Used Stage Rake for sale (17,902)

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Gtjdsq A T Dwopfx Ag Tst Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Year of construction: 2007, condition: used, functionality: fully functional, Metalchem MDI-300 two-stage intensive mixer Gtodpfxoqy H Eis Ag Tjt

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Gsdpoxt Dqqefx Ag Tott

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Gtodpfx Aju Ixt Dog Tst

Condition: used, functionality: unexamined, machine/vehicle number: G&L Series SSV, Used Goulds SSV Multi-stage Booster Water Pump Gtsdpfx Agex A Ax So Tst Manufacturer: Goulds G&L Model: G&L Series SSV 3500 RPM 1.5 HP 360 PSI Max 230°F Max Complete with original manuals Sold per unit

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 13,800 mm, Year of construction: 2022, operating hours: 3,694 h, Technical information Make of engine: JCB Top speed: 29 km/h Empty weight: 11.370 kg Functional Lifting capacity: 4.000 kg Identification Serial number: JCB5A8MGVN3096768 Other information Gtodoxq Ayrspfx Ag Tet Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Tyre brand: Alliance Transport dimensions (LxWxH): 6.23x2.35x2.59 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2023, functionality: fully functional, motor manufacturer: FPT, input frequency: 50 Hz, Manufacturer: PRAMAC Godpfx Agjtq Hcce Tett Sound pressure level at 7m dB(A) : 64 Continuous power: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: FPT IVECO F 34 TCA Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 3400 cm³ Intake: Turbo/NK Speed: 1500 rpm Starter: 12V Engine control: Electronic Exhaust gas recirculation, particulate filter, catalytic converter, Consumption 3/4 load: 8.32 liters Consumption at full load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) DEEP SEA ACP Digital control DGUV TYPE B Higher-level insulation monitor Sockets with Fi type B 1x 63A 400V /5P 1x 32A 400V /5P 1x 16A 400V /5P 1x Schuko Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel tank: 209 liters Sound insulation hood: RAL 9016 white Main battery switch Oil drip tray Fuel three-way valve WSP water-separating diesel filter Document holder Galvanized base frame with forklift pockets

Condition: used, GENERAL Gtsdpfx Aexqclujg Tjt Miscellaneous: This multi-stage steam jet vacuum pump with surface condensers is an efficient system for generating vacuum in industrial applications. The pump utilizes the energy of steam, which expands through nozzles in multiple stages and entrains the air or gases to be evacuated. The surface condensers condense the steam after each stage to maximize efficiency and minimize energy consumption. This system is commonly used in applications that require a high and stable vacuum level, such as in the chemical industry. Location: Bremen Condition: used

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge Gsdpexf Uukofx Ag Tett - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Gtjdpfexu I A Tjx Ag Tst

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 4 h, load capacity: 3,500 kg, lifting height: 6,500 mm, free lift: 2,650 mm, fuel type: gas, mast type: triplex, construction height: 3,375 mm, fork length: 1,200 mm, total length: 2,760 mm, drive type: Treibgas, construction width: 1,285 mm, LPG forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tires size: 250-15 sit black, magnum 7.00 Rear tires size: 6.50-10 sit black, magnum 5.00 Battery voltage: 12V Gedpfxswruh He Ag Tott Battery Ah: 44Ah Battery manufacturer: Varta Battery year of manufacture: 2022 Description: Standard equipment: SAS (System for ACTIVE stability) ORS (Grammer driver's seat MSG65) OPS (Optimal personal protection) Tilting steering column Fully hydraulic power steering Multifunction display in the dashboard 3-way catalytic converter Side shift, Side shift pre-installed, make Kaup, type 3T151P2 Width: 1,170 mm Front work light, roof cover,

Condition: excellent (used), Manufacture: Aerofoil Type: 30J 26° JAR Blade diameter: 750mm 2 stage Air transport: approx. 5000 m3/h++ 110V 5.5A, 0.48hp, direct current (DC) Godpfxek Nli Ho Ag Tott

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley Gedpfx Agsw U Ty Ej Tett -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Year of construction: 1998, condition: excellent (used), functionality: fully functional, I am selling or leasing a ship landing stage for vessels up to 270 tons with a 15-meter gangway, as well as 2 pedestrian/temporary bridges, each 12 meters in length. Length: 10 meters, width: 3 meters, height: 1.20 meters, draft approx. 0.25 meters Weight approx. 8 tons I am offering a passenger vessel pontoon 10 x 3 meters complete with all accessories and structural documentation. Pontoon 10 x 3 meters, matching 15-meter gangway, suitable compression struts including all fittings and bolts, mooring winch, chains, ropes, and tensioners. Calculations and drawings for any potentially required onshore foundations are available. Gtjdpfx Aexchz Ejg Tet Further details by phone or on site.

