Used Sprocket for sale (65)

Condition: new, Year of construction: 2024, functionality: fully functional, conveyor belt length: 58,000 mm, conveyor belt width: 1,000 mm, Equipment: documentation/manual, Selling new Conveyor belt made from 1.4mm AISI 304. Hole diameter 3mm Bwodsy Rgm Sopfx Aaisr Suitable for belt conveyor dryer or cooling system. Overall length of belt 58 running meters (ca 28 running meters of conveyor, or multifloor conveyor). Comes with 16 suitable for belt sprockets.

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm Bsdpfsf Dlzqsx Aaiowr - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Bsdpfx Aasy T Iupjiswr Operating hours: 5,426 h

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Bwodpfx Asyk Ea Asaisr

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig Bwjdjrvg N Dopfx Aaijr TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Bwodotyqizjpfx Aaior Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. Bsdpfx Asxqzmkeaiswr The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition 2 pieces available roller length: 800 mm roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Bodsgvvvlopfx Aaiewr Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Frequency inverter new Bsdpfx Aaoyxm E Reiowr Can be disassembled into 6 parts Total weight approx. 70,000 kg Hardly any signs of wear

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Bederivbvspfx Aaiowr Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: used, Year of construction: 2000, type of input current: three-phase, We offer this used Junker Jucam 5002/20 S camshaft grinding machine, year of manufacture 2000. Year of manufacture: 2000 Power rating: 60 kVA Rated voltage: 400 V Frequency: 50 Hz Control voltage: DC 24 V Fusing: 3×100 A Voltage before main switch (circuit F 001): 230 V Voltage before main switch (circuit F 002): 400 V Production information JUNKER GROUP Operating manual included 4. Technical Data 4.1 Electrical connection values Power supply: 400 V / 50 Hz Power: 60 kVA Fusing: 3 x 100 A Conductor cross-section: 5 x 35 mm² Cu Bsdpoy Dv Sdefx Aaijwr 4.2 Mechanical Data Workpiece Workpiece diameter: approx. 100 mm Max. workpiece swing diameter: 150 mm Clamping length: max. 900 mm Z-axis traverse path: max. 1000 mm Max. workpiece swing diameter in steady rest area: 150 mm Loading system Manual, with loading and unloading device Workpiece spindle head Stationary Max. speed: 250 rpm Workpiece drive: frictional connection Workpiece spindle Dimensions: 210 x 700 mm Flange diameter: 180 mm Standard collar diameter: 127 mm Lubrication: oil lubrication Tailstock spindle Longitudinal adjustment manual via sprocket Fixed centre, special version MK 3–centre Clamping pressure adjustable via hydraulics Grinding table Z-axis feed (CNC-controlled) Grinding spindle headstock X-axis infeed (CNC-controlled) Horizontal swiveling B-axis (CNC-controlled) Grinding spindle II Dimensions: 205 x 450 mm Flange diameter: 190 mm Standard collar diameter: 127 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 30 kW Speed control with frequency converter Max. speed: 4,400 rpm Balancing: electronic Grinding wheel (Grinding spindle II) Type: Borazon (CBN), ceramic bond Diameter: Ø 400 mm Bore: Ø 127 mm Grinding wheel width: 18 mm and 16 mm Max. peripheral speed: 125 m/s Steady rest Type GR – 110 – NR Diameter range: Ø 30.1 – Ø 40 mm Wheel dressing Fine dressing (circumference and flank) with diamond dressing wheel mounted on dressing spindle: Ø 110 mm Dressing spindle Dimensions: 80 x 250 mm Flange diameter: 100 mm Standard collar diameter: 75 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 1.8 kW Speed control with frequency converter Max. speed: 24,000 rpm Balancing: electronic If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Bedpexcx Amjfx Aaiowr

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Hydraulic pressure (kg/cm²) 55kg/cm² Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg Bedpei Ay Hqjfx Aaijwr

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Bwodpfx Aaowvp Ddjijr

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Bsdpfxeh R I Iue Aaiewr Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM