Used Rake Angle for sale (7,324)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke Dwjdpfx Apemck Ryswea - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 1996, Angled conveyor belt Axmann 4066 warehouse no.: 503611 type / device: belt conveyor manufacturer: Axmann type: 4066 year of construction: 1996 Angled conveyor belt Discharge height approx. 1290 mm + 370 mm adjustment range Mobile on casters Dwjdpfjw N Rm Sox Apwoa Bending range approx. 2000 mm discharge height: 1290 mm (+ 370 mm) Belt width: 250 mm Belt length: ca. 4000 mm (2 x 2000 mm) distance of the slats: 410 mm height of the slats: 20 mm

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Profile height max. 140 mm Dwsdpjzrmcmjfx Apwea Stanzhöhe max. 93 mm Punching hub: 15 mm Presskraft 45 kN Weight approx. 280 kg

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal Djdpoxn T Smefx Apwewa - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Djdpezpya Hofx Apwowa Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dwsdpfx Aovvi Ttspwoa Dimensions: approx. 3700 x 2000 x 1600 mm Machine without tools Location: Nattheim

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Dwedswhzg Ujpfx Apwja Location: Nattheim

Condition: good (used), Clamping angle, clamping aid Dwjdpfx Apjzn I Nmswea -Clamping angle: for workpiece clamping -Wall thickness: 36 mm -Groove: 72x22 mm -Dimensions: 370/205/H240 mm -Weight: 32.6 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm Djdpfx Aozn I E Uepwewa -Groove: 45x24 mm / 34x18 mm -Dimensions: 270/145/H200 mm -Weight: 15.5 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Dimensions: see photos -Dimensions: 310/170/H145 mm Dwedpfxjznircs Apwoa -Weight: 24.1 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit Dwsdpozm Tmnjfx Apwoa -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die Djdpfx Apjzm Tkgjwewa -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Condition: good (used), Inclined roller conveyor, Mosca, SRF – used: Dwodjzpf Icepfx Apwja Price ex works: only €1,950.00 (net) ex works! Manufacturer: Mosca Type: SRF Year of manufacture: unknown Further details to follow Condition: good Available: immediately Location: Erfurt area

Condition: good (used), Year of construction: 2015, Inclined roller conveyor, Mosca, SRF – used: Price ex works: only €2,950 (net) ex works! Manufacturer: Mosca Type: SRF Year of manufacture: 2015 Machine number: 109867 1L+N+PE, 50-60Hz, 100-240V, Dwsdpozpf Hxjfx Apwja 2.5A, max. 16 A Condition: good, Available: from approximately the end of October 2026 Location: Erfurt area

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Dwodpfsxf Ur Nox Apwja

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Dwjdpfx Aeznn Hlopwea Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: ready for operation (used), Steel angle, small Length x Width x Height: 800 mm x 710 mm x 840 mm Thickness: 60 mm Dwedpfxjztfbdo Apwsa Weight: 480 kg

Condition: ready for operation (used), Large steel angle Dsdpfx Aoztd U Ajpwowa L x W x H: 720 mm x 650 mm x 1550 mm Thickness: 65 mm Weight: 630 kg

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. Dsdpfxsn Nv Tis Apwjwa CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, overall weight: 10,200 kg, positioning accuracy: 0.1 mm, type of input current: three-phase, total height: 2,300 mm, total length: 6,000 mm, total width: 2,000 mm, cutting width (max.): 450 mm, machine base height: 850 mm, working height: 850 mm, Double blade guillotine, electric movement of the movable blade via ball screw, lower rear movable blade, electric rear stop, 2 lasers, 10° cutting angle for improved cutting quality and better veneer penetration, weight: 10,200 kg, new PLC. Djdpfx Aowy Irbepwjwa

Condition: new, Year of construction: 2018, Automatic angle welding machine Manufacturer: Diez Type: AWS4535 Year of manufacture: 2018 No operating hours! Dwsdpfx Apewriuuowoa Welding frame: 500 x 350 mm Band width: 32 mm External dimensions: 170 x 130 x 135 cm 22726

Condition: used, This listing is for the Eppendorf Fixed Angle Rotor FA-34-6-38 The unit is in full working condition and ready for immediate use. Designed for high-speed centrifugation, this rotor accommodates up to 6 x 38 ml tubes and ensures reliable sample separation with precision engineering and durable construction. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Dedpfoyx Ur Eex Apwjwa • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for Eppendorf Fixed Angle Rotor FA-45-24-11 The unit is in full working condition and ready for immediate use The Eppendorf FA-45-24-11 is a high-performance fixed angle rotor designed for efficient sample separation in centrifugation applications. Built for precision, it supports consistent results in research and laboratory workflows, offering durability and reliable operation for demanding environments Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Dwsdpfxeyx Uwzo Apwea • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2011, operating hours: 50 h, condition: used, machine/vehicle number: 6151704890, Demonstration tool : Desoutter Angel Grinder KA26085B7V Free Speed : 8500 rpm Grinding wheel maximum : 7x3 in. / 8x7 / 8 Dwsdpscpbf Sefx Apwja spindle thread : 5/8-11 Power : 2.82 hp Weight : 5.9 Ib.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V Dsdpfxsvptx Ts Apwewa with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free