Condition: excellent (used), The set consists of 18 elements and was developed as a step for a coordinate measuring machine measuring 6.00 m x 2.50 m. It can also be used as a mobile stage or platform. Minimum height: 0,5 m Gtodpfxefg Rkcj Ag Tst edge length largest element: approx. 2.50 m

Condition: used, lifting height: 64,000 mm, Year of construction: 2022, operating hours: 1,382 h, Weights Empty weight: 86.000 kg Functional Lifting capacity: 80.000 kg Identification Serial number: TE0080CB3086 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Gsdpotr Np Tefx Ag Tett Carrier engine: - Counterweight: 32000 Transport dimensions (LxWxH): 15.17x3.49x3.67 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 821 kg, total length: 2,150 mm, total width: 1,430 mm, total height: 1,410 mm, Frequency-controlled 2-stage screw compressor 37 kW Working pressure -0.8 MPa (approx. 8 bar) Godsv Ura Tepfx Ag Tstt Delivery rate 7.72 m³/min at 0.8 MPa Super soundproof

Condition: excellent (used), Manufacturer: Grundfos Gtodjncd A Nepfx Ag Tjt Type: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: refurbished (used), Two stage cheese cutter for blocks of Cheddar, Mozzarella or Gouda cheese Gtodpfjtuuzbox Ag Tot Load through side door on roller conveyor First cut pushed upwards on air ram through wire cutting frame Second cut pushed horizontally through 2nd wire cutting frame Cut pieces discharge along a roller convetor

