powerful motor (7.5 kW), multiple speeds, and extensive equipment. Technical specifications: Spindle diameter: 30 mm Spindle stroke (height): approx. 150 mm Tilting range: −5° to +45° Height adjustment: electric, with digital display Tilting adjustment: electric, with digital display Fence adjustment: manual, with scale indicator Spindle speeds: multi-stage – 3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also 100–110 mm) Single-sided table extensions right side: roller/tenoning table/extra accessories with workpiece clamp and end stop ruler, angle adjustable Crsdpfx Akswt A Dxo Aei Dimensions & weight Table size: approx. 1,200 × 820 mm Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Weight: approx. 1,100 kg

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp Crjdjwudhujpfx Ak Aji All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: new, Bernardo Production Lathe Goliath 660 x 3000 incl. 3-Axis Digital Readout Technical Specifications Centre distance: 3000 mm Centre height: 330 mm Swing over bed: 660 mm Swing over gap*: 870 mm Swing over cross slide: 420 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mounting: DIN 55029, D1-8 Speed range (16 steps): 36 – 1600 rpm Longitudinal feed range (65 steps): 0.063 – 2.52 mm/rev Cross feed range (65 steps): 0.027 – 1.07 mm/rev Metric threads (22): 1 – 14 mm Inch threads (26): 2 – 28 TPI (G/1") Quill diameter: 75 mm Quill travel: 150 mm Quill taper: MT 5 Credpjxxaxnefx Ak Aji Motor power: 9.0 kW (12.0 HP) Machine dimensions (W x D x H): 4500 x 1280 x 1650 mm Approx. weight: 3990 kg * Removable bed gap: 240 mm Features • Versatile applications in general engineering, production, single-part manufacturing, etc. • The one-piece cast machine bed offers extremely high rigidity and low vibration, fulfilling a key requirement for precision turning • Modern headstock bearing with precision angular contact ball bearings • Central, user-friendly control for feeds and threading, with lead and feed screws • Rapid traverse (longitudinal and cross) as standard to minimize non-productive times • Large-dimensioned, hardened, and precision-ground gears • Removable gap bridge enables machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Electromechanical foot brake to reduce non-productive times • Excellent machining performance even during facing operations Scope of delivery • Slip clutch • Rapid traverse (longitudinal and cross) • LED machine lamp • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Face plate 630 mm • Fixed steady rest – max. bore diameter 250 mm • Travelling steady rest – max. bore diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake according to CE standard • Foot pedal with brake function to CE standard • Factory fill with Shell Tellus 46 • Coolant device • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard (swarf back panel) • Operating tools

Condition: used, 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 Serial-No. 60654 Cjdpjxu T Aljfx Ak Aeri Seitenanschlag  Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) Codpfx Aeq Hgg Uok Aeri ■ Year of construction 2007

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Cjdpfxeq Ukbps Ak Asri Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: good (used), Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 5z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 460/210/115 mm -Weight: 16.2 kg Crodpfow Dbyyox Ak Aei

Condition: excellent (used), functionality: fully functional, number of spindles: 35 Cjdsw U Aiispfx Ak Aori pneumatic head inclination

Year of construction: 1983, condition: used, machine/vehicle number: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special-purpose drilling machine for drilling holes in the lateral surface of cylindrical workpieces Drilling units: 8 units Feed system for drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40 mm Workpiece length: approx. 80 to 100 mm Workpiece clamping: hydraulic Cutting speed: hydraulically variable, stepless adjustment Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding working area) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine designed for mass production • Equipped with a sturdy machine table with chip disposal through the underside of the table center • Drilling heads are interchangeable • Machine does not have an indexing table Remarks: Codpfx Akewylwzo Ajri The machine is exclusively designed for high-volume production. The machine is in its original paint and available for inspection at our warehouse.

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. Cjdpfx Akswnm U Rs Aeri From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm Crodpfxov Tzw Eo Ak Aei - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.