Condition: new, ELMAG container unit SEDSSC 350WDE-Stage 3A with SCANIA DC13 071A 02 01 diesel engine with LOROY SOMER LSA 450kVA generator with DSE 7420MK2 control module with motorized circuit breaker 630A in 20' soundproof container with 1000 liter double-walled fuel tank Sound level 65 dB(A)7m incl. engine preheating with ON/OFF switch incl. trickle charge with ON/OFF switch incl. oil drain pump incl. starter battery 24V incl. 2-layer paint 300my incl. container interior lighting incl. motorized louver flap on air inlet side Standard equipment Connection: 1 direct power outlet 24V electric start Shutdown: - Emergency stop - Magento stop - Oil pressure - Oil temperature - Tank low - Overload Gtjdjt H Iquepfx Ag Tot - Short circuit ThM-SS Generator type Leroy Somer LSA 47.3 S4 (410 kVA) DSE7420 Trickle charge Cooling water preheating Electric speed controller Modbus interface Ethernet 4 dig. inputs 5 potential-free outputs Tank with drip tray Oil drain pump Sound insulation SS Lifting eyes Forklift pockets TECHNICAL DATA Voltage - frequency 400 / 50 V/Hz Maximum power 3~400V 330 kVA Continuous power 3~400V 300 kVA Power 3~400V cont. 433 A Fuel type Diesel Speed 1500 rpm Cooling water-cooled Engine type SCANIA DC09 072A 02 03 Exhaust stage 3A Engine power 261 kW Displacement 9300 cm³ Cylinder 5 Tank capacity 1000 l Consumption at 75% load 46 l/h Running time per tank filling at 75% load 21.7 h Voltage regulation AVR Protection class 23 IP Dimensions LxWxH 6060x2440x2590 mm Weight (without fuel) 3760 kg Sound power according to RL 2000/14/EG, 2005/88/EG 90 LWA Sound pressure level at 7m 65 dB(A)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate Godpfxjhgblkj Ag Tjtt CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: used, lifting height: 64,000 mm, Year of construction: 2022, operating hours: 3,995 h, Weights Empty weight: 86.000 kg Functional Lifting capacity: 80.000 kg Identification Serial number: TE0080CB3095 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Godpfstr Ihusx Ag Tjtt Counterweight: 32000 Transport dimensions (LxWxH): 15.17x3.49x3.67 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, total length: 7,500 mm, total height: 3,400 mm, total width: 3,800 mm, warranty duration: 12 months, inner dimension length: 7,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, 🧩 Custom-Built Solution This washing system is manufactured to order. We can customize dimensions, number of stages, heating power, pump configuration, and automation level according to your individual requirements. 🟦 Automatic 5-Stage Washing Machine – Modern Surface Preparation System Modern, fully automatic spray washing system designed for surface preparation of steel and aluminium components before powder coating or other finishing processes. The unit features separate treatment chambers, each dedicated to a specific chemical stage, ensuring optimal cleaning and pretreatment quality for every material. Equipped with top transport rails, independent liquid circuits, and precise control of temperature and process time, this washing system offers high efficiency, repeatability, and low operator involvement. Perfect solution for manufacturers seeking a reliable, energy-efficient and fully automated cleaning system for metal parts. 🔹 Technical Specifications - Working chamber dimensions: 7000 × 1500 × 2200 mm (L × W × H) Gtjdpfxsxlziho Ag Tot - Overall dimensions: 7500 × 3800 × 3400 mm - Top transport: 3 rails 60×60×4 - Non-through chamber design - 5-stage process - Independent closed liquid circuits - Washing via pressure pumps and spray nozzles (side and top) - 4 tanks: * 2 heated and thermally insulated (for chemicals) * 2 for water / demineralized water - Tank capacity: 2500 L each - Heating power: 2 × 36 kW (electric heaters) - Total electrical power: 90 kW - 5 pumps × 3.0 kW, alternating operation - Automatic transition between washing stages - Adjustable temperature and process time - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Precise and repeatable washing of steel and aluminium components - Separate chambers and liquid circuits – no cross contamination - Fully automatic control and stage switching - Adjustable temperature and time per stage - Thermally insulated tanks for energy efficiency - Can be integrated with coating or production lines

Condition: used, Year of construction: 2022, operating hours: 4,300 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture: 2022 Currently 4,300 operating hours Equipment: 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast weight 900 kg CIS+ operating terminal, color display CMATIC incl. 2 engine speed memories (CIS+) Task Control Basic activation, on tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year CLAAS Remote Service incl. five-year license ELECTROPILOT with reverse function Steering interface prepared Steering interface activation Electronic hitch control, standard EHC Rear hitch lower links, catch hooks Cat. 3 Lower link stabilizers, automatic Gsdpswblkkofx Ag Tett Long hydraulic top link, catch hooks Cat. 3 Drawbar support with insert for swinging drawbar Swinging drawbar with ball coupling Automatic trailer hitch Compressed air brake system (dual and single-circuit prep.), incl. air dryer Hydraulic system load-sensing, variable pump 150 l/min, 200 bar 4 spool valves, electrohydraulic proportional Power Beyond, load-sensing couplings with flat-face connectors CMATIC - stepless transmission 50 km/h transmission ratio PROACTIV front axle with brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-spline and 1 3/4" 6-spline Parking brake on REVERSHIFT lever CMATIC 2.0 - cruise control deactivation via drive pedal (CIS+) 264 hp max. output, 261 hp homologated nominal output, ECE R 120 Main battery switch, electronic Air compressor Engine brake Cab with 4-point suspension Roof with sunroof, rear-opening Rear window for 4-post cab, tinted Rear window wiper, incl. right side wiper Electric mirror, incl. wide-angle mirror Rear fender extensions, rear fender outer width 2.75 m Removable toolbox, left Additional interface sockets 2 auxiliary driving headlights, A-pillar Oversize tail lights, halogen with warning boards 4x halogen driving lights, 2x halogen work lights bonnet Work lights halogen: 4x front roof, 4x rear roof Working lights LED – premium Comfort seat, fabric, semi-active lateral suspension Passenger seat with safety belt Automatic climate control, incl. preparation Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Internal No.: 11060349

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm Gtodehgbhnopfx Ag Tst CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.